Черногория

Intentional homicide is defined as unlawful death purposefully inflicted on a person by another person

The domain "Income and living conditions" covers four topics: people at risk of poverty or social exclusion, income distribution and monetary poverty, living conditions and material deprivation, which are again structured into collections of indicators on specific topics. The collection "People at risk of poverty or social exclusion" houses main indicator on risk of poverty or social inclusion included in the Europe 2020 strategy as well as the intersections between sub-populations of all Europe 2020 indicators on poverty and social exclusion. The collection "Income distribution and monetary poverty" houses collections of indicators relating to poverty risk, poverty risk of working individuals as well as the distribution of income. The collection "Living conditions" hosts indicators relating to characteristics and living conditions of households, characteristics of the population according to different breakdowns, health and labour conditions, housing conditions as well as childcare related indicators. The collection "Material deprivation" covers indicators relating to economic strain, durables, housing deprivation and environment of the dwelling.

Accuracy of annual economic forecasts of international organizations - European Commission, IMF, OECD, World Bank, UN LINK

Accuracy of annual economic forecasts of international organizations - European Commission, IMF, OECD, World Bank, UN LINK

Data in this domain constitute only a small part of the entire National Accounts data range available from Eurostat. Annual and quarterly national accounts are compiled in accordance with the European System of Accounts - ESA 2010as defined in Annex B of the Council Regulation (EU) No 549/2013 of the European Parliament and of the Council of 21 May 2013. The previous European System of Accounts, ESA95, was reviewed to bring national accounts in the European Union, in line with new economic environment, advances in methodological research and needs of users and the updated national accounts framework at the international level, the SNA 2008. The revisions are reflected in an updated Regulation of the European Parliament and of the Council on the European system of national and regional accounts in the European Union of 2010 (ESA 2010). The associated transmission programme is also updated and data transmissions in accordance with ESA 2010 are compulsory from September 2014 onwards. The annual data of this domain consists of the following collections: 1. Main GDP aggregates: main components from the output, expenditure and income side. nama_10_gdp: GDP and main components (output, expenditure and income   The quarterly data of this domain consists of the following collections 1. Main GDP aggregates, main components from the output, expenditure and income side, expenditure breakdowns by industry and assets. namq_10_ma: Main GDP aggregatesnamq_10_gdp: GDP and main components (output, expenditure and incomenamq_10_fcs: Final consumption aggregates by durabilitynamq_10_exi: Exports and imports by Member States of the EU/third countries 2. Breakdowns of GDP aggregates and employment data by main industries and asset classes. namq_10_bbr: Basic breakdowns main GDP aggregates and employment (by industry and assets)namq_10_a10: Gross value added and income by A*10 industrynamq_10_an6: Gross fixed capital formation by AN_F6 asset typenamq_10_a10_e: Employment by A*10 industry breakdowns Geographical entities covered are the European Union, the euro area, EU Member States, Candidate Countries, EFTA countries, US, Japan and possibly other countries on an ad-hoc basis. Data sources: National Statistical Institutes

Data in this domain constitute only a small part of the entire National Accounts data range available from Eurostat. Annual and quarterly national accounts are compiled in accordance with the European System of Accounts - ESA 2010as defined in Annex B of the Council Regulation (EU) No 549/2013 of the European Parliament and of the Council of 21 May 2013. The previous European System of Accounts, ESA95, was reviewed to bring national accounts in the European Union, in line with new economic environment, advances in methodological research and needs of users and the updated national accounts framework at the international level, the SNA 2008. The revisions are reflected in an updated Regulation of the European Parliament and of the Council on the European system of national and regional accounts in the European Union of 2010 (ESA 2010). The associated transmission programme is also updated and data transmissions in accordance with ESA 2010 are compulsory from September 2014 onwards. The annual data of this domain consists of the following collections: 1. Main GDP aggregates: main components from the output, expenditure and income side. nama_10_gdp: GDP and main components (output, expenditure and income   The quarterly data of this domain consists of the following collections 1. Main GDP aggregates, main components from the output, expenditure and income side, expenditure breakdowns by industry and assets. namq_10_ma: Main GDP aggregatesnamq_10_gdp: GDP and main components (output, expenditure and incomenamq_10_fcs: Final consumption aggregates by durabilitynamq_10_exi: Exports and imports by Member States of the EU/third countries 2. Breakdowns of GDP aggregates and employment data by main industries and asset classes. namq_10_bbr: Basic breakdowns main GDP aggregates and employment (by industry and assets)namq_10_a10: Gross value added and income by A*10 industrynamq_10_an6: Gross fixed capital formation by AN_F6 asset typenamq_10_a10_e: Employment by A*10 industry breakdowns Geographical entities covered are the European Union, the euro area, EU Member States, Candidate Countries, EFTA countries, US, Japan and possibly other countries on an ad-hoc basis. Data sources: National Statistical Institutes

Data in this domain constitute only a small part of the entire National Accounts data range available from Eurostat. Annual and quarterly national accounts are compiled in accordance with the European System of Accounts - ESA 2010as defined in Annex B of the Council Regulation (EU) No 549/2013 of the European Parliament and of the Council of 21 May 2013. The previous European System of Accounts, ESA95, was reviewed to bring national accounts in the European Union, in line with new economic environment, advances in methodological research and needs of users and the updated national accounts framework at the international level, the SNA 2008. The revisions are reflected in an updated Regulation of the European Parliament and of the Council on the European system of national and regional accounts in the European Union of 2010 (ESA 2010). The associated transmission programme is also updated and data transmissions in accordance with ESA 2010 are compulsory from September 2014 onwards. The annual data of this domain consists of the following collections: 1. Main GDP aggregates: main components from the output, expenditure and income side. nama_10_gdp: GDP and main components (output, expenditure and income   The quarterly data of this domain consists of the following collections 1. Main GDP aggregates, main components from the output, expenditure and income side, expenditure breakdowns by industry and assets. namq_10_ma: Main GDP aggregatesnamq_10_gdp: GDP and main components (output, expenditure and incomenamq_10_fcs: Final consumption aggregates by durabilitynamq_10_exi: Exports and imports by Member States of the EU/third countries 2. Breakdowns of GDP aggregates and employment data by main industries and asset classes. namq_10_bbr: Basic breakdowns main GDP aggregates and employment (by industry and assets)namq_10_a10: Gross value added and income by A*10 industrynamq_10_an6: Gross fixed capital formation by AN_F6 asset typenamq_10_a10_e: Employment by A*10 industry breakdowns Geographical entities covered are the European Union, the euro area, EU Member States, Candidate Countries, EFTA countries, US, Japan and possibly other countries on an ad-hoc basis. Data sources: National Statistical Institutes

Agricultural Statistics of Montenegro, 2014

The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections: Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States: a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups: general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections: Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States: a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups: general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

This dataset contains commitment data on aid in support of environment sustainability and aid to biodiversity, climate change mitigation, climate change adaptation and desertification from the CRS database. In their reporting to the Development Assistance Committee (DAC) Creditor Reporting System (CRS), donors are requested to indicate for each activity whether or not it targets environment and the Rio Conventions (biodiversity, climate change mitigation, climate change adaptation and desertification). A scoring system of three values is used, in which aid activities are “marked” as targeting a environment as the “principal objective” or a “significant objective”, or as not targeting the objective. The environment marker identifies activities that are “intended to produce an improvement in the physical and/or biological environment of the recipient country, area or target group concerned” or “include specific action to integrate environmental concerns with a range of development objectives through institution building and/or capacity development”. A large majority of activities targeting the objectives of the Rio Conventions fall under the DAC definition of “aid to environment”. The Rio markers permit their specific identification. Watch out for double-counting! The same activity can be marked for several objectives, e.g. climate change mitigation and biodiversity. These overlaps reflect that the three Rio Conventions are interlinked and mutually reinforcing. However, care needs to be taken not to double-count the amounts when compiling the total for aid in support of more than one Convention: biodiversity-, climate change- and desertification-related aid should not be added up as this can result in double or triple-counting. Activity-level marker data that underlie the aggregate figures presented in this dataset are available for consultation and download: see “Export”, “Related files”.

This dataset includes combined and standardized Gini data from eight original sources: Luxembourg Income Study (LIS), Socio-Economic Database for Latin America (SEDLAC), Survey of Living Conditions (SILC) by Eurostat, World Income Distribution (WYD; the full data set is available here), World Bank Europe and Central Asia dataset, World Institute for Development Research (WIDER), World Bank Povcal, and Ginis from individual long-term inequality studies (just introduced in this version).

The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections: Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States: a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups: general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections:Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States:a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups:general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections: Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States: a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups: general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections: Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States: a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups: general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

Eurostat Dataset Id:ef_pmhouspigec The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys.The data of the domain have been organised into two collections:Results of the farm structure surveys contains data from 1990 onwardsStandard Gross Margin (SGM) and Standard Output (SO) coefficients.Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy.Two kinds of Farm Structure Survey (FSS) are carried out by Member States:a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them.However for certain characteristics the Member States may use sample base for every survey.The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible.The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey.The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables.The variables are arranged into groups:one general overview with the key variables,and other specialized groups containing detailed data onland uselivestockspecial interest topics: farm labour force, rural development issues as well as management and practices.The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm).Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012.The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level.For a comprehensive description of the domain, please consult detailed structure.Regional DataData for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012.Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

Animal production statistics cover three main sub-domains based on three pieces of relevant legislation and related gentlemen’s agreements.Livestock and meat statistics are collected under Regulation (EC) No 1165/2008. They cover meat production, as activity of slaughterhouses (monthly) and as other slaughtering (annual), meat production (gross indigenous production) forecast (semi-annual or quarterly), livestock statistics, including regional statistics. A quality report is also collected every third year.Milk and milk product statistics are collected under Decision 97/80/EC implementing Directive 96/16/EC. They cover farm production and utilisation of milk (annual), collection (monthly for cows’ milk) and production activity by dairies (annual) and statistics on the structure of dairies (every third year). An annual methodological report is also collected.Statistics on eggs for hatching and farmyard poultry chicks are collected under Regulation (EC) No 617/2008, implementing Regulation (EC) No 1234/2007 (Single CMO Regulation). They cover statistics on the structure (annual) and the activity (monthly) of hatcheries as well as reports on the external trade of chicks. European Economic Area countries (EEA, Iceland, Liechtenstein and Norway) are requested to provide milk statistics, with the exception of those related to home consumption, as stated in Annex XXI of the EEA Agreement. As Iceland is now a candidate country and Liechtenstein is exempted in the Agreement, only Norway is concerned. The Agreement between the European Community and the Swiss Confederation on cooperation in the field of statistics states that Switzerland must provide Eurostat with national milk statistics. It has been amended in 2013 for covering also some livestock and meat statistics. The same statistics are requested from the candidate countries as acquis communautaire. Further data about the same topics refer to repealed legal acts or agreements. The tables on animal product supply balance sheets (apro_mk_bal, apro_mt_bal and apro_ec_bal), statistics on the structure of rearing (apro_mt_str) and the number of laying hens (apro_ec_lshen) are therefore no longer updated. The same applies to some variables (external trade of animals and meat), periods (surveys in April or August) or items (number of horses) included in other tables. The statistical tables disseminated by Eurostat are organised into three groups of tables on Agricultural products (apro), i.e. Milk and milk products (apro_mk), Livestock and meat (apro_mt) and Poultry farming (apro_ec). This last label covers statistics on hatcheries and on trade in chicks. The regional animal production statistics collected on livestock (agr_r_animal) and on cows’ milk production on farms (agr_r_milk_pr) are disseminated separately. Due to the change in the legal basis or in the methodology, the time series may be broken. This is indicated by a flag in the tables. The detailed content of each table and the reference to its legal definition is provided in the table below. Table 3.1: Data tables disseminated regarding animal production statistics <

Eurostat Dataset Id:demo_r_d3avg The regional demographic statistics provides annual data on population, vital events (live births and deaths), total and land areas of the regions and key demographic indicators for regions and statistical regions at NUTS2 and NUTS3 levels for 35 countries: each EU-27 Member State, Acceding, Candidate and EFTA countries. The completeness of the tables depends on the availability of data received from the responsible national statistical institutes (NSIs).  The label of each table indicates the lowest NUTS level for which data are available; for the upper NUTS levels data are included as well. Starting with March 2013, demographic statistics at regional level reflect the new NUTS-2010 classification for EU-27 Member States and the new statistical regions for Croatia. Countries affected by the NUTS-2010 changes are expected to transmit to Eurostat the time series for the new regional breakdown. As a general approach, the regions with no data available are not listed in the tables. For a calendar year T, the deadline of the regional demographic data collection is 15 December, and data included have a different degree of detail for regions at NUTS2 and NUTS3 levels: NUTS2 level - high level of data detail: Population by sex and single year of age at 1st January: years T and T-1Live births by single year of age and year of birth of the mother: year T-1 Deaths by sex and single years of age and year of birth: year T-1  NUTS3 level - low level of data detail: Surface area in km2 at 1st January (total area including inland waters and land area): year TPopulation by sex and broad age groups at 1st January, namely for 0-14 (0 up to 14 years), 15-64 (15 up to 64 years) and 65+ (persons of 65 years and older): years T and T-1 Live births and deaths (total number of demographic events): year T-1  Tables are updated mainly during March of the next year (T+1), but also along the year whenever revised data are sent by the official data providers. Demographic indicators at regional level are computed by Eurostat using a harmonised methodology and common concepts for all regions of all countries, namely: average population on 1st January (in thousands), population density;demographic balance and crude rates (population change, natural change, net migration including statistical adjustments, crude birth rate, crude death rate, crude rate of population change, crude rate of natural change, crude rate of net migration (including statistical adjustments));age-specific-fertility rates and Total Fertility Rates;life tables that include age-specific-mortality-rates and life expectancy at given exact age;infant mortality and crude rate of infant mortality. At national level a larger number of demographic indicators are computed, as more detailed demographic data are collected only at this level.Â

AMECO is the annual macro-economic database of the European Commission's Directorate General for Economic and Financial Affairs (DG ECFIN). The database is regularly cited in DG ECFIN's publications and is indispensable for DG ECFIN's analyses and reports. To ensure that DG ECFIN's analyses are verifiable and transparent to the public, AMECO data is made available free of charge. AMECO contains data for EU-27, the euro area, EU Member States, candidate countries and other OECD countries (United States, Japan, Canada, Switzerland, Norway, Iceland, Mexico, Korea, Australia and New Zealand).

Aquaculture, also known as aquafarming, refers to the farming of aquatic (freshwater or saltwater) organisms, such as fish, molluscs, crustaceans and plants, for human use or consumption, under controlled conditions. Aquaculture implies some form of intervention in the natural rearing process to enhance production, including regular stocking, feeding and protection from predators. Farming also implies individual or corporate ownership of, or contractual rights to, the stock being cultivated. European data on the quantity of aquaculture production, in tonnes life weight (TLW), have been recorded since 1950 [fish_aq_q]. Since 1984, data on the total value of the production in Thousand Euro are also available [fish_aq_v]. With the entry into force of the new Regulation (EC) No 762/2008 on the submission of aquaculture statistics, since the reference year 2008 aquaculture production data are collected and disseminated annually in 5 tables: Production from aquaculture excluding hatcheries and nurseries [fish_aq2a] by species, by FAO major area, by production method, by aquatic environment in TLW (tonnes live weight) and in Euro.Production of fish eggs for human consumption from aquaculture [fish_aq2b] by species, by FAO major area, by aquatic environment in TLW, Euro and Euro/Tonne.Input to capture-based aquaculture [fish_aq3] by species in Number, TLW, Euro and Euro/Tonne.Production of hatcheries and nurseries at eggs stage in life cycle [fish_aq4a] by species and intended uses in Millions.Production of hatcheries and nurseries at juveniles stage in life cycle [fish_aq4b] by species and intended uses in Millions. Every three years, these data are complemented by Data on the structure of the aquaculture sector [fish_aq5] by species, by FAO major area, by production method, by aquatic environment in Meters, 1000 of M3 and Hectares. In addition, annual methodological reports of the national systems for aquaculture statistics [fish_aq6] are provided by the EEA Member States with details on the organisation of the national systems for aquacuture statistics and the respective methods of collecting, processing and compiling the aquaculture data as well as quality aspects in line with the 'Code of Practice for the European Statistical System'. According to the Regulation (EC) No 762/2008, aquaculture production means the output from aquaculture at first sale (including production from hatcheries and nurseries offered for sale). Non-commercial leisure aquaculture is thus not accounted for. Moreover, aquaculture production of aquarium and ornamental species is excluded. Data are submitted by all Member States of the European Economic Area by the 31st of December for the preceeding year (reporting year -1). They are compiled by the respective competent authorities of the Member States, usually either the National Statistical Institute or the Ministry of Agriculture.

Aquaculture, also known as aquafarming, refers to the farming of aquatic (freshwater or saltwater) organisms, such as fish, molluscs, crustaceans and plants, for human use or consumption, under controlled conditions. Aquaculture implies some form of intervention in the natural rearing process to enhance production, including regular stocking, feeding and protection from predators. Farming also implies individual or corporate ownership of, or contractual rights to, the stock being cultivated. European data on the quantity of aquaculture production, in tonnes life weight (TLW), have been recorded since 1950 [fish_aq_q]. Since 1984, data on the total value of the production in Thousand Euro are also available [fish_aq_v]. With the entry into force of the new Regulation (EC) No 762/2008 on the submission of aquaculture statistics, since the reference year 2008 aquaculture production data are collected and disseminated annually in 5 tables: Production from aquaculture excluding hatcheries and nurseries [fish_aq2a] by species, by FAO major area, by production method, by aquatic environment in TLW (tonnes live weight) and in Euro.Production of fish eggs for human consumption from aquaculture [fish_aq2b] by species, by FAO major area, by aquatic environment in TLW, Euro and Euro/Tonne.Input to capture-based aquaculture [fish_aq3] by species in Number, TLW, Euro and Euro/Tonne.Production of hatcheries and nurseries at eggs stage in life cycle [fish_aq4a] by species and intended uses in Millions.Production of hatcheries and nurseries at juveniles stage in life cycle [fish_aq4b] by species and intended uses in Millions. Every three years, these data are complemented by Data on the structure of the aquaculture sector [fish_aq5] by species, by FAO major area, by production method, by aquatic environment in Meters, 1000 of M3 and Hectares. In addition, annual methodological reports of the national systems for aquaculture statistics [fish_aq6] are provided by the EEA Member States with details on the organisation of the national systems for aquacuture statistics and the respective methods of collecting, processing and compiling the aquaculture data as well as quality aspects in line with the 'Code of Practice for the European Statistical System'. According to the Regulation (EC) No 762/2008, aquaculture production means the output from aquaculture at first sale (including production from hatcheries and nurseries offered for sale). Non-commercial leisure aquaculture is thus not accounted for. Moreover, aquaculture production of aquarium and ornamental species is excluded. Data are submitted by all Member States of the European Economic Area by the 31st of December for the preceeding year (reporting year -1). They are compiled by the respective competent authorities of the Member States, usually either the National Statistical Institute or the Ministry of Agriculture.

This dataset shows countries and river basins' average exposure to five of Aqueduct's water risk indicators: baseline water stress, interannual variability, seasonal variability, flood occurrence, and drought severity. Risk exposure scores are available for every country (except Greenland and Antarctica), the 100 most populous river basins, and the 100 largest river basins by area.Scores are also available for all industrial, agricultural, and domestic users' average exposure to each indicator in each country and river basin.

The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections: Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States: a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups: general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections: Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States: a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups: general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

Eurostat Dataset Id:agr_r_crops

Eurostat Id: agr_r_crops   Crop statistics refer to the following types of annual data: area, production harvested and yield for cereals and for other main field crops (mainly dried pulses, root crops, fodder and industrial crops); area, production harvested and yield for a large number of fruits and vegetables humidity of the harvested crop (humidity content in %) agricultural land use. The statistics provide, for a given product, the area, the yield and the production harvested during the crop year at national level. For some products regional figures (NUTS 1 or 2) are available too. The data refer to areas under cultivation (expressed in 1 000 hectares), the quantity harvested (expressed in 1 000 tonnes) and the yield (expressed in 100kg/ha). The information concerns more than 100 crop products. The earliest data are available from 1955 for cereals and from the early 1960's for fruits and vegetables. However most Member States have started to send in data in the 1970's and 1980's. The statistical system has progressively improved and enlarged. The current Regulation (EC) No 543/2009 entered into force in January 2010. It simplified the data collection and reduced the number of crop sub-classes. At present Eurostat receives and publishes harmonised statistical data from 28 Member States broken down in: 17 categories and subcategories for cereals; 30 categories and subcategories for other main crops (mainly Dried pulses, Root crops and Industrial crops); 40 categories and subcategories for vegetables; 41 categories and subcategories for fruits; 18 categories and subcategories for UAA (Utilised Agricultural Area). For the full list of crops, please consult Annex 1 . Some data are available also for Iceland, Norway, Switzerland, Albania, Montenegro. Former Yugoslav Republic of Macedonia, Serbia, Kosovo (under United Nations Security Council Resolution 1244/99), Bosnia Herzegovina and Turkey as well. Some additional crops are covered bya Gentlemen's agreement. These data is provided on voluntary basis by the Member States. The list of crops collected under the gentlemen's agreements is included in Annex 1. The main data sources are administrative records, surveys and expert estimates. National Statistical Institutes or Ministries of Agriculture are responsible for the national data collection in accordance with EC Regulations. Eurostat is responsible for drawing the EU aggregations. Regional metadata Please note that for paragraphs where no metadata for regional data has been specified the regional metadata is identical to the metadata for the national data.  

The domain "Income and living conditions" covers four topics: people at risk of poverty or social exclusion, income distribution and monetary poverty, living conditions and material deprivation, which are again structured into collections of indicators on specific topics. The collection "People at risk of poverty or social exclusion" houses main indicator on risk of poverty or social inclusion included in the Europe 2020 strategy as well as the intersections between sub-populations of all Europe 2020 indicators on poverty and social exclusion. The collection "Income distribution and monetary poverty" houses collections of indicators relating to poverty risk, poverty risk of working individuals as well as the distribution of income. The collection "Living conditions" hosts indicators relating to characteristics and living conditions of households, characteristics of the population according to different breakdowns, health and labour conditions, housing conditions as well as childcare related indicators. The collection "Material deprivation" covers indicators relating to economic strain, durables, housing deprivation and environment of the dwelling.

Accommodation statistics is a key part of the system of tourism statistics in the EU and has a long history of data collection. Annex I of the Regulation (EU) 692/2011 of the European Parliament and of the Council deals with accommodation statistics and includes 4 sections focusing on accommodation statistics of which sections 1 and 2 include the requirements concerning rented accommodation (capacity and occupancy respectively). Data are collected by the competent national authorities of the Member States and are compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Most of the time, data are collected via sample or census surveys. However, in a few cases the data is compiled from a demand-side perspective (i.e. via visitor surveys or border surveys). Surveys on the occupancy of accommodation establishments are generally conducted on a monthly basis. The concepts and definitions used in the collection of data shall conform to the specifications described in the Methodological manual for tourism statistics. Accommodation statistics comprise the following information: Monthly data on tourism industries (NACE 55.1, 55.2 and 55.3) Monthly occupancy of tourist accommodation establishments: arrivals and nights spent by residents and non-residents Net occupancy rate of bed-places and bedrooms in hotels and similar accommodation Annual data on tourism industries(NACE 55.1, 55.2 and 55.3) Occupancy of tourist accommodation establishments: arrivals and nights spent by residents and non-residents Capacity of tourist accommodation establishments: number of establishments, bedrooms and bed places Regional data  Annual occupancy (arrivals and nights spent by residents and non-residents) of tourist accommodation establishments at NUTS 2 level, by degree of urbanisation and by coastal/non-coastal area Annual data on number of establishments, bedrooms and bed places at NUTS 2 level, by degree of urbanisation and by coastal/non-coastal area Data on number of establishments, bedrooms and bed places are available by activity at NUTS 3 level until 2011. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

Accommodation statistics is a key part of the system of tourism statistics in the EU and has a long history of data collection. Annex I of the Regulation (EU) 692/2011 of the European Parliament and of the Council deals with accommodation statistics and includes 4 sections focusing on accommodation statistics of which sections 1 and 2 include the requirements concerning rented accommodation (capacity and occupancy respectively). Data are collected by the competent national authorities of the Member States and are compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Most of the time, data are collected via sample or census surveys. However, in a few cases the data is compiled from a demand-side perspective (i.e. via visitor surveys or border surveys). Surveys on the occupancy of accommodation establishments are generally conducted on a monthly basis. The concepts and definitions used in the collection of data shall conform to the specifications described in the Methodological manual for tourism statistics. Accommodation statistics comprise the following information: Monthly data on tourism industries (NACE 55.1, 55.2 and 55.3) Monthly occupancy of tourist accommodation establishments: arrivals and nights spent by residents and non-residents Net occupancy rate of bed-places and bedrooms in hotels and similar accommodation Annual data on tourism industries(NACE 55.1, 55.2 and 55.3) Occupancy of tourist accommodation establishments: arrivals and nights spent by residents and non-residents Capacity of tourist accommodation establishments: number of establishments, bedrooms and bed places Regional data  Annual occupancy (arrivals and nights spent by residents and non-residents) of tourist accommodation establishments at NUTS 2 level, by degree of urbanisation and by coastal/non-coastal area Annual data on number of establishments, bedrooms and bed places at NUTS 2 level, by degree of urbanisation and by coastal/non-coastal area Data on number of establishments, bedrooms and bed places are available by activity at NUTS 3 level until 2011. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

Accommodation statistics is a key part of the system of tourism statistics in the EU and has a long history of data collection. Annex I of the Regulation (EU) 692/2011 of the European Parliament and of the Council deals with accommodation statistics and includes 4 sections focusing on accommodation statistics of which sections 1 and 2 include the requirements concerning rented accommodation (capacity and occupancy respectively). Data are collected by the competent national authorities of the Member States and are compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Most of the time, data are collected via sample or census surveys. However, in a few cases the data is compiled from a demand-side perspective (i.e. via visitor surveys or border surveys). Surveys on the occupancy of accommodation establishments are generally conducted on a monthly basis. The concepts and definitions used in the collection of data shall conform to the specifications described in the Methodological manual for tourism statistics. Accommodation statistics comprise the following information: Monthly data on tourism industries (NACE 55.1, 55.2 and 55.3) Monthly occupancy of tourist accommodation establishments: arrivals and nights spent by residents and non-residents Net occupancy rate of bed-places and bedrooms in hotels and similar accommodation Annual data on tourism industries(NACE 55.1, 55.2 and 55.3) Occupancy of tourist accommodation establishments: arrivals and nights spent by residents and non-residents Capacity of tourist accommodation establishments: number of establishments, bedrooms and bed places Regional data  Annual occupancy (arrivals and nights spent by residents and non-residents) of tourist accommodation establishments at NUTS 2 level, by degree of urbanisation and by coastal/non-coastal area Annual data on number of establishments, bedrooms and bed places at NUTS 2 level, by degree of urbanisation and by coastal/non-coastal area Data on number of establishments, bedrooms and bed places are available by activity at NUTS 3 level until 2011. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

Accommodation statistics is a key part of the system of tourism statistics in the EU and has a long history of data collection. Annex I of the Regulation (EU) 692/2011 of the European Parliament and of the Council deals with accommodation statistics and includes 4 sections focusing on accommodation statistics of which sections 1 and 2 include the requirements concerning rented accommodation (capacity and occupancy respectively). Data are collected by the competent national authorities of the Member States and are compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Most of the time, data are collected via sample or census surveys. However, in a few cases the data is compiled from a demand-side perspective (i.e. via visitor surveys or border surveys). Surveys on the occupancy of accommodation establishments are generally conducted on a monthly basis. The concepts and definitions used in the collection of data shall conform to the specifications described in the Methodological manual for tourism statistics. Accommodation statistics comprise the following information: Monthly data on tourism industries (NACE 55.1, 55.2 and 55.3) Monthly occupancy of tourist accommodation establishments: arrivals and nights spent by residents and non-residents Net occupancy rate of bed-places and bedrooms in hotels and similar accommodation Annual data on tourism industries(NACE 55.1, 55.2 and 55.3) Occupancy of tourist accommodation establishments: arrivals and nights spent by residents and non-residents Capacity of tourist accommodation establishments: number of establishments, bedrooms and bed places Regional data  Annual occupancy (arrivals and nights spent by residents and non-residents) of tourist accommodation establishments at NUTS 2 level, by degree of urbanisation and by coastal/non-coastal area Annual data on number of establishments, bedrooms and bed places at NUTS 2 level, by degree of urbanisation and by coastal/non-coastal area Data on number of establishments, bedrooms and bed places are available by activity at NUTS 3 level until 2011. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

Eurostat Dataset Id:tour_occ_arnrmw National data Monthly and annual data on arrivals, nights spent and occupancy rates at tourist accommodation establishments. Regional data Annual arrivals, nights spent at tourist accommodation establishments at NUTS 2 level. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

An arrival is defined as a person (tourist) who arrives at a tourist accommodation establishment and checks in. The arrivals of same-day visitors spending only a few hours during the day (no overnight stay, the date of arrival and departure are the same) at the establishment are excluded.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services (ITS), a component of BoP current account, are used, alongside with data on Foreign Direct Investment (a component of BoP financial account), to monitor the external commercial performance of different economies. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports. Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU and in millions of national currency. Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services (ITS), a component of BoP current account, are used, alongside with data on Foreign Direct Investment (a component of BoP financial account), to monitor the external commercial performance of different economies. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports. Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU and in millions of national currency. Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services (ITS), a component of BoP current account, are used, alongside with data on Foreign Direct Investment (a component of BoP financial account), to monitor the external commercial performance of different economies. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports. Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU and in millions of national currency. Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.

The Balance of Payments (BOP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of an economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, primary and secondary income), as well as on transactions which fall in the capital and the financial account. International investment position presents value of financial assets owned outside the economy and indebtedness of the economy to the rest of the world. BOP is an important macro-economic indicator used to assess the position of an economy (of credit or debit for current and capital acount, net acquisition of financial assets or net incurrence of liabilities for BOP financial account and international investment position) towards the external world. Out of BOP data, some indicators on international position of the EU and Member States are derived. Indicators on Main Balance of Payments and International Investment Position items as share of GDP are presented as percentage of GDP for given year or quarter and moving average for 3 consecutive years for: balance, credit and debit flows of current and capital accounts and of main current account  items: goods, services, primary and secondary income,net flows, net acquisition of financial assets and net incurrence of liabilities for total financial account and foreign direct investment, international investment position and net external debt at the end of reference quarter or year. Indicators on export market shares present shares of each EU Member State in total world exports of goods and services for given year, and 1-year and 5-year percentage changes of these shares, as well as shares in OECD exports and 5-year percentage changes of these shares.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a geographical region during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services, a component of BoP current account, and data on Foreign Direct Investment, a component of BoP financial account, are used to monitor the external commercial performance of different economies. Outward Foreign Affiliates Statistics (FATS) measure the commercial presence, as defined by the General Agreement on Trade in Services (GATS), through affiliates in foreign markets. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports.  Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU or in millions of national currency. Balance of Payments data coverage varies according to the collection. Some collections refer only to Euro area or EU countries, while some others' coverage includes also EU partner countries.   Several statistical adjustments are applied to the original data provided by the Member States. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.    More information on BoP is available for each specific collection: Quarterly BoP, ITS, FDI, Outward FATS, BoP of EU Institutions.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a geographical region during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services, a component of BoP current account, and data on Foreign Direct Investment, a component of BoP financial account, are used to monitor the external commercial performance of different economies. Outward Foreign Affiliates Statistics (FATS) measure the commercial presence, as defined by the General Agreement on Trade in Services (GATS), through affiliates in foreign markets. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports.  Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU or in millions of national currency. Balance of Payments data coverage varies according to the collection. Some collections refer only to Euro area or EU countries, while some others' coverage includes also EU partner countries.   Several statistical adjustments are applied to the original data provided by the Member States. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.    More information on BoP is available for each specific collection: Quarterly BoP, ITS, FDI, Outward FATS, BoP of EU Institutions.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a geographical region during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services, a component of BoP current account, and data on Foreign Direct Investment, a component of BoP financial account, are used to monitor the external commercial performance of different economies. Outward Foreign Affiliates Statistics (FATS) measure the commercial presence, as defined by the General Agreement on Trade in Services (GATS), through affiliates in foreign markets. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports.  Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU or in millions of national currency. Balance of Payments data coverage varies according to the collection. Some collections refer only to Euro area or EU countries, while some others' coverage includes also EU partner countries.   Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide 2003. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.    More information on BoP is available for each specific collection: Quarterly BoP, ITS, FDI, Outward FATS, BoP of EU Institutions.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a geographical region during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services, a component of BoP current account, and data on Foreign Direct Investment, a component of BoP financial account, are used to monitor the external commercial performance of different economies. Outward Foreign Affiliates Statistics (FATS) measure the commercial presence, as defined by the General Agreement on Trade in Services (GATS), through affiliates in foreign markets. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports.  Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU or in millions of national currency. Balance of Payments data coverage varies according to the collection. Some collections refer only to Euro area or EU countries, while some others' coverage includes also EU partner countries.   Several statistical adjustments are applied to the original data provided by the Member States. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.    More information on BoP is available for each specific collection: Quarterly BoP, ITS, FDI, Outward FATS, BoP of EU Institutions.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a geographical region during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services, a component of BoP current account, and data on Foreign Direct Investment, a component of BoP financial account, are used to monitor the external commercial performance of different economies. Outward Foreign Affiliates Statistics (FATS) measure the commercial presence, as defined by the General Agreement on Trade in Services (GATS), through affiliates in foreign markets. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports.  Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU or in millions of national currency. Balance of Payments data coverage varies according to the collection. Some collections refer only to Euro area or EU countries, while some others' coverage includes also EU partner countries.   Several statistical adjustments are applied to the original data provided by the Member States. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.    More information on BoP is available for each specific collection: Quarterly BoP, ITS, FDI, Outward FATS, BoP of EU Institutions.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services (ITS), a component of BoP current account, are used, alongside with data on Foreign Direct Investment (a component of BoP financial account), to monitor the external commercial performance of different economies. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports. Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU and in millions of national currency. Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.

The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections: Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States: a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups: general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

The Bertelsmann Stiftung’s Transformation Index (BTI) analyzes and evaluates the quality of democracy, a market economy and political management in 128 developing and transition countries. It measures successes and setbacks on the path toward a democracy based on the rule of law and a market economy flanked by sociopolitical safeguards. Within this framework, the BTI publishes two rankings, the Status Index and the Management Index.

UNCTAD's Bilateral FDI Statistics provides up-to-date and systematic FDI data for 206 economies around the world, covering inflows (table 1), outflows (table 2), inward stock (table 3) and outward stock (table 4) by region and economy. Data are in principle collected from national sources. In order to cover the entire world, where data are not available from national sources, data from partner countries (mirror data) as well as from other international organizations have also been used.

This data set provides a snapshot of migration and remittances for all countries, regions and income groups of the world, compiled from available data from various sources

Data given in this domain are collected annually by the National Statistical Institutes and are based on Eurostat's annual model questionnaires on ICT (Information and Communication Technologies) usage in households and by individuals. Large part of the data collected are used in the context of the 2011 - 2015 benchmarking framework (endorsed by i2010 High Level Group in November 2009) for the Digital Agenda Scoreboard, Europe's strategy for a flourishing digital economy by 2020. This conceptual framework follows the i2010 Benchmarking Framework which itself followed-up the eEurope 2005 Action Plan. ICT usage data are also used in the Consumer Conditions Scoreboard (purchases over the Internet) and in the Employment Guidelines (e-skills of individuals). The aim of the European ICT surveys is the timely provision of statistics on individuals and households on the use of Information and Communication Technologies at European level. Data for this collection are supplied directly from the surveys with no separate treatment. Coverage: The characteristics to be provided are drawn from the following list of subjects:access to and use of ICTs by individuals and/or in households,use of the Internet and other electronic networks for different purposes by individuals and/or in households,ICT security and trust,ICT competence and skills,barriers to the use of ICT and the Internet,perceived effects of ICT usage on individuals and/or on households,use of ICT by individuals to exchange information and services with governments and public administrations (e-government),access to and use of technologies enabling connection to the Internet or other networks from anywhere at any time (ubiquitous connectivity). Breakdowns (see details of available breakdowns): Relating to households:by region of residence (NUTS 1, optional: NUTS 2)by geographical location: less developed regions, transition regions, more developed regionsby degree of urbanisation (till 2012: densely/intermediate/sparsely populated areas; from 2012: densely/thinly populated area, intermediate density area) by type of householdby households net monthly income (optional) Relating to individuals:by region of residence (NUTS1, optional: NUTS 2)by geographical location: less developed regions, transition regions, more developed regionsby degree of urbanisation: (till 2012: densely/intermediate/sparsely populated areas; from 2012: densely/thinly populated area, intermediate density area)by genderby country of birth, country of citizenship (as of 2010, optional in 2010)by educational level: ISCED 1997 up to 2013 and ISCED 2011 from 2014 onwards.by occupation: manual, non-manual; ICT (coded by 2-digit ISCO categories)/non-ICT (optional: all 2-digit ISCO categories)by employment situationby age (in completed years and by groups)legal / de facto marital status (2011-2014, optional) Regional breakdowns (NUTS) are available only for a selection of indicators disseminated in the regional tables in Eurobase (Regional Information society statistics by NUTS regions (isoc_reg):Households with access to the internet at homeHouseholds with broadband accessIndividuals who have never used a computerIndividuals who used the internet, frequency of use and activitiesIndividuals who used the internet for interaction with public authoritiesIndividuals who ordered goods or services over the internet for private useIndividuals who accessed the internet away from home or work

Data given in this domain are collected annually by the National Statistical Institutes and are based on Eurostat's annual model questionnaires on ICT (Information and Communication Technologies) usage in households and by individuals. Large part of the data collected are used in the context of the 2011 - 2015 benchmarking framework (endorsed by i2010 High Level Group in November 2009) for the Digital Agenda Scoreboard, Europe's strategy for a flourishing digital economy by 2020. This conceptual framework follows the i2010 Benchmarking Framework which itself followed-up the eEurope 2005 Action Plan. ICT usage data are also used in the Consumer Conditions Scoreboard (purchases over the Internet) and in the Employment Guidelines (e-skills of individuals). The aim of the European ICT surveys is the timely provision of statistics on individuals and households on the use of Information and Communication Technologies at European level. Data for this collection are supplied directly from the surveys with no separate treatment. Coverage: The characteristics to be provided are drawn from the following list of subjects:access to and use of ICTs by individuals and/or in households,use of the Internet and other electronic networks for different purposes by individuals and/or in households,ICT security and trust,ICT competence and skills,barriers to the use of ICT and the Internet,perceived effects of ICT usage on individuals and/or on households,use of ICT by individuals to exchange information and services with governments and public administrations (e-government),access to and use of technologies enabling connection to the Internet or other networks from anywhere at any time (ubiquitous connectivity). Breakdowns (see details of available breakdowns): Relating to households:by region of residence (NUTS 1, optional: NUTS 2)by geographical location: less developed regions, transition regions, more developed regionsby degree of urbanisation (till 2012: densely/intermediate/sparsely populated areas; from 2012: densely/thinly populated area, intermediate density area) by type of householdby households net monthly income (optional) Relating to individuals:by region of residence (NUTS1, optional: NUTS 2)by geographical location: less developed regions, transition regions, more developed regionsby degree of urbanisation: (till 2012: densely/intermediate/sparsely populated areas; from 2012: densely/thinly populated area, intermediate density area)by genderby country of birth, country of citizenship (as of 2010, optional in 2010)by educational level: ISCED 1997 up to 2013 and ISCED 2011 from 2014 onwards.by occupation: manual, non-manual; ICT (coded by 2-digit ISCO categories)/non-ICT (optional: all 2-digit ISCO categories)by employment situationby age (in completed years and by groups)legal / de facto marital status (2011-2014, optional) Regional breakdowns (NUTS) are available only for a selection of indicators disseminated in the regional tables in Eurobase (Regional Information society statistics by NUTS regions (isoc_reg):Households with access to the internet at homeHouseholds with broadband accessIndividuals who have never used a computerIndividuals who used the internet, frequency of use and activitiesIndividuals who used the internet for interaction with public authoritiesIndividuals who ordered goods or services over the internet for private useIndividuals who accessed the internet away from home or work

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms: UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesCONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesSERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms: UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesCONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesSERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms: UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesCONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesSERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms: UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesCONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesSERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

This collection provides users with data concerning R&D expenditure and R&D personnel broken down by following institutional sectors: business enterprise (BES), government (GOV), higher education (HES), private non-profit (PNP) with the total of sectors. All data are broken down by the above mentioned sectors of performance. The R&D expenditure is further broken down by source of funds, by type of costs, by economic activity (NACE Rev.2), by size class, by type of R&D, by fields of science, by socio-economic objectives and by regions (NUTS 2 level). Besides R&D expenditures in basic unit National currency (MIO_NAC) the following units are available: Euro (MIO_EUR), Euro per inhabitant (EUR_HAB) Purchasing Power Standard (MIO_PPS), Purchasing Power Standard at 2005 prices (MIO_PPS_KP05), Purchasing Power Standard per inhabitant at constant 2005 prices (PPS_KP05_HAB), Percentage of GDP (PC_GDP) and Percentage of total R&D expenditure (PC_TOT - for the breakdown by source of funds). R&D personnel data is available in full-time equivalent (FTE), in head count (HC), as a % of employment and as a % of labour force. The data is further broken down by occupation, by qualification, by gender, by size class, by citizenship, by age groups, by fields of science, by economic activity (NACE Rev.2) and by regions (NUTS 2 level). The periodicity of R&D data is biennial except for the key R&D indicators (R&D expenditure, R&D personnel and Researchers by sectors of performance) which are transmitted annually by the EU Member States on the basis of a legal obligation from 2003 onwards. Some other breakdowns of the data may appear on annual basis based on voluntary data provisions. The data are collected through sample or census surveys, from administrative registers or through a combination of sources. R&D data are available for following countries and country groups: - All EU Member States, plus Candidate Countries, EFTA Countries, the Russian Federation, China, Japan, the United States and South Korea. - Country groups: EU-28, EU-15 and EA-18. R&D data are compiled in accordance to the guidelines laid down in the Proposed standard practice for surveys of research and experimental development - Frascati Manual (FM), OECD, 2002 .

This collection provides users with data concerning R&D expenditure and R&D personnel broken down by following institutional sectors: business enterprise (BES), government (GOV), higher education (HES), private non-profit (PNP) with the total of sectors. All data are broken down by the above mentioned sectors of performance. The R&D expenditure is further broken down by source of funds, by type of costs, by economic activity (NACE Rev.2), by size class, by type of R&D, by fields of science, by socio-economic objectives and by regions (NUTS 2 level). Besides R&D expenditures in basic unit National currency (MIO_NAC) the following units are available: Euro (MIO_EUR), Euro per inhabitant (EUR_HAB) Purchasing Power Standard (MIO_PPS), Purchasing Power Standard at 2005 prices (MIO_PPS_KP05), Purchasing Power Standard per inhabitant at constant 2005 prices (PPS_KP05_HAB), Percentage of GDP (PC_GDP) and Percentage of total R&D expenditure (PC_TOT - for the breakdown by source of funds). R&D personnel data is available in full-time equivalent (FTE), in head count (HC), as a % of employment and as a % of labour force. The data is further broken down by occupation, by qualification, by gender, by size class, by citizenship, by age groups, by fields of science, by economic activity (NACE Rev.2) and by regions (NUTS 2 level). The periodicity of R&D data is biennial except for the key R&D indicators (R&D expenditure, R&D personnel and Researchers by sectors of performance) which are transmitted annually by the EU Member States on the basis of a legal obligation from 2003 onwards. Some other breakdowns of the data may appear on annual basis based on voluntary data provisions. The data are collected through sample or census surveys, from administrative registers or through a combination of sources. R&D data are available for following countries and country groups: - All EU Member States, plus Candidate Countries, EFTA Countries, the Russian Federation, China, Japan, the United States and South Korea. - Country groups: EU-28, EU-15 and EA-18. R&D data are compiled in accordance to the guidelines laid down in the Proposed standard practice for surveys of research and experimental development - Frascati Manual (FM), OECD, 2002 .

This collection provides users with data concerning R&D expenditure and R&D personnel broken down by following institutional sectors: business enterprise (BES), government (GOV), higher education (HES), private non-profit (PNP) with the total of sectors. All data are broken down by the above mentioned sectors of performance. The R&D expenditure is further broken down by source of funds, by type of costs, by economic activity (NACE Rev.2), by size class, by type of R&D, by fields of science, by socio-economic objectives and by regions (NUTS 2 level). Besides R&D expenditures in basic unit National currency (MIO_NAC) the following units are available: Euro (MIO_EUR), Euro per inhabitant (EUR_HAB) Purchasing Power Standard (MIO_PPS), Purchasing Power Standard at 2005 prices (MIO_PPS_KP05), Purchasing Power Standard per inhabitant at constant 2005 prices (PPS_KP05_HAB), Percentage of GDP (PC_GDP) and Percentage of total R&D expenditure (PC_TOT - for the breakdown by source of funds). R&D personnel data is available in full-time equivalent (FTE), in head count (HC), as a % of employment and as a % of labour force. The data is further broken down by occupation, by qualification, by gender, by size class, by citizenship, by age groups, by fields of science, by economic activity (NACE Rev.2) and by regions (NUTS 2 level). The periodicity of R&D data is biennial except for the key R&D indicators (R&D expenditure, R&D personnel and Researchers by sectors of performance) which are transmitted annually by the EU Member States on the basis of a legal obligation from 2003 onwards. Some other breakdowns of the data may appear on annual basis based on voluntary data provisions. The data are collected through sample or census surveys, from administrative registers or through a combination of sources. R&D data are available for following countries and country groups: - All EU Member States, plus Candidate Countries, EFTA Countries, the Russian Federation, China, Japan, the United States and South Korea. - Country groups: EU-28, EU-15 and EA-18. R&D data are compiled in accordance to the guidelines laid down in the Proposed standard practice for surveys of research and experimental development - Frascati Manual (FM), OECD, 2002 .

This collection provides users with data concerning R&D expenditure and R&D personnel broken down by following institutional sectors: business enterprise (BES), government (GOV), higher education (HES), private non-profit (PNP) with the total of sectors. All data are broken down by the above mentioned sectors of performance. The R&D expenditure is further broken down by source of funds, by type of costs, by economic activity (NACE Rev.2), by size class, by type of R&D, by fields of science, by socio-economic objectives and by regions (NUTS 2 level). Besides R&D expenditures in basic unit National currency (MIO_NAC) the following units are available: Euro (MIO_EUR), Euro per inhabitant (EUR_HAB) Purchasing Power Standard (MIO_PPS), Purchasing Power Standard at 2005 prices (MIO_PPS_KP05), Purchasing Power Standard per inhabitant at constant 2005 prices (PPS_KP05_HAB), Percentage of GDP (PC_GDP) and Percentage of total R&D expenditure (PC_TOT - for the breakdown by source of funds). R&D personnel data is available in full-time equivalent (FTE), in head count (HC), as a % of employment and as a % of labour force. The data is further broken down by occupation, by qualification, by gender, by size class, by citizenship, by age groups, by fields of science, by economic activity (NACE Rev.2) and by regions (NUTS 2 level). The periodicity of R&D data is biennial except for the key R&D indicators (R&D expenditure, R&D personnel and Researchers by sectors of performance) which are transmitted annually by the EU Member States on the basis of a legal obligation from 2003 onwards. Some other breakdowns of the data may appear on annual basis based on voluntary data provisions. The data are collected through sample or census surveys, from administrative registers or through a combination of sources. R&D data are available for following countries and country groups: - All EU Member States, plus Candidate Countries, EFTA Countries, the Russian Federation, China, Japan, the United States and South Korea. - Country groups: EU-28, EU-15 and EA-18. R&D data are compiled in accordance to the guidelines laid down in the Proposed standard practice for surveys of research and experimental development - Frascati Manual (FM), OECD, 2002 .

'Statistics on high-tech industry and knowledge-intensive services' (sometimes referred to as simply 'high-tech statistics') comprise economic, employment and science, technology and innovation (STI) data describing manufacturing and services industries or products traded broken down by technological intensity. The domain uses various other domains and sources of  Eurostat's official statistics (CIS, COMEXT, HRST, LFS, PATENT, R&D and SBS) and its coverage is therefore dependent on these other primary sources. Two main approaches are used in the domain to identify technology-intensity: the sectoral approach and the product approach. A third approach is used for data on high-tech and biotechnology patents aggregated on the basis of the International Patent Classification (IPC) 8th edition (see summary table in Annex 1 for which approach is used by each type of data). The sectoral approach: The sectoral approach is an aggregation of the manufacturing industries according to technological intensity (R&D expenditure/value added) and based on the Statistical classification of economic activities in the European Community (NACE)  at 2-digit level. The level of R&D intensity served as a criterion of classification of economic sectors into high-technology, medium high-technology, medium low-technology and low-technology industries. Services are mainly aggregated into knowledge-intensive services (KIS) and less knowledge-intensive services (LKIS) based on the share of tertiary educated persons at NACE 2-digit level. The sectoral approach is used for all indicators except data on high-tech trade and patents. Note that due to the revision of the NACE from NACE Rev. 1.1 to NACE Rev. 2 the definition of high-technology industries and knowledge-intensive services has changed in 2008. For high-tech statistics it means that two different definitions (one according NACE Rev. 1.1 and one according NACE Rev. 2) are used in parallel and the data according to both NACE versions are presented in separated tables depending on the data availability. For example as the LFS provides the results both by NACE Rev. 1.1 and NACE Rev. 2, all the table using this source have been duplicated to present the results by NACE Rev. 2 from 2008. For more details, see both definitions of high-tech sectors under Annexes section. Within the sectoral approach, a second classification was created , named Knowledge Intensive Activities KIA) and based on the share of tertiary educated people in each sectors of industries and services according to NACE at 2-digit level and for all EU28 Member States. A threshold was applied to judge sectors as knowledge intensive. In contrast to first sectoral approach mixing two methodologies, one for manufacturing industries and one for services, the KIA classification is based on one methodology for all the sectors of industries and services covering even public sector activities. The aggregations in use are Total Knowledge Intensive Activities (KIA) and Knowledge Intensive Activities in Business Industries (KIABI). Both classifications are made according to NACE Rev. 1.1 and NACE Rev. 2 at 2- digit level. Note that due to revision of the NACE Rev.1.1 to NACE Rev. 2 the list of Knowledge Intensive Activities has changed as well, the two definitions are used in parallel and the data are shown in two separate tables. NACE Rev.2 collection includes data starting from 2008 reference year. For more details please see the definitions under Annexes section. The product approach: The product approach was created to complement the sectoral approach and it is used for data on high-tech trade. The product list is based on the calculations of R&D intensity by groups of products (R&D expenditure/total sales). The groups classified as high-technology products are aggregated on the basis of the Standard International Trade Classification (SITC). The initial definition was built based on SITC Rev.3 and served to compile the high-tech product aggregates until 2007. With the implementation in 2007 of the new version of SITC Rev.4, the definition of high-tech groups was revised and adapted according to new classification. Starting from 2007 the Eurostat presents the trade data for high-tech groups aggregated based on the SITC Rev.4. . For more details, see definition of high-tech products under Annexes section. High-tech patents: High-tech patentsare defined according to another approach. The groups classified as high-tech patents are aggregated on the basis of the International Patent Classification (IPC 8th edition). Biotechnology patents are also aggregated on the basis of the IPC 8th edition. For more details, see the aggregation list of high-tech and biotechnology patents under Annexes section. The high-tech domain also comprises the sub-domain Venture Capital Investments: data are provided by INVEST Europe (formerly named the European Private Equity and Venture Capital Association EVCA). More details are available in the Eurostat metadata under Venture capital investments. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

Eurostat Dataset Id:htec_sti_pers2 Data description'Statistics on high-tech industry and knowledge-intensive services' (sometimes referred to as simply 'high-tech statistics') comprise economic, employment and science, technology and innovation (STI) data describing manufacturing and services industries or products traded broken down by technological intensity. The domain uses various other domains and sources of Eurostat's official statistics (CIS, COMEXT, HRST, LFS, PATENT, R&D and SBS) and its coverage is therefore dependent on these other primary sources. Two main approaches are used in the domain to identify technology-intensity: the sectoral approach and the product approach. A third approach is used for data on high-tech and biotechnology patents aggregated on the basis of the International Patent Classification (IPC) 8th edition (see summary table in Annex 1 for which approach is used by each type of data).The sectoral approach:The sectoral approach is an aggregation of the manufacturing industries according to technological intensity (R&D expenditure/value added) and based on the Statistical classification of economic activities in the European Community (NACE) at 2-digit level. The level of R&D intensity served as a criterion of classification of economic sectors into high-technology, medium high-technology, medium low-technology and low-technology industries.Services are mainly aggregated into knowledge-intensive services (KIS) and less knowledge-intensive services (LKIS) based on the share of tertiary educated persons at NACE 2-digit level.The sectoral approach is used for all indicators except data on high-tech trade and patents.Note that due to the revision of the NACE from NACE Rev. 1.1 to NACE Rev. 2 the definition of high-technology industries and knowledge-intensive services has changed in 2008. For high-tech statistics it means that two different definitions (one according NACE Rev. 1.1 and one according NACE Rev. 2) are used in parallel and the data according to both NACE versions are presented in separated tables depending on the data availability. For example as the LFS provides the results both by NACE Rev. 1.1 and NACE Rev. 2, all the table using this source have been duplicated to present the results by NACE Rev. 2 from 2008. For more details, see both definitions of high-tech sectors under 21.3.Within the sectoral approach, a second classification was created , named Knowledge Intensive Activities KIA) and based on the share of tertiary educated people in each sectors of industries and services according to NACE at 2-digit level and for all EU28 Member States. A threshold was applied to judge sectors as knowledge intensive. In contrast to first sectoral approach mixing two methodologies, one for manufacturing industries and one for services, the KIA classification is based on one methodology for all the sectors of industries and services covering even public sector activities.The aggregations in use are Total Knowledge Intensive Activities (KIA) and Knowledge Intensive Activities in Business Industries (KIABI). Both classifications are made according to NACE Rev. 1.1 and NACE Rev. 2 at 2- digit level. Note that due to revision of the NACE Rev.1.1 to NACE Rev. 2 the list of Knowledge Intensive Activities has changed as well, the two definitions are used in parallel and the data are shown in two separate tables. NACE Rev.2 collection includes data starting from 2008 reference year. For more details please see the definitions under 21.3.The product approach:The product approach was created to complement the sectoral approach and it is used for data on high-tech trade. The product list is based on the calculations of R&D intensity by groups of products (R&D expenditure/total sales). The groups classified as high-technology products are aggregated on the basis of the Standard International Trade Classification (SITC).The initial definition was built based on SITC Rev.3 and served to compile the high-tech product aggregates until 2007. With the implementation in 2007 of the new version of SITC Rev.4, the definition of high-tech groups was revised and adapted according to new classification. Starting from 2007 the Eurostat presents the trade data for high-tech groups aggregated based on the SITC Rev.4. . For more details, see definition of high-tech products under 21.3.High-tech patents:High-tech patents are defined according to another approach. The groups classified as high-tech patents are aggregated on the basis of the International Patent Classification (IPC 8th edition).Biotechnology patents are also aggregated on the basis of the IPC 8th edition. For more details, see the aggregation list of high-tech and biotechnology patents under 21.3.The high-tech domain also comprises the sub-domain Venture Capital Investments: data are provided by the European Private Equity and Venture Capital Association (EVCA). More details are available in the Eurostat metadata under Venture capital investments.Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

CAIT Historic allows for easy access, analysis and visualization of the latest available international greenhouse gas emissions data. It includes information for 186 countries, 50 U.S. states, 6 gases, multiple economic sectors, and 160 years - carbon dioxide emissions for 1850-2012 and multi-sector greenhouse gas emission for 1990-2012.

Eurostat Dataset Id:cpc_agmain  The focus of this domain is on the following country groups:Acceeding country: Croatia (HR)Candidate countries: the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)Potential candidate countries: Albania (AL), Bosnia and Herzegovina (BA), as well as Kosovo under UNSCR 1244/99 (XK)

The focus of this domain is on enlargement countries, in other words the following country groups: candidate countries — Albania (AL), the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)potential candidates — Bosnia and Herzegovina (BA), as well as Kosovo (XK) (*) An extensive range of indicators is presented in this domain, including indicators from almost every theme covered by European statistics. Only annual data are published in this domain. (*) This designation is without prejudice to positions on status and is in line with UNSCR 1244 and the ICJ Opinion on the Kosovo declaration of independence.

Eurostat Dataset Id:cpc_ecnacoi  The focus of this domain is on the following country groups:Acceeding country: Croatia (HR)Candidate countries: the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)Potential candidate countries: Albania (AL), Bosnia and Herzegovina (BA), as well as Kosovo under UNSCR 1244/99 (XK)

Eurostat Dataset Id:cpc_ecbop  The focus of this domain is on the following country groups:Acceeding country: Croatia (HR)Candidate countries: the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)Potential candidate countries: Albania (AL), Bosnia and Herzegovina (BA), as well as Kosovo under UNSCR 1244/99 (XK)

Eurostat Dataset Id:cpc_enclimwa  The focus of this domain is on the following country groups:Acceeding country: Croatia (HR)Candidate countries: the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)Potential candidate countries: Albania (AL), Bosnia and Herzegovina (BA), as well as Kosovo under UNSCR 1244/99 (XK)

The focus of this domain is on enlargement countries, in other words the following country groups: candidate countries — Albania (AL), the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)potential candidates — Bosnia and Herzegovina (BA), as well as Kosovo (XK) (*) An extensive range of indicators is presented in this domain, including indicators from almost every theme covered by European statistics. Only annual data are published in this domain. (*) This designation is without prejudice to positions on status and is in line with UNSCR 1244 and the ICJ Opinion on the Kosovo declaration of independence.

Eurostat Dataset Id:cpc_energy  The focus of this domain is on the following country groups:Acceeding country: Croatia (HR)Candidate countries: the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)Potential candidate countries: Albania (AL), Bosnia and Herzegovina (BA), as well as Kosovo under UNSCR 1244/99 (XK)

Eurostat Dataset Id:cpc_ecexint  The focus of this domain is on the following country groups:Acceeding country: Croatia (HR)Candidate countries: the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)Potential candidate countries: Albania (AL), Bosnia and Herzegovina (BA), as well as Kosovo under UNSCR 1244/99 (XK)

Eurostat Dataset Id:cpc_agfish  The focus of this domain is on the following country groups:Acceeding country: Croatia (HR)Candidate countries: the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)Potential candidate countries: Albania (AL), Bosnia and Herzegovina (BA), as well as Kosovo under UNSCR 1244/99 (XK)

Eurostat Dataset Id:cpc_agfor  The focus of this domain is on the following country groups:Acceeding country: Croatia (HR)Candidate countries: the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)Potential candidate countries: Albania (AL), Bosnia and Herzegovina (BA), as well as Kosovo under UNSCR 1244/99 (XK)

Eurostat Dataset Id:cpc_ecnagdp  The focus of this domain is on the following country groups:Acceeding country: Croatia (HR)Candidate countries: the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)Potential candidate countries: Albania (AL), Bosnia and Herzegovina (BA), as well as Kosovo under UNSCR 1244/99 (XK)

Eurostat Dataset Id:cpc_ecgov  The focus of this domain is on the following country groups:Acceeding country: Croatia (HR)Candidate countries: the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)Potential candidate countries: Albania (AL), Bosnia and Herzegovina (BA), as well as Kosovo under UNSCR 1244/99 (XK)

Eurostat Dataset Id:cpc_inisoc  The focus of this domain is on the following country groups:Acceeding country: Croatia (HR)Candidate countries: the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)Potential candidate countries: Albania (AL), Bosnia and Herzegovina (BA), as well as Kosovo under UNSCR 1244/99 (XK)

Eurostat Dataset Id:cpc_etmain  The focus of this domain is on the following country groups:Acceeding country: Croatia (HR)Candidate countries: the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)Potential candidate countries: Albania (AL), Bosnia and Herzegovina (BA), as well as Kosovo under UNSCR 1244/99 (XK)

The focus of this domain is on enlargement countries, in other words the following country groups: candidate countries — Albania (AL), the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)potential candidates — Bosnia and Herzegovina (BA), as well as Kosovo (XK) (*) An extensive range of indicators is presented in this domain, including indicators from almost every theme covered by European statistics. Only annual data are published in this domain. (*) This designation is without prejudice to positions on status and is in line with UNSCR 1244 and the ICJ Opinion on the Kosovo declaration of independence.

Eurostat Dataset Id:cpc_psilc  The focus of this domain is on the following country groups:Acceeding country: Croatia (HR)Candidate countries: the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)Potential candidate countries: Albania (AL), Bosnia and Herzegovina (BA), as well as Kosovo under UNSCR 1244/99 (XK)

The focus of this domain is on enlargement countries, in other words the following country groups: candidate countries — Albania (AL), the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)potential candidates — Bosnia and Herzegovina (BA), as well as Kosovo (XK) (*) An extensive range of indicators is presented in this domain, including indicators from almost every theme covered by European statistics. Only annual data are published in this domain. (*) This designation is without prejudice to positions on status and is in line with UNSCR 1244 and the ICJ Opinion on the Kosovo declaration of independence.

Eurostat Dataset Id:cpc_psdemo  The focus of this domain is on the following country groups:Acceeding country: Croatia (HR)Candidate countries: the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)Potential candidate countries: Albania (AL), Bosnia and Herzegovina (BA), as well as Kosovo under UNSCR 1244/99 (XK)

The focus of this domain is on enlargement countries, in other words the following country groups: candidate countries — Albania (AL), the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)potential candidates — Bosnia and Herzegovina (BA), as well as Kosovo (XK) (*) An extensive range of indicators is presented in this domain, including indicators from almost every theme covered by European statistics. Only annual data are published in this domain. (*) This designation is without prejudice to positions on status and is in line with UNSCR 1244 and the ICJ Opinion on the Kosovo declaration of independence.

Eurostat Dataset Id:cpc_scienc  The focus of this domain is on the following country groups:Acceeding country: Croatia (HR)Candidate countries: the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)Potential candidate countries: Albania (AL), Bosnia and Herzegovina (BA), as well as Kosovo under UNSCR 1244/99 (XK)

The focus of this domain is on enlargement countries, in other words the following country groups: candidate countries — Albania (AL), the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)potential candidates — Bosnia and Herzegovina (BA), as well as Kosovo (XK) (*) An extensive range of indicators is presented in this domain, including indicators from almost every theme covered by European statistics. Only annual data are published in this domain. (*) This designation is without prejudice to positions on status and is in line with UNSCR 1244 and the ICJ Opinion on the Kosovo declaration of independence.

Eurostat Dataset Id:cpc_siecr  The focus of this domain is on the following country groups:Acceeding country: Croatia (HR)Candidate countries: the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)Potential candidate countries: Albania (AL), Bosnia and Herzegovina (BA), as well as Kosovo under UNSCR 1244/99 (XK)

Eurostat Dataset Id:cpc_siemp  The focus of this domain is on the following country groups:Acceeding country: Croatia (HR)Candidate countries: the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)Potential candidate countries: Albania (AL), Bosnia and Herzegovina (BA), as well as Kosovo under UNSCR 1244/99 (XK)

Eurostat Dataset Id:cpc_sienv  The focus of this domain is on the following country groups:Acceeding country: Croatia (HR)Candidate countries: the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)Potential candidate countries: Albania (AL), Bosnia and Herzegovina (BA), as well as Kosovo under UNSCR 1244/99 (XK)

Eurostat Dataset Id:cpc_sigeb  The focus of this domain is on the following country groups:Acceeding country: Croatia (HR)Candidate countries: the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)Potential candidate countries: Albania (AL), Bosnia and Herzegovina (BA), as well as Kosovo under UNSCR 1244/99 (XK)

Eurostat Dataset Id:cpc_siinr  The focus of this domain is on the following country groups:Acceeding country: Croatia (HR)Candidate countries: the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)Potential candidate countries: Albania (AL), Bosnia and Herzegovina (BA), as well as Kosovo under UNSCR 1244/99 (XK)

Eurostat Dataset Id:cpc_sisoc  The focus of this domain is on the following country groups:Acceeding country: Croatia (HR)Candidate countries: the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)Potential candidate countries: Albania (AL), Bosnia and Herzegovina (BA), as well as Kosovo under UNSCR 1244/99 (XK)

Eurostat Dataset Id:cpc_ettot  The focus of this domain is on the following country groups:Acceeding country: Croatia (HR)Candidate countries: the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)Potential candidate countries: Albania (AL), Bosnia and Herzegovina (BA), as well as Kosovo under UNSCR 1244/99 (XK)

Eurostat Dataset Id:cpc_intour  The focus of this domain is on the following country groups:Acceeding country: Croatia (HR)Candidate countries: the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)Potential candidate countries: Albania (AL), Bosnia and Herzegovina (BA), as well as Kosovo under UNSCR 1244/99 (XK)

Eurostat Dataset Id:cpc_etsitc  The focus of this domain is on the following country groups:Acceeding country: Croatia (HR)Candidate countries: the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)Potential candidate countries: Albania (AL), Bosnia and Herzegovina (BA), as well as Kosovo under UNSCR 1244/99 (XK)

The focus of this domain is on enlargement countries, in other words the following country groups: candidate countries — Albania (AL), the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)potential candidates — Bosnia and Herzegovina (BA), as well as Kosovo (XK) (*) An extensive range of indicators is presented in this domain, including indicators from almost every theme covered by European statistics. Only annual data are published in this domain. (*) This designation is without prejudice to positions on status and is in line with UNSCR 1244 and the ICJ Opinion on the Kosovo declaration of independence.

The focus of this domain is on enlargement countries, in other words the following country groups: candidate countries — Albania (AL), the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)potential candidates — Bosnia and Herzegovina (BA), as well as Kosovo (XK) (*) An extensive range of indicators is presented in this domain, including indicators from almost every theme covered by European statistics. Only annual data are published in this domain. (*) This designation is without prejudice to positions on status and is in line with UNSCR 1244 and the ICJ Opinion on the Kosovo declaration of independence.

The focus of this domain is on enlargement countries, in other words the following country groups: candidate countries — Albania (AL), the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)potential candidates — Bosnia and Herzegovina (BA), as well as Kosovo (XK) (*) An extensive range of indicators is presented in this domain, including indicators from almost every theme covered by European statistics. Only annual data are published in this domain. (*) This designation is without prejudice to positions on status and is in line with UNSCR 1244 and the ICJ Opinion on the Kosovo declaration of independence.

Catches of fish, crustaceans, molluscs and other aquatic organisms by species and fishing area for EU and associated countries (in live weight equivalent of the landings).

Catches of fish, crustaceans, molluscs and other aquatic organisms by species and fishing area for EU and associated countries (in live weight equivalent of the landings).

Eurostat Dataset Id:fish_ca_00 Catches of fish, crustaceans, molluscs and other aquatic organisms by species and fishing area for EU and associated countries (in live weight equivalent of the landings). The concepts and definitions used in the compilation of catch statistics are those laid down by the Coordinating Working Party on Fishery Statistics (CWP), of which Eurostat is one of the member organizations. These concepts and definitions have been in force since the late 1950's and are applied uniformly worldwide by the CWP and by the national authorities reporting to its member organizations. Therefore, though the quality of the data varies from country to country (being in many cases a function of the general characteristics of the national fishing industry), there is a high degree of comparability between countries and over time.  Nominal catch  The data refer to the catch of freshwater, brackish water and marine species of fish, crustaceans, molluscs and other aquatic animals and plants, killed, caught, trapped or collected for all commercial, industrial, recreational and subsistence purposes. In view of the importance of recreational fishing regarding some stocks and for certain countries, as well as the difficulty of distinguishing between recreational and subsistence fishing, the data should include the catches from recreational fisheries as well. However, it is recognised that certain countries are unable to supply the data for recreational fisheries. The catches are expressed in the live weight equivalent of the landings. As such they exclude all quantities caught but not landed (for example: discarded fish, fish consumed on board). The unit used is generally the metric ton. Data for marine mammals (e.g. whales) and certain other animals (e.g. crocodiles) are expressed in the number caught. The nominal catch data are normally derived from the landed quantities of the fishery products. For this purpose, the landed weight is converted to the live weight equivalent (nominal catch) by the application of factors. Species: All species for which catches are reported to international organizations are included in the Eurostat's database. They are identified by the internationally assigned three letter identifier (e.g. COD = Atlantic cod, PLE = European plaice) according to the FAO ASFIS (Aquatic Sciences and Fishery Information System) list of Species for Fishery Statistics Purposes. Fishing areas/regions: The catches are sub-divided by the area in which they occur. The methodologies vary from country to country depending on the nature of their fishing industries. Basic documentation used in collecting the data from EU fisheries are fishing log-books, landings declarations and sales notes used in the management of catch quota and market management systems within the Common Fisheries Policy. The methodologies used by EEA member countries have been described in the Eurostat publication "Fisheries: The collection and compilation of fish catch and landing statistics in member countries of the European Economic Area". Those used by the New Member States are described in a working document "Fisheries: The collection and compilation of fishery statistics in European Union Candidate Countries"

Animal production statistics cover three main sub-domains based on three pieces of relevant legislation and related gentlemen’s agreements. Livestock and meat statistics are collected under Regulation (EC) No 1165/2008. They cover meat production, as activity of slaughterhouses (monthly) and as other slaughtering (annual), meat production (gross indigenous production) forecast (semi-annual or quarterly), livestock statistics, including regional statistics. A quality report is also collected every third year.Milk and milk product statistics are collected under Decision 97/80/EC implementing Directive 96/16/EC. They cover farm production and utilisation of milk (annual), collection (monthly for cows’ milk) and production activity by dairies (annual) and statistics on the structure of dairies (every third year). An annual methodological report is also collected.Statistics on eggs for hatching and farmyard poultry chicks are collected under Regulation (EC) No 617/2008, implementing Regulation (EC) No 1234/2007 (Single CMO Regulation). They cover statistics on the structure (annual) and the activity (monthly) of hatcheries as well as reports on the external trade of chicks. European Economic Area countries (EEA, Iceland, Liechtenstein and Norway) are requested to provide milk statistics, with the exception of those related to home consumption, as stated in Annex XXI of the EEA Agreement. As Iceland is now a candidate country and Liechtenstein is exempted in the Agreement, only Norway is concerned. The Agreement between the European Community and the Swiss Confederation on cooperation in the field of statistics states that Switzerland must provide Eurostat with national milk statistics. It has been amended in 2013 for covering also some livestock and meat statistics. The same statistics are requested from the candidate countries as acquis communautaire. Further data about the same topics refer to repealed legal acts or agreements. The tables on animal product supply balance sheets (apro_mk_bal, apro_mt_bal and apro_ec_bal), statistics on the structure of rearing (apro_mt_str) and the number of laying hens (apro_ec_lshen) are therefore no longer updated. The same applies to some variables (external trade of animals and meat), periods (surveys in April or August) or items (number of horses) included in other tables. The statistical tables disseminated by Eurostat are organised into three groups of tables on Agricultural products (apro), i.e. Milk and milk products (apro_mk), Livestock and meat (apro_mt) and Poultry farming (apro_ec). This last label covers statistics on hatcheries and on trade in chicks. The regional animal production statistics collected on livestock (agr_r_animal) and on cows’ milk production on farms (agr_r_milk_pr) are disseminated separately. Due to the change in the legal basis or in the methodology, the time series may be broken. This is indicated by a flag in the tables. The detailed content of each table and the reference to its legal definition is provided in the table below. Table 3.1: Data tables disseminated regarding animal production statistics

The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections:Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States:a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups:general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections:Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States:a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups:general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections:Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States:a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups:general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

Chemistry facts and figures 2015: Foreign Trade

These metadata refer to the annual population data under Population / Demography domain in Eurostat's Dissemination data tree. Eurostat carries on annual demography data collections with the aim of collecting from the National Statistical Institutes detailed data on population, vital events, marriages and divorces. These data are validated, processed and disseminated. Further on, Eurostat uses the collected detailed data to compute and disseminate demographic indicators at country level, at regional level and at EU level, by applying harmonized methods of calculation. The demography data collections are done on voluntary basis and the completeness of information depends on the availability of data reported by the National Statistical Institutes. The first demography data collection of each year, named Rapid, is carried out in April-May (deadline 15 May). Within this data collection the first results on the main demographic developments in the previous year (T-1) and the population on 1st January of the current year (T) are collected from the National Statistical Institutes. A second annual data collection, Joint Demography data collection, is carried out in cooperation with United Nation Statistical Division (UNSD) in the summer of each year, having the deadline 15 September. Within this data collection Eurostat collects from the National Statistical Institutes detailed data on the demographic events (births, deaths, marriages and divorces) of the previous year (T-1) and the population on 1st January of the current year (T), broken down by sex, age and other characteristics. The Nowcast Demography data collection is carried out in October-November (deadline 15 November). The monthly time series on births, deaths, immigrants and emigrants available from the beginning of current year (T) are collected, with the purpose of producing by the end of the current year (T) a forecast on 1st January population of the following year (T+1). The Regional Demography data collection is carried out in November-December (deadline 15 December). It is based on the regional breakdown of the countries agreed at EU level using the latest version of the Nomenclature of Territorial Units for Statistics (NUTS) and of the Statistical regions for the EFTA and Candidate countries. Within this data collection Eurostat collects from the National Statistical Institutes data by NUTS level 1, 2 and 3 for the vital events taking place in the previous year (T-1) and the population figures on 1st January of the current year (T). Any updates sent by the National Statistical Institutes in-between data collections are validated, processed and disseminated in Eurostat's online database as soon as possible. The European aggregates and the demographic indicators are updated accordingly. Please note:The tables presenting population on 1 January figures by various breakdowns may display variations in the total population for some countries at a given moment in time. This may occur due to one of the following reasons: - The timing of the transmission to Eurostat of the population data for various breakdown may lead to different population on 1 January figures displayed in different population tables at a given moment in time. - The transmission to Eurostat of the post-census population revisions (following the 2011 population Censuses) is expected to be done by the national statistical offices gradually for the population breakdowns. The time series of populations between the previous census taking place in the country and 2011 will be revised by end 2013 by some of the countries, taking into account Eurostat’s recommendation. The following countries have transmitted to Eurostat post-2011 Census population revisions, broken down by age and sex, by autumn of 2013, which are reflected in the tables ‘Demographic balance and crude rates (demo_gind)’, ‘Population on 1 January by age and sex (demo_pjan)’, ‘Population on 1 January by five years age groups and sex (demo_pjangroup)’ and ‘Population on 1 January by broad age group and sex (demo_pjanbroad)’: BG 2007-2011; CZ 2001-2011; EE 2000-2011; IE 2007-2011; EL 2011; ES 2002-2011; HR 2001-2011; CY 2003-2011; LV 2001-2011; LT 2001-2011; MT 2006-2011; AT 2008-2011; PT 1992-2011; RO 2002-2011; SK 2002-2011; UK 2002-2011 (not including post-2011 Census data for Scotland); ME 2010-2011; RS 2011. As regards the the population data for the year 2012 and after, for most of the countries these take into account the results of the latest population census (held in 2011). IT 2012-2013 and DE 2012-2013 reported only the total post-2011 Census populations which are published in the table ‘Demographic balance and crude rates (demo_gind)’. The breakdown by age and sex will follow later on. - The succession of the annual demography data collections described above, which collect and update population breakdowns at different moment during the calendar year. - The calendar of the national statistical offices for producing and releasing population broken down by various topics, respectively the timings when data are transmitted to Eurostat. The most updated data on total population on 1st January and on the total number of live births and deaths may be found in the table 'Demographic balance and crude rates (demo_gind)' of the online 'Database by theme'. This table includes the latest updates (or revised data) on total population, births and deaths reported by the countries, while the detailed breakdowns by various characteristics included in the rest of the tables of the Demography domain (and also for Population by citizenship and by country of birth) may be transmitted to Eurostat at a subsequent date.

Data covers cow's milk collected in farms by approved dairies. A distinction should be made between "milk collected by dairies" and "milk production on the farm". Milk collection is only a part of the total use of milk production on the farm. The other part of the use of milk produced on the farm generally includes domestic consumption, direct sale and cattle feed.

The United Nations Commodity Trade Statistics Database (UN Comtrade) stores more than 1 billion trade data records from 1962. Over 140 reporter countries provide the United Nations Statistics Division with their annual international trade statistics detailed by commodities and partner countries. These data are subsequently transformed into the United Nations Statistics Division standard format with consistent coding and valuation using the UN/OECD CoprA internal processing system.

The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections: Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States: a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups: general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections: Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States: a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups: general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections: Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States: a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups: general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

Purchasing power parities (PPPs) are indicators of price level differences across countries. PPPs tell us how many currency units a given quantity of goods and services costs in different countries. PPPs can thus be used as currency conversion rates to convert expenditures expressed in national currencies into an artificial common currency (the Purchasing Power Standard, PPS), eliminating the effect of price level differences across countries. The main use of PPPs is to convert national accounts aggregates, like the Gross Domestic Product (GDP) of different countries, into comparable volume aggregates. Applying nominal exchange rates in this process would overestimate the GDP of countries with high price levels relative to countries with low price levels. The use of PPPs ensures that the GDP of all countries is valued at a uniform price level and thus reflects only differences in the actual volume of the economy. PPPs are also applied in analyses of relative price levels across countries. For this purpose, the PPPs are divided by the current nominal exchange rate to obtain a price level index (PLI) which expresses the price level of a given country relative to another, or relative to a group of countries like the EU28. The production of PPPs is a multilateral exercise involving the National Statistical Institutes of the participating countries, Eurostat and the OECD. Indicators in Eurostat's dissemination database The indicators published in the price domain on Eurostat's website are the following: Purchasing power parities (PPPs) scaled to the sum of expenditures of the EU Member States expressed in euro. This means that the PPP of one particular country indicates how many units of national currency one would need in that country in order to maintain the purchasing power of one euro in the EUPrice level indices (PLIs) as defined aboveNominal expenditure in national currency, as extracted from each country's national accountsNominal expenditure as percentage of GDPNominal expenditure in euroNominal expenditure per inhabitant in euroReal expenditure, defined as nominal expenditure divided by the PPPReal expenditure per inhabitantVolume indices of real expenditure per inhabitantThe price convergence indicator, defined as the coefficient of variation of the PLIs of household final consumption expenditure (HFCE). It provides an estimate of the price convergence within a group of countries. For example, if the price convergence indicator for EU28 decreases over time, the national price levels in the Member States are converging. In addition, PPPs and real expenditures are available from the national accounts domain of the database. For further details, cf. 17.1.

Annual data on quantities for crude oil, oil products, natural gas and manufactures gases, electricity and derived heat, solid fossil fuels,  renewables and wastes covering the full spectrum of the energy sector from supply through transformation to final energy consumption by sector and fuel type. Also, annual imports and exports data of various energy carriers by country of origin and destination, as well as infrastructure information. Annual data collection cover in principle the EU Member States, EFTA, EU candidate countries, and potential candidate countries. Time series starts mostly in year 1990. All data are presented in the form of energy balances.

This table provides information on number of exported/imported products, concentration and diversification indices by country. The concentration index shows how exports and imports of individual countries or group of countries are concentrated on several products or otherwise distributed in a more homogeneous manner among a series of products. The diversification index signals whether the structure of exports or imports by product of a given country or group of countries differ from the structure of product of the world.

Industry, Trade and Services statistics are part of Short-term statistics (STS), they give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification(Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are presented in the following forms: UnadjustedCalendar adjustedSeasonally-adjusted Depending on the STS regulation, data are accessible monthly and quarterly. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction Index*Turnover IndexProducer Prices (Domestic Output Prices index)*Import Prices Index*: Total, Euro area market, Non euro area market (euro area countries only)Labour Input Indicators: Number of Persons Employed, Hours Worked, Gross Wages and SalariesCONSTRUCTIONProduction Index*: Total of the construction sector, Building construction, Civil EngineeringLabour input indicators: Number of Persons Employed, Hours Worked, Gross Wages and SalariesConstruction costs IndexBuilding permits indicators*: Number of dwellingsWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (in value)Labour input indicators: Number of Persons EmployedSERVICES  Turnover Index* Producer prices (Ouput prices)*

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms: UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesCONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesSERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms: UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesCONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesSERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms: UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesCONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesSERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms: UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesCONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesSERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

The objective of the construction cost index is to show the development of costs incurred by the contractor/producer to carry out the construction process, in others words the cost of labour, materials and plant and overheads. The construction sector corresponds to the NACE Rev. 2 section F but the split between building construction and civil engineering (CC1, CC2) is based on the Classification of types of Construction. Building construction (CC1) is further subdivided in residential building (CC11) and non-residential building (CC12). The data provided in this table concerns residential building excluding the subgroup of residencies for communities (CC11 excluding CC113). Data are not seasonally adjusted.

The CDIS database presents detailed data on "inward" direct investment positions (i.e. direct investment into the reporting economy) cross-classified by economy of immediate investor and data on "outward" direct investment positions (i.e. direct investment abroad by the reporting economy) cross-classified by economy of immediate investment. The CDIS database contains breakdowns of direct investment position data including in most instances separate data on net equity and net debt positions as well as tables that present "mirror" data (i.e. tables in which data from the reporting economy are shown side-by-side with the data obtained from all other counterpart reporting economies).

Transparency International(TI) defines corruption as the abuse of entrusted power for private gain. This definition encompasses corrupt practices in both the public and private sectors. The Corruption Perceptions Index (CPI) ranks countries according to the perception of corruption in the public sector. The CPI is an aggregate indicator that combines different sources of information about corruption, making it possible to compare countries. The CPI ranks almost 200 countries by their perceived levels of corruption, as determined by expert assessments and opinion surveys.

Note: For latest Average Annual wages from OECD, Please visit Average annual wages   Cost of Living Index (from Numbeo): Indexes on this website are relative to New York City (NYC). Which means that for New York City, each index should be 100(%). If another city has, for example, rent index of 120, it means rents in average in that city are 20% more expensive than in New York City. If a city has rent index of 70, that means in the average in that city rents are 30% less expensive than in New York City.   Average Annual wages (from OECD)  Data on average annual wages per full-time and full-year equivalent employee in the total economy.  The data, from 1990 to 2010) are available in :2011 USD exchange rates and 2011 constant pricesin 2011 constant prices and NCUin 2011 USD PPPs and 2011 constant pricesin 2011 USD exchange rates and 2011

Global growth is forecast at 3.5 percent in 2015 and 3.8 percent in 2016, with uneven prospects across the main countries and regions of the world. The distribution of risks to near-term global growth has become more balanced relative to the October World Economic Outlook but is still tilted to the downside. The decline in oil prices could boost activity more than expected. Geopolitical tensions continue to pose threats, and risks of disruptive shifts in asset prices remain relevant. In some advanced economies, protracted low inflation or deflation also pose risks to activity. The chapter takes a region-by-region look at the recent development in the world economy and the outlook for 2015, with particular attention to notable development in countries within each region.

Country Programmable Aid (CPA), outlined in our Development Brief  and also known as “core” aid, is the portion of aid donors programme for individual countries, and over which partner countries could have a significant say. CPA is much closer than ODA to capturing the flows of aid that goes to the partner country, and has been proven in several studies to be a good proxy of aid recorded at country level. CPA was developed in 2007 in close collaboration with DAC members. It is derived on the basis of DAC statistics and was retroactively calculated from 2000 onwards

Country Programmable Aid (CPA), outlined in our Development Brief  and also known as “core” aid, is the portion of aid donors programme for individual countries, and over which partner countries could have a significant say. CPA is much closer than ODA to capturing the flows of aid that goes to the partner country, and has been proven in several studies to be a good proxy of aid recorded at country level. CPA was developed in 2007 in close collaboration with DAC members. It is derived on the basis of DAC statistics and was retroactively calculated from 2000 onwards

Animal production statistics cover three main sub-domains based on three pieces of relevant legislation and related gentlemen’s agreements.Livestock and meat statistics are collected under Regulation (EC) No 1165/2008. They cover meat production, as activity of slaughterhouses (monthly) and as other slaughtering (annual), meat production (gross indigenous production) forecast (semi-annual or quarterly), livestock statistics, including regional statistics. A quality report is also collected every third year.Milk and milk product statistics are collected under Decision 97/80/EC implementing Directive 96/16/EC. They cover farm production and utilisation of milk (annual), collection (monthly for cows’ milk) and production activity by dairies (annual) and statistics on the structure of dairies (every third year). An annual methodological report is also collected.Statistics on eggs for hatching and farmyard poultry chicks are collected under Regulation (EC) No 617/2008, implementing Regulation (EC) No 1234/2007 (Single CMO Regulation). They cover statistics on the structure (annual) and the activity (monthly) of hatcheries as well as reports on the external trade of chicks. European Economic Area countries (EEA, Iceland, Liechtenstein and Norway) are requested to provide milk statistics, with the exception of those related to home consumption, as stated in Annex XXI of the EEA Agreement. As Iceland is now a candidate country and Liechtenstein is exempted in the Agreement, only Norway is concerned. The Agreement between the European Community and the Swiss Confederation on cooperation in the field of statistics states that Switzerland must provide Eurostat with national milk statistics. It has been amended in 2013 for covering also some livestock and meat statistics. The same statistics are requested from the candidate countries as acquis communautaire. Further data about the same topics refer to repealed legal acts or agreements. The tables on animal product supply balance sheets (apro_mk_bal, apro_mt_bal and apro_ec_bal), statistics on the structure of rearing (apro_mt_str) and the number of laying hens (apro_ec_lshen) are therefore no longer updated. The same applies to some variables (external trade of animals and meat), periods (surveys in April or August) or items (number of horses) included in other tables. The statistical tables disseminated by Eurostat are organised into three groups of tables on Agricultural products (apro), i.e. Milk and milk products (apro_mk), Livestock and meat (apro_mt) and Poultry farming (apro_ec). This last label covers statistics on hatcheries and on trade in chicks. The regional animal production statistics collected on livestock (agr_r_animal) and on cows’ milk production on farms (agr_r_milk_pr) are disseminated separately. Due to the change in the legal basis or in the methodology, the time series may be broken. This is indicated by a flag in the tables. The detailed content of each table and the reference to its legal definition is provided in the table below. Table 3.1: Data tables disseminated regarding animal production statistics <

Animal production statistics cover three main sub-domains based on three pieces of relevant legislation and related gentlemen’s agreements.Livestock and meat statistics are collected under Regulation (EC) No 1165/2008. They cover meat production, as activity of slaughterhouses (monthly) and as other slaughtering (annual), meat production (gross indigenous production) forecast (semi-annual or quarterly), livestock statistics, including regional statistics. A quality report is also collected every third year.Milk and milk product statistics are collected under Decision 97/80/EC implementing Directive 96/16/EC. They cover farm production and utilisation of milk (annual), collection (monthly for cows’ milk) and production activity by dairies (annual) and statistics on the structure of dairies (every third year). An annual methodological report is also collected.Statistics on eggs for hatching and farmyard poultry chicks are collected under Regulation (EC) No 617/2008, implementing Regulation (EC) No 1234/2007 (Single CMO Regulation). They cover statistics on the structure (annual) and the activity (monthly) of hatcheries as well as reports on the external trade of chicks. European Economic Area countries (EEA, Iceland, Liechtenstein and Norway) are requested to provide milk statistics, with the exception of those related to home consumption, as stated in Annex XXI of the EEA Agreement. As Iceland is now a candidate country and Liechtenstein is exempted in the Agreement, only Norway is concerned. The Agreement between the European Community and the Swiss Confederation on cooperation in the field of statistics states that Switzerland must provide Eurostat with national milk statistics. It has been amended in 2013 for covering also some livestock and meat statistics. The same statistics are requested from the candidate countries as acquis communautaire. Further data about the same topics refer to repealed legal acts or agreements. The tables on animal product supply balance sheets (apro_mk_bal, apro_mt_bal and apro_ec_bal), statistics on the structure of rearing (apro_mt_str) and the number of laying hens (apro_ec_lshen) are therefore no longer updated. The same applies to some variables (external trade of animals and meat), periods (surveys in April or August) or items (number of horses) included in other tables. The statistical tables disseminated by Eurostat are organised into three groups of tables on Agricultural products (apro), i.e. Milk and milk products (apro_mk), Livestock and meat (apro_mt) and Poultry farming (apro_ec). This last label covers statistics on hatcheries and on trade in chicks. The regional animal production statistics collected on livestock (agr_r_animal) and on cows’ milk production on farms (agr_r_milk_pr) are disseminated separately. Due to the change in the legal basis or in the methodology, the time series may be broken. This is indicated by a flag in the tables. The detailed content of each table and the reference to its legal definition is provided in the table below. Table 3.1: Data tables disseminated regarding animal production statistics <

The objective of the CRS Aid Activity database is to provide a set of readily available basic data that enables analysis on where aid goes, what purposes it serves and what policies it aims to implement, on a comparable basis for all DAC members. Data are collected on individual projects and programmes. Focus is on financial data but some descriptive information is also made available.

Annual data on crime and criminal justice are now collected through the joint Eurostat-UNODC data collection and data for 2008 onwards are available in the following Eurobase data sets: crim_off_cat, crim_hom,crim_just, crim_crt and crim_pris.  The data in Eurobase data set crim_h relate to national data on crime up to 2007 (offences recorded by the police - total crime, homicide, violent crime, robbery, domestic burglary, theft of a motor vehicle, drug trafficking), the number of police officers and the prison population are available at country level for European Union Member States, EFTA countries, EU Candidate countries, and EU Potential Candidates. Data on homicide is also available by capital cities (police areas) in these countries. The data in crim_h were collected from EU Member States using a different Eurostat questionnaire and different definitions. As a result the figures are not directly comparable with the national data published from 2008.   Data for the United Kingdom (England & Wales, Scotland and Northern Ireland) appears separately owing to the existence of three separate jurisdictions. The data come from official sources in the countries such as the National Statistics Office, the National Prison Administration, the Ministries of the Interior or Justice and the Police. Calendar year or national financial year data are provided in absolute numbers. No statistical adjustments are carried out.   National data sets: Crimes recorded by the police (crim_gen) Crimes recorded by the police: homicide in cities (crim_hom_city) Crimes recorded by the police: historical data (total crime) 1950-2000 (crim_hist) Police officers (crim_plce) Prison population (crim_pris) Prison population: historical data 1987-2000 (crim_pris_hist)   Regional data set: For 2008, 2009 and 2010 only, data on domestic burglary, homicide, robbery and theft of motor vehicle are available at a regional level. The data were collected from countries using the definitions in the previous Eurostat questionnaire. The data are available for the European Union Member States, EFTA countries, EU Candidate countries and EU Potential candidates. Please note that unless otherwise specified, the reference metadata apply to both regional and national metadata. Crimes recorded by the police – NUTS 3 regions 2008-2010 (crim_gen_reg)

The domain "Income and living conditions" covers four topics: people at risk of poverty or social exclusion, income distribution and monetary poverty, living conditions and material deprivation, which are again structured into collections of indicators on specific topics. The collection "People at risk of poverty or social exclusion" houses main indicator on risk of poverty or social inclusion included in the Europe 2020 strategy as well as the intersections between sub-populations of all Europe 2020 indicators on poverty and social exclusion. The collection "Income distribution and monetary poverty" houses collections of indicators relating to poverty risk, poverty risk of working individuals as well as the distribution of income. The collection "Living conditions" hosts indicators relating to characteristics and living conditions of households, characteristics of the population according to different breakdowns, health and labour conditions, housing conditions as well as childcare related indicators. The collection "Material deprivation" covers indicators relating to economic strain, durables, housing deprivation and environment of the dwelling.

Annual data on crime and criminal justice are now collected through the joint Eurostat-UNODC data collection and data for 2008 onwards are available in the following Eurobase data sets: crim_off_cat, crim_hom, crim_just, crim_crt and crim_pris.  The data in Eurobase data set crim_h relate to national data on crime up to 2007 (offences recorded by the police - total crime, homicide, violent crime, robbery, domestic burglary, theft of a motor vehicle, drug trafficking), the number of police officers and the prison population are available at country level for European Union Member States, EFTA countries, EU Candidate countries, and EU Potential Candidates. Data on homicide is also available by capital cities (police areas) in these countries. The data in crim_h were collected from EU Member States using a different Eurostat questionnaire and different definitions. As a result the figures are not directly comparable with the national data published from 2008.   Data for the United Kingdom (England & Wales, Scotland and Northern Ireland) appears separately owing to the existence of three separate jurisdictions. The data come from official sources in the countries such as the National Statistics Office, the National Prison Administration, the Ministries of the Interior or Justice and the Police. Calendar year or national financial year data are provided in absolute numbers. No statistical adjustments are carried out.   National data sets: Crimes recorded by the police (crim_gen) Crimes recorded by the police: homicide in cities (crim_hom_city) Crimes recorded by the police: historical data (total crime) 1950-2000 (crim_hist) Police officers (crim_plce) Prison population (crim_pris) Prison population: historical data 1987-2000 (crim_pris_hist)   Regional data set: For 2008, 2009 and 2010 only, data on domestic burglary, homicide, robbery and theft of motor vehicle are available at a regional level. The data were collected from countries using the definitions in the previous Eurostat questionnaire. The data are available for the European Union Member States, EFTA countries, EU Candidate countries and EU Potential candidates. Please note that unless otherwise specified, the reference metadata apply to both regional and national metadata. Crimes recorded by the police – NUTS 3 regions 2008-2010 (crim_gen_reg)

Crop statistics refer to the following types of annual data: area under cultivation, harvested production, yield,  humidity and main area for cereals and for other main field crops (mainly dried pulses, root crops, fodder and industrial crops);harvested area, harvested production and main area for vegetables ;production area, harvested production and main area for permanent crop. The data are provided at national level. For some products regional figures (NUTS 1 or 2) are available too. The areas  are expressed in 1 000 hectares),  the harvested quantities in 1 000 tonnes and the yields in 100kg/ha. The information concerns more than 100 crop products. The earliest data are available from 1955 for cereals and from the early 1960's for fruits and vegetables. However, most Member States have started to send in data in the 1970's and 1980's. The statistical system has progressively improved and enlarged. The current Regulation (EC) No 543/2009 entered into force in January 2010. The annex was updated in 2015 through a Commission Delegated Regulation (EU) No 2015/1557. At present Eurostat receives and publishes harmonised statistical data from 28 Member States, form the EFTA countries and from the candidate and potential candidate countries broken down in: 17 categories and subcategories for cereals;29 categories and  subcategories for other main crops (mainly dry pulses and protein crops, root crops industrial crops and plants harvested green from arable land);40 categories and subcategories for vegetables;41 categories and subcategories for permanent crops;18 categories and subcategories for the Utilised Agricultural Area (UAA). For the full list of crops, please consult Annex 1. Some additional crops and transmission deadlines are covered by an ESS agreement on annual crop statistics. The main data sources are administrative records, surveys and expert estimates. National Statistical Institutes or Ministries of Agriculture are responsible for the national data collection in accordance with the Regulations and agreements in force. Eurostat is responsible for drawing the EU aggregations. Regional metadata Please note that for paragraphs where no metadata for regional data has been specified the regional metadata is identical to the metadata for the national data.

Crop statistics refer to the following types of annual data: area, production harvested and yield for cereals and for other main field crops (mainly dried pulses, root crops, fodder and industrial crops);area, production harvested and yield for a large number of fruits and vegetableshumidity of the harvested crop (humidity content in %)agricultural land use. The statistics provide, for a given product, the area, the yield and the production harvested during the crop year at national level. For some products regional figures (NUTS 1 or 2) are available too. The data refer to areas under cultivation (expressed in 1 000 hectares), the quantity harvested (expressed in 1 000 tonnes) and the yield (expressed in 100kg/ha). The information concerns more than 100 crop products. The earliest data are available from 1955 for cereals and from the early 1960's for fruits and vegetables. However most Member States have started to send in data in the 1970's and 1980's. The statistical system has progressively improved and enlarged. The current Regulation (EC) No 543/2009 entered into force in January 2010. It simplified the data collection and reduced the number of crop sub-classes. At present Eurostat receives and publishes harmonised statistical data from 28 Member States broken down in: 17 categories and subcategories for cereals;30 categories and  subcategories for other main crops (mainly Dried pulses, Root crops and Industrial crops);40 categories and subcategories for vegetables;41 categories and subcategories for fruits;18 categories and subcategories for UAA (Utilised Agricultural Area).For the full list of crops, please consult Annex 1 . Some data are available also for Iceland, Norway, Switzerland, Albania, Montenegro. Former Yugoslav Republic of Macedonia, Serbia, Kosovo (under United Nations Security Council Resolution 1244/99), Bosnia Herzegovina and Turkey as well. Some additional crops are covered bya Gentlemen's agreement. These data is provided on voluntary basis by the Member States. The list of crops collected under the gentlemen's agreements is included in Annex 1. The main data sources are administrative records, surveys and expert estimates. National Statistical Institutes or Ministries of Agriculture are responsible for the national data collection in accordance with EC Regulations. Eurostat is responsible for drawing the EU aggregations. Regional metadata Please note that for paragraphs where no metadata for regional data has been specified the regional metadata is identical to the metadata for the national data.

The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections: Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States: a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups: general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

Not applicable

Data on marriages and divorces at national level are based on the annual demographic data collections in the field of demography carried out by Eurostat. The completeness of information depends on the availability of data reported by the National Statistical Institutes. The Joint demographic data collection is carried out in cooperation with United Nation Statistical Division (UNSD) in the summer of each year, having the deadline 15 September. During this data collection Eurostat collects from the national statistical institutes detailed data by sex, age and other characteristics for the demographic events (births, deaths, marriages and divorces) of the previous year and the population on 1 January of the current and previous years. More specifically, during year T the following data are collected and disseminated on fertility field: - total number of marriages and divorces - persons getting married during the reference year by previous legal marital status, year T-1 Data can be found under the section Marriages and divorces (demo_nup). The information is updated towards the end of each year based on information collected during the Joint data collection. Moreover, any update sent by the countries in-between data collections are validated, processed and uploaded into Eurostat's demographic database and in Eurostat's free dissemination online database as soon as possible. Aggregates are recalculated accordingly. The data transmitted by the National Statistical Institutes are validated by Eurostat, processed and uploaded into Eurostat's Demographic Database and in Eurostat's free dissemination online database. The data are also disseminated in several thematic and horizontal Eurostat's publications. Data are presented by single country and for aggregates of countries. For EU and Euro Area, only the current and the previous version of the aggregates are published. The currently disseminated aggregates are: EU-27, EU-25, EA-16, and EA-15. Moreover, data is disseminated for the European Economic Area (EEA) and the European Free Trade Association (EFTA). International marriages and divorces Statistics on the number of international marriages and divorces (2000-2007) were collected by Eurostat from national statistical institutes in September 2008. The data were further used by the European Commission for preparing  a proposal for a Council Regulation on the law applicable in divorce and legal separation.  These data collected are available upon request.

Data on marriages and divorces at national level are based on the annual demographic data collections in the field of demography carried out by Eurostat. The completeness of information depends on the availability of data reported by the National Statistical Institutes. The Joint demographic data collection is carried out in cooperation with United Nation Statistical Division (UNSD) in the summer of each year, having the deadline 15 September. During this data collection Eurostat collects from the national statistical institutes detailed data by sex, age and other characteristics for the demographic events (births, deaths, marriages and divorces) of the previous year and the population on 1 January of the current and previous years. More specifically, during year T the following data are collected and disseminated on fertility field: - total number of marriages and divorces - persons getting married during the reference year by previous legal marital status, year T-1 Data can be found under the section Marriages and divorces (demo_nup). The information is updated towards the end of each year based on information collected during the Joint data collection. Moreover, any update sent by the countries in-between data collections are validated, processed and uploaded into Eurostat's demographic database and in Eurostat's free dissemination online database as soon as possible. Aggregates are recalculated accordingly. The data transmitted by the National Statistical Institutes are validated by Eurostat, processed and uploaded into Eurostat's Demographic Database and in Eurostat's free dissemination online database. The data are also disseminated in several thematic and horizontal Eurostat's publications. Data are presented by single country and for aggregates of countries. For EU and Euro Area, only the current and the previous version of the aggregates are published. The currently disseminated aggregates are: EU-27, EU-25, EA-16, and EA-15. Moreover, data is disseminated for the European Economic Area (EEA) and the European Free Trade Association (EFTA). International marriages and divorces Statistics on the number of international marriages and divorces (2000-2007) were collected by Eurostat from national statistical institutes in September 2008. The data were further used by the European Commission for preparing  a proposal for a Council Regulation on the law applicable in divorce and legal separation.  These data collected are available upon request.

These metadata refer to the annual population data under Population / Demography domain in Eurostat's Dissemination data tree. Eurostat carries on annual demography data collections with the aim of collecting from the National Statistical Institutes detailed data on population, vital events, marriages and divorces. These data are validated, processed and disseminated. Further on, Eurostat uses the collected detailed data to compute and disseminate demographic indicators at country level, at regional level and at EU level, by applying harmonized methods of calculation. The demography data collections are done on voluntary basis and the completeness of information depends on the availability of data reported by the National Statistical Institutes. The first demography data collection of each year, named Rapid, is carried out in April-May (deadline 15 May). Within this data collection the first results on the main demographic developments in the previous year (T-1) and the population on 1st January of the current year (T) are collected from the National Statistical Institutes. A second annual data collection, Joint Demography data collection, is carried out in cooperation with United Nation Statistical Division (UNSD) in the summer of each year, having the deadline 15 September. Within this data collection Eurostat collects from the National Statistical Institutes detailed data on the demographic events (births, deaths, marriages and divorces) of the previous year (T-1) and the population on 1st January of the current year (T), broken down by sex, age and other characteristics. The Nowcast Demography data collection is carried out in October-November (deadline 15 November). The monthly time series on births, deaths, immigrants and emigrants available from the beginning of current year (T) are collected, with the purpose of producing by the end of the current year (T) a forecast on 1st January population of the following year (T+1). The Regional Demography data collection is carried out in November-December (deadline 15 December). It is based on the regional breakdown of the countries agreed at EU level using the latest version of the Nomenclature of Territorial Units for Statistics (NUTS) and of the Statistical regions for the EFTA and Candidate countries. Within this data collection Eurostat collects from the National Statistical Institutes data by NUTS level 1, 2 and 3 for the vital events taking place in the previous year (T-1) and the population figures on 1st January of the current year (T). Any updates sent by the National Statistical Institutes in-between data collections are validated, processed and disseminated in Eurostat's online database as soon as possible. The European aggregates and the demographic indicators are updated accordingly. Please note:The tables presenting population on 1 January figures by various breakdowns may display variations in the total population for some countries at a given moment in time. This may occur due to one of the following reasons: - The timing of the transmission to Eurostat of the population data for various breakdown may lead to different population on 1 January figures displayed in different population tables at a given moment in time. - The transmission to Eurostat of the post-census population revisions (following the 2011 population Censuses) is expected to be done by the national statistical offices gradually for the population breakdowns. The time series of populations between the previous census taking place in the country and 2011 will be revised by end 2013 by some of the countries, taking into account Eurostat’s recommendation. The following countries have transmitted to Eurostat post-2011 Census population revisions, broken down by age and sex, by autumn of 2013, which are reflected in the tables ‘Demographic balance and crude rates (demo_gind)’, ‘Population on 1 January by age and sex (demo_pjan)’, ‘Population on 1 January by five years age groups and sex (demo_pjangroup)’ and ‘Population on 1 January by broad age group and sex (demo_pjanbroad)’: BG 2007-2011; CZ 2001-2011; EE 2000-2011; IE 2007-2011; EL 2011; ES 2002-2011; HR 2001-2011; CY 2003-2011; LV 2001-2011; LT 2001-2011; MT 2006-2011; AT 2008-2011; PT 1992-2011; RO 2002-2011; SK 2002-2011; UK 2002-2011 (not including post-2011 Census data for Scotland); ME 2010-2011; RS 2011. As regards the the population data for the year 2012 and after, for most of the countries these take into account the results of the latest population census (held in 2011). IT 2012-2013 and DE 2012-2013 reported only the total post-2011 Census populations which are published in the table ‘Demographic balance and crude rates (demo_gind)’. The breakdown by age and sex will follow later on. - The succession of the annual demography data collections described above, which collect and update population breakdowns at different moment during the calendar year. - The calendar of the national statistical offices for producing and releasing population broken down by various topics, respectively the timings when data are transmitted to Eurostat. The most updated data on total population on 1st January and on the total number of live births and deaths may be found in the table 'Demographic balance and crude rates (demo_gind)' of the online 'Database by theme'. This table includes the latest updates (or revised data) on total population, births and deaths reported by the countries, while the detailed breakdowns by various characteristics included in the rest of the tables of the Demography domain (and also for Population by citizenship and by country of birth) may be transmitted to Eurostat at a subsequent date.

20.1. Source data

These metadata refer to the annual population data under Population / Demography domain in Eurostat's Dissemination data tree. Eurostat carries on annual demography data collections with the aim of collecting from the National Statistical Institutes detailed data on population, vital events, marriages and divorces. These data are validated, processed and disseminated. Further on, Eurostat uses the collected detailed data to compute and disseminate demographic indicators at country level, at regional level and at EU level, by applying harmonized methods of calculation. The demography data collections are done on voluntary basis and the completeness of information depends on the availability of data reported by the National Statistical Institutes. The first demography data collection of each year, named Rapid, is carried out in April-May (deadline 15 May). Within this data collection the first results on the main demographic developments in the previous year (T-1) and the population on 1st January of the current year (T) are collected from the National Statistical Institutes. A second annual data collection, Joint Demography data collection, is carried out in cooperation with United Nation Statistical Division (UNSD) in the summer of each year, having the deadline 15 September. Within this data collection Eurostat collects from the National Statistical Institutes detailed data on the demographic events (births, deaths, marriages and divorces) of the previous year (T-1) and the population on 1st January of the current year (T), broken down by sex, age and other characteristics. The Nowcast Demography data collection is carried out in October-November (deadline 15 November). The monthly time series on births, deaths, immigrants and emigrants available from the beginning of current year (T) are collected, with the purpose of producing by the end of the current year (T) a forecast on 1st January population of the following year (T+1). The Regional Demography data collection is carried out in November-December (deadline 15 December). It is based on the regional breakdown of the countries agreed at EU level using the latest version of the Nomenclature of Territorial Units for Statistics (NUTS) and of the Statistical regions for the EFTA and Candidate countries. Within this data collection Eurostat collects from the National Statistical Institutes data by NUTS level 1, 2 and 3 for the vital events taking place in the previous year (T-1) and the population figures on 1st January of the current year (T). Any updates sent by the National Statistical Institutes in-between data collections are validated, processed and disseminated in Eurostat's online database as soon as possible. The European aggregates and the demographic indicators are updated accordingly. Please note:The tables presenting population on 1 January figures by various breakdowns may display variations in the total population for some countries at a given moment in time. This may occur due to one of the following reasons: - The timing of the transmission to Eurostat of the population data for various breakdown may lead to different population on 1 January figures displayed in different population tables at a given moment in time. - The transmission to Eurostat of the post-census population revisions (following the 2011 population Censuses) is expected to be done by the national statistical offices gradually for the population breakdowns. The time series of populations between the previous census taking place in the country and 2011 will be revised by end 2013 by some of the countries, taking into account Eurostat’s recommendation. The following countries have transmitted to Eurostat post-2011 Census population revisions, broken down by age and sex, by autumn of 2013, which are reflected in the tables ‘Demographic balance and crude rates (demo_gind)’, ‘Population on 1 January by age and sex (demo_pjan)’, ‘Population on 1 January by five years age groups and sex (demo_pjangroup)’ and ‘Population on 1 January by broad age group and sex (demo_pjanbroad)’: BG 2007-2011; CZ 2001-2011; EE 2000-2011; IE 2007-2011; EL 2011; ES 2002-2011; HR 2001-2011; CY 2003-2011; LV 2001-2011; LT 2001-2011; MT 2006-2011; AT 2008-2011; PT 1992-2011; RO 2002-2011; SK 2002-2011; UK 2002-2011 (not including post-2011 Census data for Scotland); ME 2010-2011; RS 2011. As regards the the population data for the year 2012 and after, for most of the countries these take into account the results of the latest population census (held in 2011). IT 2012-2013 and DE 2012-2013 reported only the total post-2011 Census populations which are published in the table ‘Demographic balance and crude rates (demo_gind)’. The breakdown by age and sex will follow later on. - The succession of the annual demography data collections described above, which collect and update population breakdowns at different moment during the calendar year. - The calendar of the national statistical offices for producing and releasing population broken down by various topics, respectively the timings when data are transmitted to Eurostat. The most updated data on total population on 1st January and on the total number of live births and deaths may be found in the table 'Demographic balance and crude rates (demo_gind)' of the online 'Database by theme'. This table includes the latest updates (or revised data) on total population, births and deaths reported by the countries, while the detailed breakdowns by various characteristics included in the rest of the tables of the Demography domain (and also for Population by citizenship and by country of birth) may be transmitted to Eurostat at a subsequent date.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a geographical region during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services, a component of BoP current account, and data on Foreign Direct Investment, a component of BoP financial account, are used to monitor the external commercial performance of different economies. Outward Foreign Affiliates Statistics (FATS) measure the commercial presence, as defined by the General Agreement on Trade in Services (GATS), through affiliates in foreign markets. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports.  Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU or in millions of national currency. Balance of Payments data coverage varies according to the collection. Some collections refer only to Euro area or EU countries, while some others' coverage includes also EU partner countries.   Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide 2003. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.    More information on BoP is available for each specific collection: Quarterly BoP, ITS, FDI, Outward FATS, BoP of EU Institutions.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a geographical region during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services, a component of BoP current account, and data on Foreign Direct Investment, a component of BoP financial account, are used to monitor the external commercial performance of different economies. Outward Foreign Affiliates Statistics (FATS) measure the commercial presence, as defined by the General Agreement on Trade in Services (GATS), through affiliates in foreign markets. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports.  Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU or in millions of national currency. Balance of Payments data coverage varies according to the collection. Some collections refer only to Euro area or EU countries, while some others' coverage includes also EU partner countries.   Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide 2003. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.    More information on BoP is available for each specific collection: Quarterly BoP, ITS, FDI, Outward FATS, BoP of EU Institutions.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services (ITS), a component of BoP current account, are used, alongside with data on Foreign Direct Investment (a component of BoP financial account), to monitor the external commercial performance of different economies. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports. Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU and in millions of national currency. Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services (ITS), a component of BoP current account, are used, alongside with data on Foreign Direct Investment (a component of BoP financial account), to monitor the external commercial performance of different economies. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports. Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU and in millions of national currency. Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services (ITS), a component of BoP current account, are used, alongside with data on Foreign Direct Investment (a component of BoP financial account), to monitor the external commercial performance of different economies. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports. Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU and in millions of national currency. Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services (ITS), a component of BoP current account, are used, alongside with data on Foreign Direct Investment (a component of BoP financial account), to monitor the external commercial performance of different economies. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports. Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU and in millions of national currency. Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services (ITS), a component of BoP current account, are used, alongside with data on Foreign Direct Investment (a component of BoP financial account), to monitor the external commercial performance of different economies. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports. Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU and in millions of national currency. Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.

Total Official Flows: the sum of Official Development Assistance (ODA) and Other Official Flows (OOF) represents the total (gross or net) disbursements by the official sector at large to the recipient country shown.

The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections: Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States: a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups: general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

Eurostat statistics on mortality are based on the annual demographic data collection in the field of demography carried out by Eurostat. The completeness of information depends on the availability of data reported by the National Statistical Institutes. The first demographic data collection of each year (T), named Rapid, is carried out in April-May (deadline 15 May of year T); during this data collection the first results on the main demographic developments in the previous year (T-1) and the population on 1 January of the current year (T) are collected from the National Statistical Institutes. The Joint demographic data collection is carried out in cooperation with United Nation Statistical Division (UNSD) in the summer of each year, having the deadline 15 September. During this data collection Eurostat collects from the National Statistical Institutes detailed data by sex, age and other characteristics for the demographic events (births, deaths, marriages and divorces) of the previous year and the population on 1 January of the current and previous years. The Nowcast demographic data collection is carried out in October-November (deadline 15 November of year T). The monthly time series on births, deaths, immigrants and emigrants available from the beginning of current year (T) are collected, with the purpose of producing a forecast on 1 January population of the following year (T+1). More specifically, during year T the following data are collected and disseminated on mortality field: - Total number of deaths in year (T-1) - Infant mortality by age and sex (T-1) - Late foetal deaths by mother's age (T-1) - Deaths by age, year of birth and sex (T-1) - Deaths by age, sex and educational attainment (ISCED 1997) - Deaths by month, year (T) and (T-1) Based on these information, Eurostat currently computes and disseminates the following mortality indicators: - Crude death rate - Infant mortality rate - Neonatal mortality rate - Early neonatal mortality rate - Late foetal mortality rate - Perinatal mortality rate - Life table - Life expectancy by age and sex - Life expectancy by age, sex and educational attainment (ISCED 1997)  The most recent (aggregated) data on the number of deaths can be found under the Main demographic indicators. This includes also the most recent Eurostat now casts on the main demographic indicators (population, births, deaths and net migration including statistical adjustment). In principle, the table containing the main demographic indicators is updated three times per year, after each of the national data collections. Detailed information on mortality (by age, sex, etc.) can be found under the section Mortality (demo_mor). These disaggregated information are updated towards the end of each year based on information collected during the Joint data collection. Moreover, any update sent by the countries in-between data collections are validated, processed and uploaded into Eurostat's demographic database and in Eurostat's free dissemination online database as soon as possible. The geographical aggregates are recalculated accordingly. The data transmitted by the National Statistical Institutes are validated by Eurostat, processed and uploaded into Eurostat's Demographic Database and in Eurostat's free dissemination online database. The data are also disseminated in several thematic and horizontal Eurostat's publications. Data are presented at national level and for aggregates of countries. For EU and Euro Area, only the current and the previous geographical status are published. The currently disseminated geographical aggregates are: EU-27, EU-25, EA-16, and EA-15. Moreover, data is disseminated for the European Economic Area (EEA) and the European Free Trade Association (EFTA).

Eurostat statistics on mortality are based on the annual demographic data collection in the field of demography carried out by Eurostat. The completeness of information depends on the availability of data reported by the National Statistical Institutes. The first demographic data collection of each year (T), named Rapid, is carried out in April-May (deadline 15 May of year T); during this data collection the first results on the main demographic developments in the previous year (T-1) and the population on 1 January of the current year (T) are collected from the National Statistical Institutes. The Joint demographic data collection is carried out in cooperation with United Nation Statistical Division (UNSD) in the summer of each year, having the deadline 15 September. During this data collection Eurostat collects from the National Statistical Institutes detailed data by sex, age and other characteristics for the demographic events (births, deaths, marriages and divorces) of the previous year and the population on 1 January of the current and previous years. The Nowcast demographic data collection is carried out in October-November (deadline 15 November of year T). The monthly time series on births, deaths, immigrants and emigrants available from the beginning of current year (T) are collected, with the purpose of producing a forecast on 1 January population of the following year (T+1). More specifically, during year T the following data are collected and disseminated on mortality field: - Total number of deaths in year (T-1) - Infant mortality by age and sex (T-1) - Late foetal deaths by mother's age (T-1) - Deaths by age, year of birth and sex (T-1) - Deaths by age, sex and educational attainment (ISCED 1997) - Deaths by month, year (T) and (T-1) Based on these information, Eurostat currently computes and disseminates the following mortality indicators: - Crude death rate - Infant mortality rate - Neonatal mortality rate - Early neonatal mortality rate - Late foetal mortality rate - Perinatal mortality rate - Life table - Life expectancy by age and sex - Life expectancy by age, sex and educational attainment (ISCED 1997)  The most recent (aggregated) data on the number of deaths can be found under the Main demographic indicators. This includes also the most recent Eurostat now casts on the main demographic indicators (population, births, deaths and net migration including statistical adjustment). In principle, the table containing the main demographic indicators is updated three times per year, after each of the national data collections. Detailed information on mortality (by age, sex, etc.) can be found under the section Mortality (demo_mor). These disaggregated information are updated towards the end of each year based on information collected during the Joint data collection. Moreover, any update sent by the countries in-between data collections are validated, processed and uploaded into Eurostat's demographic database and in Eurostat's free dissemination online database as soon as possible. The geographical aggregates are recalculated accordingly. The data transmitted by the National Statistical Institutes are validated by Eurostat, processed and uploaded into Eurostat's Demographic Database and in Eurostat's free dissemination online database. The data are also disseminated in several thematic and horizontal Eurostat's publications. Data are presented at national level and for aggregates of countries. For EU and Euro Area, only the current and the previous geographical status are published. The currently disseminated geographical aggregates are: EU-27, EU-25, EA-16, and EA-15. Moreover, data is disseminated for the European Economic Area (EEA) and the European Free Trade Association (EFTA).

Eurostat statistics on mortality are based on the annual demographic data collection in the field of demography carried out by Eurostat. The completeness of information depends on the availability of data reported by the National Statistical Institutes. The first demographic data collection of each year (T), named Rapid, is carried out in April-May (deadline 15 May of year T); during this data collection the first results on the main demographic developments in the previous year (T-1) and the population on 1 January of the current year (T) are collected from the National Statistical Institutes. The Joint demographic data collection is carried out in cooperation with United Nation Statistical Division (UNSD) in the summer of each year, having the deadline 15 September. During this data collection Eurostat collects from the National Statistical Institutes detailed data by sex, age and other characteristics for the demographic events (births, deaths, marriages and divorces) of the previous year and the population on 1 January of the current and previous years. The Nowcast demographic data collection is carried out in October-November (deadline 15 November of year T). The monthly time series on births, deaths, immigrants and emigrants available from the beginning of current year (T) are collected, with the purpose of producing a forecast on 1 January population of the following year (T+1). More specifically, during year T the following data are collected and disseminated on mortality field: - Total number of deaths in year (T-1) - Infant mortality by age and sex (T-1) - Late foetal deaths by mother's age (T-1) - Deaths by age, year of birth and sex (T-1) - Deaths by age, sex and educational attainment (ISCED 1997) - Deaths by month, year (T) and (T-1) Based on these information, Eurostat currently computes and disseminates the following mortality indicators: - Crude death rate - Infant mortality rate - Neonatal mortality rate - Early neonatal mortality rate - Late foetal mortality rate - Perinatal mortality rate - Life table - Life expectancy by age and sex - Life expectancy by age, sex and educational attainment (ISCED 1997)  The most recent (aggregated) data on the number of deaths can be found under the Main demographic indicators. This includes also the most recent Eurostat now casts on the main demographic indicators (population, births, deaths and net migration including statistical adjustment). In principle, the table containing the main demographic indicators is updated three times per year, after each of the national data collections. Detailed information on mortality (by age, sex, etc.) can be found under the section Mortality (demo_mor). These disaggregated information are updated towards the end of each year based on information collected during the Joint data collection. Moreover, any update sent by the countries in-between data collections are validated, processed and uploaded into Eurostat's demographic database and in Eurostat's free dissemination online database as soon as possible. The geographical aggregates are recalculated accordingly. The data transmitted by the National Statistical Institutes are validated by Eurostat, processed and uploaded into Eurostat's Demographic Database and in Eurostat's free dissemination online database. The data are also disseminated in several thematic and horizontal Eurostat's publications. Data are presented at national level and for aggregates of countries. For EU and Euro Area, only the current and the previous geographical status are published. The currently disseminated geographical aggregates are: EU-27, EU-25, EA-16, and EA-15. Moreover, data is disseminated for the European Economic Area (EEA) and the European Free Trade Association (EFTA).

Eurostat statistics on mortality are based on the annual demographic data collection in the field of demography carried out by Eurostat. The completeness of information depends on the availability of data reported by the National Statistical Institutes. The first demographic data collection of each year (T), named Rapid, is carried out in April-May (deadline 15 May of year T); during this data collection the first results on the main demographic developments in the previous year (T-1) and the population on 1 January of the current year (T) are collected from the National Statistical Institutes. The Joint demographic data collection is carried out in cooperation with United Nation Statistical Division (UNSD) in the summer of each year, having the deadline 15 September. During this data collection Eurostat collects from the National Statistical Institutes detailed data by sex, age and other characteristics for the demographic events (births, deaths, marriages and divorces) of the previous year and the population on 1 January of the current and previous years. The Nowcast demographic data collection is carried out in October-November (deadline 15 November of year T). The monthly time series on births, deaths, immigrants and emigrants available from the beginning of current year (T) are collected, with the purpose of producing a forecast on 1 January population of the following year (T+1). More specifically, during year T the following data are collected and disseminated on mortality field: - Total number of deaths in year (T-1) - Infant mortality by age and sex (T-1) - Late foetal deaths by mother's age (T-1) - Deaths by age, year of birth and sex (T-1) - Deaths by age, sex and educational attainment (ISCED 1997) - Deaths by month, year (T) and (T-1) Based on these information, Eurostat currently computes and disseminates the following mortality indicators: - Crude death rate - Infant mortality rate - Neonatal mortality rate - Early neonatal mortality rate - Late foetal mortality rate - Perinatal mortality rate - Life table - Life expectancy by age and sex - Life expectancy by age, sex and educational attainment (ISCED 1997)  The most recent (aggregated) data on the number of deaths can be found under the Main demographic indicators. This includes also the most recent Eurostat now casts on the main demographic indicators (population, births, deaths and net migration including statistical adjustment). In principle, the table containing the main demographic indicators is updated three times per year, after each of the national data collections. Detailed information on mortality (by age, sex, etc.) can be found under the section Mortality (demo_mor). These disaggregated information are updated towards the end of each year based on information collected during the Joint data collection. Moreover, any update sent by the countries in-between data collections are validated, processed and uploaded into Eurostat's demographic database and in Eurostat's free dissemination online database as soon as possible. The geographical aggregates are recalculated accordingly. The data transmitted by the National Statistical Institutes are validated by Eurostat, processed and uploaded into Eurostat's Demographic Database and in Eurostat's free dissemination online database. The data are also disseminated in several thematic and horizontal Eurostat's publications. Data are presented at national level and for aggregates of countries. For EU and Euro Area, only the current and the previous geographical status are published. The currently disseminated geographical aggregates are: EU-27, EU-25, EA-16, and EA-15. Moreover, data is disseminated for the European Economic Area (EEA) and the European Free Trade Association (EFTA).

Eurostat statistics on mortality are based on the annual demographic data collection in the field of demography carried out by Eurostat. The completeness of information depends on the availability of data reported by the National Statistical Institutes. The first demographic data collection of each year (T), named Rapid, is carried out in April-May (deadline 15 May of year T); during this data collection the first results on the main demographic developments in the previous year (T-1) and the population on 1 January of the current year (T) are collected from the National Statistical Institutes. The Joint demographic data collection is carried out in cooperation with United Nation Statistical Division (UNSD) in the summer of each year, having the deadline 15 September. During this data collection Eurostat collects from the National Statistical Institutes detailed data by sex, age and other characteristics for the demographic events (births, deaths, marriages and divorces) of the previous year and the population on 1 January of the current and previous years. The Nowcast demographic data collection is carried out in October-November (deadline 15 November of year T). The monthly time series on births, deaths, immigrants and emigrants available from the beginning of current year (T) are collected, with the purpose of producing a forecast on 1 January population of the following year (T+1). More specifically, during year T the following data are collected and disseminated on mortality field: - Total number of deaths in year (T-1) - Infant mortality by age and sex (T-1) - Late foetal deaths by mother's age (T-1) - Deaths by age, year of birth and sex (T-1) - Deaths by age, sex and educational attainment (ISCED 1997) - Deaths by month, year (T) and (T-1) Based on these information, Eurostat currently computes and disseminates the following mortality indicators: - Crude death rate - Infant mortality rate - Neonatal mortality rate - Early neonatal mortality rate - Late foetal mortality rate - Perinatal mortality rate - Life table - Life expectancy by age and sex - Life expectancy by age, sex and educational attainment (ISCED 1997)  The most recent (aggregated) data on the number of deaths can be found under the Main demographic indicators. This includes also the most recent Eurostat now casts on the main demographic indicators (population, births, deaths and net migration including statistical adjustment). In principle, the table containing the main demographic indicators is updated three times per year, after each of the national data collections. Detailed information on mortality (by age, sex, etc.) can be found under the section Mortality (demo_mor). These disaggregated information are updated towards the end of each year based on information collected during the Joint data collection. Moreover, any update sent by the countries in-between data collections are validated, processed and uploaded into Eurostat's demographic database and in Eurostat's free dissemination online database as soon as possible. The geographical aggregates are recalculated accordingly. The data transmitted by the National Statistical Institutes are validated by Eurostat, processed and uploaded into Eurostat's Demographic Database and in Eurostat's free dissemination online database. The data are also disseminated in several thematic and horizontal Eurostat's publications. Data are presented at national level and for aggregates of countries. For EU and Euro Area, only the current and the previous geographical status are published. The currently disseminated geographical aggregates are: EU-27, EU-25, EA-16, and EA-15. Moreover, data is disseminated for the European Economic Area (EEA) and the European Free Trade Association (EFTA).

Eurostat statistics on mortality are based on the annual demographic data collection in the field of demography carried out by Eurostat. The completeness of information depends on the availability of data reported by the National Statistical Institutes. The first demographic data collection of each year (T), named Rapid, is carried out in April-May (deadline 15 May of year T); during this data collection the first results on the main demographic developments in the previous year (T-1) and the population on 1 January of the current year (T) are collected from the National Statistical Institutes. The Joint demographic data collection is carried out in cooperation with United Nation Statistical Division (UNSD) in the summer of each year, having the deadline 15 September. During this data collection Eurostat collects from the National Statistical Institutes detailed data by sex, age and other characteristics for the demographic events (births, deaths, marriages and divorces) of the previous year and the population on 1 January of the current and previous years. The Nowcast demographic data collection is carried out in October-November (deadline 15 November of year T). The monthly time series on births, deaths, immigrants and emigrants available from the beginning of current year (T) are collected, with the purpose of producing a forecast on 1 January population of the following year (T+1). More specifically, during year T the following data are collected and disseminated on mortality field: - Total number of deaths in year (T-1) - Infant mortality by age and sex (T-1) - Late foetal deaths by mother's age (T-1) - Deaths by age, year of birth and sex (T-1) - Deaths by age, sex and educational attainment (ISCED 1997) - Deaths by month, year (T) and (T-1) Based on these information, Eurostat currently computes and disseminates the following mortality indicators: - Crude death rate - Infant mortality rate - Neonatal mortality rate - Early neonatal mortality rate - Late foetal mortality rate - Perinatal mortality rate - Life table - Life expectancy by age and sex - Life expectancy by age, sex and educational attainment (ISCED 1997)  The most recent (aggregated) data on the number of deaths can be found under the Main demographic indicators. This includes also the most recent Eurostat now casts on the main demographic indicators (population, births, deaths and net migration including statistical adjustment). In principle, the table containing the main demographic indicators is updated three times per year, after each of the national data collections. Detailed information on mortality (by age, sex, etc.) can be found under the section Mortality (demo_mor). These disaggregated information are updated towards the end of each year based on information collected during the Joint data collection. Moreover, any update sent by the countries in-between data collections are validated, processed and uploaded into Eurostat's demographic database and in Eurostat's free dissemination online database as soon as possible. The geographical aggregates are recalculated accordingly. The data transmitted by the National Statistical Institutes are validated by Eurostat, processed and uploaded into Eurostat's Demographic Database and in Eurostat's free dissemination online database. The data are also disseminated in several thematic and horizontal Eurostat's publications. Data are presented at national level and for aggregates of countries. For EU and Euro Area, only the current and the previous geographical status are published. The currently disseminated geographical aggregates are: EU-27, EU-25, EA-16, and EA-15. Moreover, data is disseminated for the European Economic Area (EEA) and the European Free Trade Association (EFTA).

Eurostat statistics on mortality are based on the annual demographic data collection in the field of demography carried out by Eurostat. The completeness of information depends on the availability of data reported by the National Statistical Institutes. The first demographic data collection of each year (T), named Rapid, is carried out in April-May (deadline 15 May of year T); during this data collection the first results on the main demographic developments in the previous year (T-1) and the population on 1 January of the current year (T) are collected from the National Statistical Institutes. The Joint demographic data collection is carried out in cooperation with United Nation Statistical Division (UNSD) in the summer of each year, having the deadline 15 September. During this data collection Eurostat collects from the National Statistical Institutes detailed data by sex, age and other characteristics for the demographic events (births, deaths, marriages and divorces) of the previous year and the population on 1 January of the current and previous years. The Nowcast demographic data collection is carried out in October-November (deadline 15 November of year T). The monthly time series on births, deaths, immigrants and emigrants available from the beginning of current year (T) are collected, with the purpose of producing a forecast on 1 January population of the following year (T+1). More specifically, during year T the following data are collected and disseminated on mortality field: - Total number of deaths in year (T-1) - Infant mortality by age and sex (T-1) - Late foetal deaths by mother's age (T-1) - Deaths by age, year of birth and sex (T-1) - Deaths by age, sex and educational attainment (ISCED 1997) - Deaths by month, year (T) and (T-1) Based on these information, Eurostat currently computes and disseminates the following mortality indicators: - Crude death rate - Infant mortality rate - Neonatal mortality rate - Early neonatal mortality rate - Late foetal mortality rate - Perinatal mortality rate - Life table - Life expectancy by age and sex - Life expectancy by age, sex and educational attainment (ISCED 1997)  The most recent (aggregated) data on the number of deaths can be found under the Main demographic indicators. This includes also the most recent Eurostat now casts on the main demographic indicators (population, births, deaths and net migration including statistical adjustment). In principle, the table containing the main demographic indicators is updated three times per year, after each of the national data collections. Detailed information on mortality (by age, sex, etc.) can be found under the section Mortality (demo_mor). These disaggregated information are updated towards the end of each year based on information collected during the Joint data collection. Moreover, any update sent by the countries in-between data collections are validated, processed and uploaded into Eurostat's demographic database and in Eurostat's free dissemination online database as soon as possible. The geographical aggregates are recalculated accordingly. The data transmitted by the National Statistical Institutes are validated by Eurostat, processed and uploaded into Eurostat's Demographic Database and in Eurostat's free dissemination online database. The data are also disseminated in several thematic and horizontal Eurostat's publications. Data are presented at national level and for aggregates of countries. For EU and Euro Area, only the current and the previous geographical status are published. The currently disseminated geographical aggregates are: EU-27, EU-25, EA-16, and EA-15. Moreover, data is disseminated for the European Economic Area (EEA) and the European Free Trade Association (EFTA).

This is the sixth edition of the Economist Intelligence Unit’s Democracy index. It reflects the situation at the end of 2013. The Democracy index is based on five categories: electoral process and pluralism; civil liberties; the functioning of government; political participation; and political culture. Countries are placed within one of four types of regimes: full democracies; flawed democracies; hybrid regimes; and authoritarian regimes.

IHME results, published in November 2010, provide a global assessment of trends in development assistance for health (DAH) from 1990 to 2008 and preliminary estimates for 2009 and 2010. The report, Financing Global Health 2010: Development Assistance and Country Spending in Economic Uncertainty, compiles contributions by all significant public and private channels of development assistance for improving health outcomes and strengthening health systems in low- and middle-income countries. Suggested Citation: Institute for Health Metrics and Evaluation. Development Assistance for Health Estimates 1990-2010 Tables. Seattle, United States: Institute for Health Metrics and Evaluation, 2010.

Development Statistics of Montenegro, 2014

Data given in this domain are collected annually by the National Statistical Institutes and are based on Eurostat's annual model questionnaires on ICT (Information and Communication Technologies) usage in households and by individuals. Large part of the data collected are used in the context of the 2011 - 2015 benchmarking framework (endorsed by i2010 High Level Group in November 2009) for the Digital Agenda Scoreboard, Europe's strategy for a flourishing digital economy by 2020. This conceptual framework follows the i2010 Benchmarking Framework which itself followed-up the eEurope 2005 Action Plan. ICT usage data are also used in the Consumer Conditions Scoreboard (purchases over the Internet) and in the Employment Guidelines (e-skills of individuals). The aim of the European ICT surveys is the timely provision of statistics on individuals and households on the use of Information and Communication Technologies at European level. Data for this collection are supplied directly from the surveys with no separate treatment. Coverage: The characteristics to be provided are drawn from the following list of subjects:access to and use of ICTs by individuals and/or in households,use of the Internet and other electronic networks for different purposes by individuals and/or in households,ICT security and trust,ICT competence and skills,barriers to the use of ICT and the Internet,perceived effects of ICT usage on individuals and/or on households,use of ICT by individuals to exchange information and services with governments and public administrations (e-government),access to and use of technologies enabling connection to the Internet or other networks from anywhere at any time (ubiquitous connectivity). Breakdowns (see details of available breakdowns): Relating to households:by region of residence (NUTS 1, optional: NUTS 2)by geographical location: less developed regions, transition regions, more developed regionsby degree of urbanisation (till 2012: densely/intermediate/sparsely populated areas; from 2012: densely/thinly populated area, intermediate density area) by type of householdby households net monthly income (optional) Relating to individuals:by region of residence (NUTS1, optional: NUTS 2)by geographical location: less developed regions, transition regions, more developed regionsby degree of urbanisation: (till 2012: densely/intermediate/sparsely populated areas; from 2012: densely/thinly populated area, intermediate density area)by genderby country of birth, country of citizenship (as of 2010, optional in 2010)by educational level: ISCED 1997 up to 2013 and ISCED 2011 from 2014 onwards.by occupation: manual, non-manual; ICT (coded by 2-digit ISCO categories)/non-ICT (optional: all 2-digit ISCO categories)by employment situationby age (in completed years and by groups)legal / de facto marital status (2011-2014, optional) Regional breakdowns (NUTS) are available only for a selection of indicators disseminated in the regional tables in Eurobase (Regional Information society statistics by NUTS regions (isoc_reg):Households with access to the internet at homeHouseholds with broadband accessIndividuals who have never used a computerIndividuals who used the internet, frequency of use and activitiesIndividuals who used the internet for interaction with public authoritiesIndividuals who ordered goods or services over the internet for private useIndividuals who accessed the internet away from home or work

The Digital Opportunity Index (DOI) is the only index that includes price data for 181 economies, which is vital in assessing effective market demand. The Digital Opportunity Index (DOI) has been designed to as a tool for tracking progress in bridging the digital divide and the implementa- tion of the outcomes of the World Summit on the Information Society (WSIS). As such, it provides a powerful policy tool for exploring the global and regional trends in infrastructure, opportu- nity and usage that are shaping the Information Society.

Data given in this domain are collected annually by the National Statistical Institutes and are based on Eurostat's annual model questionnaires on ICT (Information and Communication Technologies) usage in households and by individuals. Large part of the data collected are used in the context of the 2011 - 2015 benchmarking framework (endorsed by i2010 High Level Group in November 2009) for the Digital Agenda Scoreboard, Europe's strategy for a flourishing digital economy by 2020. This conceptual framework follows the i2010 Benchmarking Framework which itself followed-up the eEurope 2005 Action Plan. ICT usage data are also used in the Consumer Conditions Scoreboard (purchases over the Internet) and in the Employment Guidelines (e-skills of individuals). The aim of the European ICT surveys is the timely provision of statistics on individuals and households on the use of Information and Communication Technologies at European level. Data for this collection are supplied directly from the surveys with no separate treatment. Coverage: The characteristics to be provided are drawn from the following list of subjects:access to and use of ICTs by individuals and/or in households,use of the Internet and other electronic networks for different purposes by individuals and/or in households,ICT security and trust,ICT competence and skills,barriers to the use of ICT and the Internet,perceived effects of ICT usage on individuals and/or on households,use of ICT by individuals to exchange information and services with governments and public administrations (e-government),access to and use of technologies enabling connection to the Internet or other networks from anywhere at any time (ubiquitous connectivity). Breakdowns (see details of available breakdowns): Relating to households:by region of residence (NUTS 1, optional: NUTS 2)by geographical location: less developed regions, transition regions, more developed regionsby degree of urbanisation (till 2012: densely/intermediate/sparsely populated areas; from 2012: densely/thinly populated area, intermediate density area) by type of householdby households net monthly income (optional) Relating to individuals:by region of residence (NUTS1, optional: NUTS 2)by geographical location: less developed regions, transition regions, more developed regionsby degree of urbanisation: (till 2012: densely/intermediate/sparsely populated areas; from 2012: densely/thinly populated area, intermediate density area)by genderby country of birth, country of citizenship (as of 2010, optional in 2010)by educational level: ISCED 1997 up to 2013 and ISCED 2011 from 2014 onwards.by occupation: manual, non-manual; ICT (coded by 2-digit ISCO categories)/non-ICT (optional: all 2-digit ISCO categories)by employment situationby age (in completed years and by groups)legal / de facto marital status (2011-2014, optional) Regional breakdowns (NUTS) are available only for a selection of indicators disseminated in the regional tables in Eurobase (Regional Information society statistics by NUTS regions (isoc_reg):Households with access to the internet at homeHouseholds with broadband accessIndividuals who have never used a computerIndividuals who used the internet, frequency of use and activitiesIndividuals who used the internet for interaction with public authoritiesIndividuals who ordered goods or services over the internet for private useIndividuals who accessed the internet away from home or work

Eurostat uses as a base for its work the OECD Benchmark Definition of Foreign Direct Investment Third Edition, a detailed operational definition fully consistent with the IMF Balance of Payments Manual, Fifth Edition, BPM5. Foreign direct investment (FDI) is the category of international investment made by an entity resident in one economy (direct investor) to acquire a lasting interest in an enterprise operating in another economy (direct investment enterprise). The lasting interest is deemed to exist if the direct investor acquires at least 10% of the voting power of the direct investment enterprise. FDI statistics record separately: 1) Inward FDI (or FDI in the reporting economy), namely investment by foreigners in enterprises resident in the reporting economy. 2) Outward FDI (or FDIabroad), namely investment by residents entities in affiliated enterprises abroad. FDI statistics record both the initial investment and all subsequent investment made by the direct investor, either in the form of equity capital, or in the form of loans, or in the form of reinvesting earnings. Investment made through other affiliated enterprises of the same group of the direct investor should also be recorded according to the international methodology. There are three main indicators: FDI flows, stocks and income. The indicators described in more detail below are presented in the complete tables with a breakdown by partner country or region and a breakdown by the kind of activity in which FDI is made. In the table called "Main indicators" there is a reduced breakdown by partners and data for total activity only. See the part on classification system for more detail. See also the User's guideon the structure on the database and for practical information on data downloading. 1) FDI flows denote the new investment made during the period. FDI flows are recorded in the Balance of Payments financial account. Total FDI flows are broken down by kind of instrument used for making the investment: Equity capital comprises equity in branches, all shares in subsidiaries and associates (except non-participating, preferred shares that are treated as debt securities and are included under other FDI capital) and other contributions such as the provision of machinery. Reinvested earnings consist of the direct investor's share (in proportion to equity participation) of earnings not distributed by the direct investment enterprise. Reinvested earnings are an imputed transaction. Reinvested earnings are also recorded with opposite sign among FDI income (see below). This recording represents not distributed income as being earned by the direct investor and reinvested in the direct investment enterprise at the same time. Other FDI capital (loans) covers the borrowing and lending of funds, including debt securities and trade credits between direct investors and direct investment enterprises. Debt transactions between affiliated financial intermediaries recorded under direct investment flows are limited to permanent debt. 2) FDI stocks (or positions) denote the value of the investment at the end of the period. FDI stocks are recorded in the International Investment Position. Outward FDI stocks are recorded as assets of the reporting economy, inward FDI stocks as liabilities. Similarly with flows, FDI stocks are broken down by kind of instrument. However, there are only two categories instead of three: Equity capital and reinvested earnings is the value of the own capital of the enterprise, including the value of own reserves that are accumulated from past reinvested earnings. Reserves corresponding to reinvested earnings are not shown separately from other equity capital as in the case of flows. Other FDI capital is the stock of debts (assets or liabilities) between the direct investors and the direct investment enterprise. 3) FDI income is the income accruing to direct investors during the period. FDI income is recorded in the current account of the Balance of Payments. Total FDI income is broken down by kind of income. The categories of FDI income available are linked to the breakdown of FDI flows and stocks by kind of instrument, namely: Dividends Dividends payable in the period and branch profits remitted to the direct investor, gross of any withholding taxes. Dividends include payments due on common and preferred shares. Reinvested earnings See definition under FDI flows. Interest on loans Interest accrued in the period on loans (other FDI capital) with affiliated enterprises, gross of any withholding tax. 4) FDI intensity Out of FDI annual data, an indicator useful to measure EU market integration is also calculated and disseminated in the domain Structural Indicators: FDI intensity as % of GDP: Average of inward and outward FDI flows divided by GDP. A higher index indicates higher new FDI during the period in relation to the size of the economy as measured by GDP. If this index increases over time, then the country/zone is becoming more integrated with the international economy.

Eurostat uses as a base for its work the OECD Benchmark Definition of Foreign Direct Investment Third Edition, a detailed operational definition fully consistent with the IMF Balance of Payments Manual, Fifth Edition, BPM5. Foreign direct investment (FDI) is the category of international investment made by an entity resident in one economy (direct investor) to acquire a lasting interest in an enterprise operating in another economy (direct investment enterprise). The lasting interest is deemed to exist if the direct investor acquires at least 10% of the voting power of the direct investment enterprise. FDI statistics record separately: 1) Inward FDI (or FDI in the reporting economy), namely investment by foreigners in enterprises resident in the reporting economy. 2) Outward FDI (or FDIabroad), namely investment by residents entities in affiliated enterprises abroad. FDI statistics record both the initial investment and all subsequent investment made by the direct investor, either in the form of equity capital, or in the form of loans, or in the form of reinvesting earnings. Investment made through other affiliated enterprises of the same group of the direct investor should also be recorded according to the international methodology. There are three main indicators: FDI flows, stocks and income. The indicators described in more detail below are presented in the complete tables with a breakdown by partner country or region and a breakdown by the kind of activity in which FDI is made. In the table called "Main indicators" there is a reduced breakdown by partners and data for total activity only. See the part on classification system for more detail. See also the User's guideon the structure on the database and for practical information on data downloading. 1) FDI flows denote the new investment made during the period. FDI flows are recorded in the Balance of Payments financial account. Total FDI flows are broken down by kind of instrument used for making the investment: Equity capital comprises equity in branches, all shares in subsidiaries and associates (except non-participating, preferred shares that are treated as debt securities and are included under other FDI capital) and other contributions such as the provision of machinery. Reinvested earnings consist of the direct investor's share (in proportion to equity participation) of earnings not distributed by the direct investment enterprise. Reinvested earnings are an imputed transaction. Reinvested earnings are also recorded with opposite sign among FDI income (see below). This recording represents not distributed income as being earned by the direct investor and reinvested in the direct investment enterprise at the same time. Other FDI capital (loans) covers the borrowing and lending of funds, including debt securities and trade credits between direct investors and direct investment enterprises. Debt transactions between affiliated financial intermediaries recorded under direct investment flows are limited to permanent debt. 2) FDI stocks (or positions) denote the value of the investment at the end of the period. FDI stocks are recorded in the International Investment Position. Outward FDI stocks are recorded as assets of the reporting economy, inward FDI stocks as liabilities. Similarly with flows, FDI stocks are broken down by kind of instrument. However, there are only two categories instead of three: Equity capital and reinvested earnings is the value of the own capital of the enterprise, including the value of own reserves that are accumulated from past reinvested earnings. Reserves corresponding to reinvested earnings are not shown separately from other equity capital as in the case of flows. Other FDI capital is the stock of debts (assets or liabilities) between the direct investors and the direct investment enterprise. 3) FDI income is the income accruing to direct investors during the period. FDI income is recorded in the current account of the Balance of Payments. Total FDI income is broken down by kind of income. The categories of FDI income available are linked to the breakdown of FDI flows and stocks by kind of instrument, namely: Dividends Dividends payable in the period and branch profits remitted to the direct investor, gross of any withholding taxes. Dividends include payments due on common and preferred shares. Reinvested earnings See definition under FDI flows. Interest on loans Interest accrued in the period on loans (other FDI capital) with affiliated enterprises, gross of any withholding tax. 4) FDI intensity Out of FDI annual data, an indicator useful to measure EU market integration is also calculated and disseminated in the domain Structural Indicators: FDI intensity as % of GDP: Average of inward and outward FDI flows divided by GDP. A higher index indicates higher new FDI during the period in relation to the size of the economy as measured by GDP. If this index increases over time, then the country/zone is becoming more integrated with the international economy.

Eurostat uses as a base for its work the OECD Benchmark Definition of Foreign Direct Investment Third Edition, a detailed operational definition fully consistent with the IMF Balance of Payments Manual, Fifth Edition, BPM5. Foreign direct investment (FDI) is the category of international investment made by an entity resident in one economy (direct investor) to acquire a lasting interest in an enterprise operating in another economy (direct investment enterprise). The lasting interest is deemed to exist if the direct investor acquires at least 10% of the voting power of the direct investment enterprise. FDI statistics record separately: 1) Inward FDI (or FDI in the reporting economy), namely investment by foreigners in enterprises resident in the reporting economy. 2) Outward FDI (or FDIabroad), namely investment by residents entities in affiliated enterprises abroad. FDI statistics record both the initial investment and all subsequent investment made by the direct investor, either in the form of equity capital, or in the form of loans, or in the form of reinvesting earnings. Investment made through other affiliated enterprises of the same group of the direct investor should also be recorded according to the international methodology. There are three main indicators: FDI flows, stocks and income. The indicators described in more detail below are presented in the complete tables with a breakdown by partner country or region and a breakdown by the kind of activity in which FDI is made. In the table called "Main indicators" there is a reduced breakdown by partners and data for total activity only. See the part on classification system for more detail. See also the User's guideon the structure on the database and for practical information on data downloading. 1) FDI flows denote the new investment made during the period. FDI flows are recorded in the Balance of Payments financial account. Total FDI flows are broken down by kind of instrument used for making the investment: Equity capital comprises equity in branches, all shares in subsidiaries and associates (except non-participating, preferred shares that are treated as debt securities and are included under other FDI capital) and other contributions such as the provision of machinery. Reinvested earnings consist of the direct investor's share (in proportion to equity participation) of earnings not distributed by the direct investment enterprise. Reinvested earnings are an imputed transaction. Reinvested earnings are also recorded with opposite sign among FDI income (see below). This recording represents not distributed income as being earned by the direct investor and reinvested in the direct investment enterprise at the same time. Other FDI capital (loans) covers the borrowing and lending of funds, including debt securities and trade credits between direct investors and direct investment enterprises. Debt transactions between affiliated financial intermediaries recorded under direct investment flows are limited to permanent debt. 2) FDI stocks (or positions) denote the value of the investment at the end of the period. FDI stocks are recorded in the International Investment Position. Outward FDI stocks are recorded as assets of the reporting economy, inward FDI stocks as liabilities. Similarly with flows, FDI stocks are broken down by kind of instrument. However, there are only two categories instead of three: Equity capital and reinvested earnings is the value of the own capital of the enterprise, including the value of own reserves that are accumulated from past reinvested earnings. Reserves corresponding to reinvested earnings are not shown separately from other equity capital as in the case of flows. Other FDI capital is the stock of debts (assets or liabilities) between the direct investors and the direct investment enterprise. 3) FDI income is the income accruing to direct investors during the period. FDI income is recorded in the current account of the Balance of Payments. Total FDI income is broken down by kind of income. The categories of FDI income available are linked to the breakdown of FDI flows and stocks by kind of instrument, namely: Dividends Dividends payable in the period and branch profits remitted to the direct investor, gross of any withholding taxes. Dividends include payments due on common and preferred shares. Reinvested earnings See definition under FDI flows. Interest on loans Interest accrued in the period on loans (other FDI capital) with affiliated enterprises, gross of any withholding tax. 4) FDI intensity Out of FDI annual data, an indicator useful to measure EU market integration is also calculated and disseminated in the domain Structural Indicators: FDI intensity as % of GDP: Average of inward and outward FDI flows divided by GDP. A higher index indicates higher new FDI during the period in relation to the size of the economy as measured by GDP. If this index increases over time, then the country/zone is becoming more integrated with the international economy.

Eurostat uses as a base for its work the OECD Benchmark Definition of Foreign Direct Investment Third Edition, a detailed operational definition fully consistent with the IMF Balance of Payments Manual, Fifth Edition, BPM5. Foreign direct investment (FDI) is the category of international investment made by an entity resident in one economy (direct investor) to acquire a lasting interest in an enterprise operating in another economy (direct investment enterprise). The lasting interest is deemed to exist if the direct investor acquires at least 10% of the voting power of the direct investment enterprise. FDI statistics record separately: 1) Inward FDI (or FDI in the reporting economy), namely investment by foreigners in enterprises resident in the reporting economy. 2) Outward FDI (or FDIabroad), namely investment by residents entities in affiliated enterprises abroad. FDI statistics record both the initial investment and all subsequent investment made by the direct investor, either in the form of equity capital, or in the form of loans, or in the form of reinvesting earnings. Investment made through other affiliated enterprises of the same group of the direct investor should also be recorded according to the international methodology. There are three main indicators: FDI flows, stocks and income. The indicators described in more detail below are presented in the complete tables with a breakdown by partner country or region and a breakdown by the kind of activity in which FDI is made. In the table called "Main indicators" there is a reduced breakdown by partners and data for total activity only. See the part on classification system for more detail. See also the User's guideon the structure on the database and for practical information on data downloading. 1) FDI flows denote the new investment made during the period. FDI flows are recorded in the Balance of Payments financial account. Total FDI flows are broken down by kind of instrument used for making the investment: Equity capital comprises equity in branches, all shares in subsidiaries and associates (except non-participating, preferred shares that are treated as debt securities and are included under other FDI capital) and other contributions such as the provision of machinery. Reinvested earnings consist of the direct investor's share (in proportion to equity participation) of earnings not distributed by the direct investment enterprise. Reinvested earnings are an imputed transaction. Reinvested earnings are also recorded with opposite sign among FDI income (see below). This recording represents not distributed income as being earned by the direct investor and reinvested in the direct investment enterprise at the same time. Other FDI capital (loans) covers the borrowing and lending of funds, including debt securities and trade credits between direct investors and direct investment enterprises. Debt transactions between affiliated financial intermediaries recorded under direct investment flows are limited to permanent debt. 2) FDI stocks (or positions) denote the value of the investment at the end of the period. FDI stocks are recorded in the International Investment Position. Outward FDI stocks are recorded as assets of the reporting economy, inward FDI stocks as liabilities. Similarly with flows, FDI stocks are broken down by kind of instrument. However, there are only two categories instead of three: Equity capital and reinvested earnings is the value of the own capital of the enterprise, including the value of own reserves that are accumulated from past reinvested earnings. Reserves corresponding to reinvested earnings are not shown separately from other equity capital as in the case of flows. Other FDI capital is the stock of debts (assets or liabilities) between the direct investors and the direct investment enterprise. 3) FDI income is the income accruing to direct investors during the period. FDI income is recorded in the current account of the Balance of Payments. Total FDI income is broken down by kind of income. The categories of FDI income available are linked to the breakdown of FDI flows and stocks by kind of instrument, namely: Dividends Dividends payable in the period and branch profits remitted to the direct investor, gross of any withholding taxes. Dividends include payments due on common and preferred shares. Reinvested earnings See definition under FDI flows. Interest on loans Interest accrued in the period on loans (other FDI capital) with affiliated enterprises, gross of any withholding tax. 4) FDI intensity Out of FDI annual data, an indicator useful to measure EU market integration is also calculated and disseminated in the domain Structural Indicators: FDI intensity as % of GDP: Average of inward and outward FDI flows divided by GDP. A higher index indicates higher new FDI during the period in relation to the size of the economy as measured by GDP. If this index increases over time, then the country/zone is becoming more integrated with the international economy.

Eurostat uses as a base for its work the OECD Benchmark Definition of Foreign Direct Investment Third Edition, a detailed operational definition fully consistent with the IMF Balance of Payments Manual, Fifth Edition, BPM5. Foreign direct investment (FDI) is the category of international investment made by an entity resident in one economy (direct investor) to acquire a lasting interest in an enterprise operating in another economy (direct investment enterprise). The lasting interest is deemed to exist if the direct investor acquires at least 10% of the voting power of the direct investment enterprise. FDI statistics record separately: 1) Inward FDI (or FDI in the reporting economy), namely investment by foreigners in enterprises resident in the reporting economy. 2) Outward FDI (or FDIabroad), namely investment by residents entities in affiliated enterprises abroad. FDI statistics record both the initial investment and all subsequent investment made by the direct investor, either in the form of equity capital, or in the form of loans, or in the form of reinvesting earnings. Investment made through other affiliated enterprises of the same group of the direct investor should also be recorded according to the international methodology. There are three main indicators: FDI flows, stocks and income. The indicators described in more detail below are presented in the complete tables with a breakdown by partner country or region and a breakdown by the kind of activity in which FDI is made. In the table called "Main indicators" there is a reduced breakdown by partners and data for total activity only. See the part on classification system for more detail. See also the User's guideon the structure on the database and for practical information on data downloading. 1) FDI flows denote the new investment made during the period. FDI flows are recorded in the Balance of Payments financial account. Total FDI flows are broken down by kind of instrument used for making the investment: Equity capital comprises equity in branches, all shares in subsidiaries and associates (except non-participating, preferred shares that are treated as debt securities and are included under other FDI capital) and other contributions such as the provision of machinery. Reinvested earnings consist of the direct investor's share (in proportion to equity participation) of earnings not distributed by the direct investment enterprise. Reinvested earnings are an imputed transaction. Reinvested earnings are also recorded with opposite sign among FDI income (see below). This recording represents not distributed income as being earned by the direct investor and reinvested in the direct investment enterprise at the same time. Other FDI capital (loans) covers the borrowing and lending of funds, including debt securities and trade credits between direct investors and direct investment enterprises. Debt transactions between affiliated financial intermediaries recorded under direct investment flows are limited to permanent debt. 2) FDI stocks (or positions) denote the value of the investment at the end of the period. FDI stocks are recorded in the International Investment Position. Outward FDI stocks are recorded as assets of the reporting economy, inward FDI stocks as liabilities. Similarly with flows, FDI stocks are broken down by kind of instrument. However, there are only two categories instead of three: Equity capital and reinvested earnings is the value of the own capital of the enterprise, including the value of own reserves that are accumulated from past reinvested earnings. Reserves corresponding to reinvested earnings are not shown separately from other equity capital as in the case of flows. Other FDI capital is the stock of debts (assets or liabilities) between the direct investors and the direct investment enterprise. 3) FDI income is the income accruing to direct investors during the period. FDI income is recorded in the current account of the Balance of Payments. Total FDI income is broken down by kind of income. The categories of FDI income available are linked to the breakdown of FDI flows and stocks by kind of instrument, namely: Dividends Dividends payable in the period and branch profits remitted to the direct investor, gross of any withholding taxes. Dividends include payments due on common and preferred shares. Reinvested earnings See definition under FDI flows. Interest on loans Interest accrued in the period on loans (other FDI capital) with affiliated enterprises, gross of any withholding tax. 4) FDI intensity Out of FDI annual data, an indicator useful to measure EU market integration is also calculated and disseminated in the domain Structural Indicators: FDI intensity as % of GDP: Average of inward and outward FDI flows divided by GDP. A higher index indicates higher new FDI during the period in relation to the size of the economy as measured by GDP. If this index increases over time, then the country/zone is becoming more integrated with the international economy.

Eurostat uses as a base for its work the OECD Benchmark Definition of Foreign Direct Investment Third Edition, a detailed operational definition fully consistent with the IMF Balance of Payments Manual, Fifth Edition, BPM5. Foreign direct investment (FDI) is the category of international investment made by an entity resident in one economy (direct investor) to acquire a lasting interest in an enterprise operating in another economy (direct investment enterprise). The lasting interest is deemed to exist if the direct investor acquires at least 10% of the voting power of the direct investment enterprise. FDI statistics record separately: 1) Inward FDI (or FDI in the reporting economy), namely investment by foreigners in enterprises resident in the reporting economy. 2) Outward FDI (or FDIabroad), namely investment by residents entities in affiliated enterprises abroad. FDI statistics record both the initial investment and all subsequent investment made by the direct investor, either in the form of equity capital, or in the form of loans, or in the form of reinvesting earnings. Investment made through other affiliated enterprises of the same group of the direct investor should also be recorded according to the international methodology. There are three main indicators: FDI flows, stocks and income. The indicators described in more detail below are presented in the complete tables with a breakdown by partner country or region and a breakdown by the kind of activity in which FDI is made. In the table called "Main indicators" there is a reduced breakdown by partners and data for total activity only. See the part on classification system for more detail. See also the User's guideon the structure on the database and for practical information on data downloading. 1) FDI flows denote the new investment made during the period. FDI flows are recorded in the Balance of Payments financial account. Total FDI flows are broken down by kind of instrument used for making the investment: Equity capital comprises equity in branches, all shares in subsidiaries and associates (except non-participating, preferred shares that are treated as debt securities and are included under other FDI capital) and other contributions such as the provision of machinery. Reinvested earnings consist of the direct investor's share (in proportion to equity participation) of earnings not distributed by the direct investment enterprise. Reinvested earnings are an imputed transaction. Reinvested earnings are also recorded with opposite sign among FDI income (see below). This recording represents not distributed income as being earned by the direct investor and reinvested in the direct investment enterprise at the same time. Other FDI capital (loans) covers the borrowing and lending of funds, including debt securities and trade credits between direct investors and direct investment enterprises. Debt transactions between affiliated financial intermediaries recorded under direct investment flows are limited to permanent debt. 2) FDI stocks (or positions) denote the value of the investment at the end of the period. FDI stocks are recorded in the International Investment Position. Outward FDI stocks are recorded as assets of the reporting economy, inward FDI stocks as liabilities. Similarly with flows, FDI stocks are broken down by kind of instrument. However, there are only two categories instead of three: Equity capital and reinvested earnings is the value of the own capital of the enterprise, including the value of own reserves that are accumulated from past reinvested earnings. Reserves corresponding to reinvested earnings are not shown separately from other equity capital as in the case of flows. Other FDI capital is the stock of debts (assets or liabilities) between the direct investors and the direct investment enterprise. 3) FDI income is the income accruing to direct investors during the period. FDI income is recorded in the current account of the Balance of Payments. Total FDI income is broken down by kind of income. The categories of FDI income available are linked to the breakdown of FDI flows and stocks by kind of instrument, namely: Dividends Dividends payable in the period and branch profits remitted to the direct investor, gross of any withholding taxes. Dividends include payments due on common and preferred shares. Reinvested earnings See definition under FDI flows. Interest on loans Interest accrued in the period on loans (other FDI capital) with affiliated enterprises, gross of any withholding tax. 4) FDI intensity Out of FDI annual data, an indicator useful to measure EU market integration is also calculated and disseminated in the domain Structural Indicators: FDI intensity as % of GDP: Average of inward and outward FDI flows divided by GDP. A higher index indicates higher new FDI during the period in relation to the size of the economy as measured by GDP. If this index increases over time, then the country/zone is becoming more integrated with the international economy.

Data on marriages and divorces at national level are based on the annual demographic data collections in the field of demography carried out by Eurostat. The completeness of information depends on the availability of data reported by the National Statistical Institutes. The Joint demographic data collection is carried out in cooperation with United Nation Statistical Division (UNSD) in the summer of each year, having the deadline 15 September. During this data collection Eurostat collects from the national statistical institutes detailed data by sex, age and other characteristics for the demographic events (births, deaths, marriages and divorces) of the previous year and the population on 1 January of the current and previous years. More specifically, during year T the following data are collected and disseminated on fertility field: - total number of marriages and divorces - persons getting married during the reference year by previous legal marital status, year T-1 Data can be found under the section Marriages and divorces (demo_nup). The information is updated towards the end of each year based on information collected during the Joint data collection. Moreover, any update sent by the countries in-between data collections are validated, processed and uploaded into Eurostat's demographic database and in Eurostat's free dissemination online database as soon as possible. Aggregates are recalculated accordingly. The data transmitted by the National Statistical Institutes are validated by Eurostat, processed and uploaded into Eurostat's Demographic Database and in Eurostat's free dissemination online database. The data are also disseminated in several thematic and horizontal Eurostat's publications. Data are presented by single country and for aggregates of countries. For EU and Euro Area, only the current and the previous version of the aggregates are published. The currently disseminated aggregates are: EU-27, EU-25, EA-16, and EA-15. Moreover, data is disseminated for the European Economic Area (EEA) and the European Free Trade Association (EFTA). International marriages and divorces Statistics on the number of international marriages and divorces (2000-2007) were collected by Eurostat from national statistical institutes in September 2008. The data were further used by the European Commission for preparing  a proposal for a Council Regulation on the law applicable in divorce and legal separation.  These data collected are available upon request.

Data on marriages and divorces at national level are based on the annual demographic data collections in the field of demography carried out by Eurostat. The completeness of information depends on the availability of data reported by the National Statistical Institutes. The Joint demographic data collection is carried out in cooperation with United Nation Statistical Division (UNSD) in the summer of each year, having the deadline 15 September. During this data collection Eurostat collects from the national statistical institutes detailed data by sex, age and other characteristics for the demographic events (births, deaths, marriages and divorces) of the previous year and the population on 1 January of the current and previous years. More specifically, during year T the following data are collected and disseminated on fertility field: - total number of marriages and divorces - persons getting married during the reference year by previous legal marital status, year T-1 Data can be found under the section Marriages and divorces (demo_nup). The information is updated towards the end of each year based on information collected during the Joint data collection. Moreover, any update sent by the countries in-between data collections are validated, processed and uploaded into Eurostat's demographic database and in Eurostat's free dissemination online database as soon as possible. Aggregates are recalculated accordingly. The data transmitted by the National Statistical Institutes are validated by Eurostat, processed and uploaded into Eurostat's Demographic Database and in Eurostat's free dissemination online database. The data are also disseminated in several thematic and horizontal Eurostat's publications. Data are presented by single country and for aggregates of countries. For EU and Euro Area, only the current and the previous version of the aggregates are published. The currently disseminated aggregates are: EU-27, EU-25, EA-16, and EA-15. Moreover, data is disseminated for the European Economic Area (EEA) and the European Free Trade Association (EFTA). International marriages and divorces Statistics on the number of international marriages and divorces (2000-2007) were collected by Eurostat from national statistical institutes in September 2008. The data were further used by the European Commission for preparing  a proposal for a Council Regulation on the law applicable in divorce and legal separation.  These data collected are available upon request.

IHME research, published in the Lancet in 2008. The study, Tracking progress towards universal childhood immunizations and the impact of global initiatives, provides estimates with confidence intervals of the coverage of three-dose diphtheria, tetanus, and pertussis (DTP3) vaccination. The estimates take into account all publicly available data, including data from routine reporting systems and nationally representative surveys.

Education Statistics provides data on over 1,000 internationally comparable indicators for access, progression, completion, learning outcomes, literacy, teachers, expenditure, and background indicators. The indicators cover the educational cycle from pre-primary to tertiary education.

20.1. Source data

This consumption stands for final energy consumption. This means that the consumption in industry covers all industrial sectors with the exception of the energy sector, like power stations, oil refineries, coke ovens and all other installations transforming energy products into another form. Final energy consumption in transport covers mainly the consumption by railways and electrified urban transport systems. Final energy consumption in households/services covers quantities consumed by private households, small-scale industry, crafts, commerce, administrative bodies, services with the exception of transportation, agriculture and fishing.

NEW METHODOLOGY (from 2007 onwards) Average half-yearly electricity prices for households and industrial end-users. The end-users are characterised by predefined annual consumption bands. The prices are collected and published considering three levels of taxation prices excluding taxes and levies;prices excluding VAT and other recoverable taxes;prices including all taxes, levies and VAT.  For the disaggregated electricity prices, separate price components are available for households and industrial consumers for production costs of electricitynetwork coststaxes and leviesOLD METHODOLOGY (until 2007) Electricity prices for households and industrial standard consumers, valid on 1st January and on 1st July of each calendar year. Standard consumers are characterised by predefined annual consumption. The prices include electricity/basic price, transmission, system services, meter rental, distribution and other services. The prices are collected and published considering three levels of taxation (see above). For structural indicators tables, where only annual data is displayed both for new and old methodology in the same table, the prices refer to the price on 1st January of each year (until 2007) and to the first semester of each year (2008 and later). Data on electricity prices for industrial consumers are collected according to Directive 2008/92/EC of the European Parliament and of the Council of 22 October 2008 concerning a Community procedure to improve the transparency of gas and electricity prices charged to industrial end-users (recast) (Text with EEA relevance). Data for electricity prices for household end-users are collected on a voluntary basis The data collection covers the full spectrum of the 28 Member States of the European Union, Candidate Countries, Potential candidate countries and EFTA countries (except Switzerland).

NEW METHODOLOGY (from 2007 onwards) Average half-yearly electricity prices for households and industrial end-users. The end-users are characterised by predefined annual consumption bands. The prices are collected and published considering three levels of taxation prices excluding taxes and levies;prices excluding VAT and other recoverable taxes;prices including all taxes, levies and VAT.  For the disaggregated electricity prices, separate price components are available for households and industrial consumers for production costs of electricitynetwork coststaxes and leviesOLD METHODOLOGY (until 2007) Electricity prices for households and industrial standard consumers, valid on 1st January and on 1st July of each calendar year. Standard consumers are characterised by predefined annual consumption. The prices include electricity/basic price, transmission, system services, meter rental, distribution and other services. The prices are collected and published considering three levels of taxation (see above). For structural indicators tables, where only annual data is displayed both for new and old methodology in the same table, the prices refer to the price on 1st January of each year (until 2007) and to the first semester of each year (2008 and later). Data on electricity prices for industrial consumers are collected according to Directive 2008/92/EC of the European Parliament and of the Council of 22 October 2008 concerning a Community procedure to improve the transparency of gas and electricity prices charged to industrial end-users (recast) (Text with EEA relevance). Data for electricity prices for household end-users are collected on a voluntary basis The data collection covers the full spectrum of the 28 Member States of the European Union, Candidate Countries, Potential candidate countries and EFTA countries (except Switzerland).

NEW METHODOLOGY (from 2007 onwards) Average half-yearly electricity prices for households and industrial end-users. The end-users are characterised by predefined annual consumption bands. The prices are collected and published considering three levels of taxation prices excluding taxes and levies;prices excluding VAT and other recoverable taxes;prices including all taxes, levies and VAT.  For the disaggregated electricity prices, separate price components are available for households and industrial consumers for production costs of electricitynetwork coststaxes and leviesOLD METHODOLOGY (until 2007) Electricity prices for households and industrial standard consumers, valid on 1st January and on 1st July of each calendar year. Standard consumers are characterised by predefined annual consumption. The prices include electricity/basic price, transmission, system services, meter rental, distribution and other services. The prices are collected and published considering three levels of taxation (see above). For structural indicators tables, where only annual data is displayed both for new and old methodology in the same table, the prices refer to the price on 1st January of each year (until 2007) and to the first semester of each year (2008 and later). Data on electricity prices for industrial consumers are collected according to Directive 2008/92/EC of the European Parliament and of the Council of 22 October 2008 concerning a Community procedure to improve the transparency of gas and electricity prices charged to industrial end-users (recast) (Text with EEA relevance). Data for electricity prices for household end-users are collected on a voluntary basis The data collection covers the full spectrum of the 28 Member States of the European Union, Candidate Countries, Potential candidate countries and EFTA countries (except Switzerland).

Eurostat Dataset Id:ei_isen_m Industry, Trade and Services statistics are part of Short-term statistics (STS), they give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification(Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are presented in the following forms: :Unadjusted :Working-day adjusted (Production, Turnover in wholesale and retail trade and other services, Hours worked) :Seasonally-adjusted Data are accessible as monthly and quarterly data. This heading covers the indicators listed below in four different sectors. INDUSTRY Production IndexTurnover Index Producer Prices (Domestic Output Prices index) Import Prices Index: Total, Euro area market, Non euro area market (euro area countries only) Labour Input Indicators: Number of Persons Employed, Hours Worked, Gross Wages and Salaries CONSTRUCTION Production Index: Total of the construction sector, Building construction, Civil Engineering Labour input indicators: Number of Persons Employed, Hours Worked, Gross Wages and Salaries Construction costs Index Building permits indicators: Number of dwellings WHOLESALE AND RETAIL TRADE Volume of sales (deflated turnover) Turnover (in value) Labour input indicators: Number of Persons Employed SERVICES Turnover Index

20.1. Source data

20.1. Source data

20.1. Source data

20.1. Source data

This dataset covers the indicator for monitoring progress towards energy efficiency targets of Europe 2020 strategy implemented by Directive 2012/27/EU on energy efficiency. Annual data collection cover in principle the 28 Member States of the European Union. Time series starts in year 1990.

The reliability and availability of infrastructure and the provision of utility services is crucial for development. The quality of infrastructure is measured by indicators assessing the wait times to obtain selected utility services, as well as the disruption of these services. The thirteen indicators measure the reliability and provision of infrastructure services in 144 countries. In addition, the estimated cost burden due to the inadequate provision of electricity is provided.

The Enterprise Surveys use standard survey instruments to collect firm-level data on the business environment from business owners and top managers. The surveys cover a broad range of topics including access to finance, corruption, infrastructure, crime, competition, labor, obstacles to growth, and performance measures.The full, firm-level data are available to researchers and include answers from all the survey questions- both global questions as well as country-specific questions. Note that the survey data results presented on the website are primarily in the form of indicators, i.e. firm-level data has been aggregated to the country level.

1: Most surveys were administered using the Enterprise Surveys Global Methodology as outlined in the Methodology page, while some others did not strictly adhere to the Enterprise Surveys Global Methodology. For example, for surveys which do not follow the Global Methodology, the Universe under consideration may have consisted of only manufacturing firms or the questionnaire used may have been different from the standard global questionnaire. Data users should exercise caution when comparing raw data and point estimates between surveys that did and did not adhere to the Enterprise Surveys Global Methodology. For surveys which did not adhere to the Global Methodology plus Afghanistan 2008, any inference from one of these surveys is representative only for the data sample itself. 2: Regional and "all countries" averages of indicators are computed by taking a simple average of country-level point estimates. For each economy, only the latest available year of survey data is used in this computation. Only surveys, posted during the years 2009-2015, and adhering to the Enterprise Surveys Global Methodology are used to compute these regional and "all countries" averages. 3: Descriptions of firm subgroup levels, e.g. how the ex post groupings are constructed, are provided in the Indicator Descriptions (PDF, 710KB) document. 4: Statistics derived from less than or equal to five firms are displayed with an "n.a." to maintain confidentiality and should be distinguished from ".." which indicates missing values. Also note for three growth-related indicators under the "Performance" topic, these indicators are not computed when they are derived from less than 30 firms. 5: Standard errors are labeled "n.c.", meaning not computed, for the following:    1) indicators for all surveys that were not conducted using the Enterprise Surveys Global Methodology and    2) for indicator breakdowns by ex post groupings: exporter or ownership type, and gender of the top manager.

UNSD Environmental Indicators disseminate global environment statistics on ten indicator themes compiled from a wide range of data sources. The themes and indicator tables were selected based on the current demands for international environmental statistics and the availability of internationally comparable data. Statistics on Water and Waste are based on official statistics supplied by national statistical offices and/or ministries of environment (or equivalent institutions) in response to the biennial UNSD/UNEP Questionnaire on Environment Statistics, complemented with comparable statistics from OECD and Eurostat, and water resources data from FAO Aquastat. Statistics on other themes were compiled by UNSD from other international sources. In a few cases, UNSD has made some calculations in order to derive the indicators. However, generally no adjustments have been made to the values received from the source. UNSD is not responsible for the quality, completeness/availability, and validity of the data. Environment statistics is still in an early stage of development in many countries, and data are often sparse. The indicators selected here are those of relatively good quality and geographic coverage. Information on data quality and comparability is given at the end of each table together with other important metadata.

The Environmental Performance Index (EPI) is constructed through the calculation and aggregation of 20 indicators reflecting national-level environmental data. These indicators are combined into nine issue categories, each of which fit under one of two overarching objectives. The two objectives that provide the overarching structure of the EPI are Environmental Health and Ecosystem Vitality. Environmental Health measures the protection of human health from environmental harm. Ecosystem Vitality measures ecosystem protection and resource management. These two objectives are further divided into nine issue categories that span high-priority environmental policy issues, including air quality, forests, fisheries, and climate and energy, among others. The issue categories are extensive but not comprehensive. Underlying the nine issue categories are 20 indicators calculated from country-level data and statistics. After more than 15 years of work on environmental performance measurement and six iterations of the EPI, global data are still lacking on a number of key environmental issues. These include: freshwater quality, toxic chemical exposures, municipal solid waste management, nuclear safety, wetlands loss, agricultural soil quality and degradation, recycling rates, adaptation, vulnerability, and resiliency to climate change, desertification.

The Trade Costs Dataset provides estimates of bilateral trade costs in agriculture and manufactured goods for the 1995-2011 period. It is built on trade and production data collected in 182 countries. Symmetric bilateral trade costs are computed using the Inverse Gravity Framework (Novy 2009), which estimates trade costs for each country pair using bilateral trade and gross national output.

Animal production statistics cover three main sub-domains based on three pieces of relevant legislation and related gentlemen’s agreements. Livestock and meat statistics are collected under Regulation (EC) No 1165/2008. They cover meat production, as activity of slaughterhouses (monthly) and as other slaughtering (annual), meat production (gross indigenous production) forecast (semi-annual or quarterly), livestock statistics, including regional statistics. A quality report is also collected every third year.Milk and milk product statistics are collected under Decision 97/80/EC implementing Directive 96/16/EC. They cover farm production and utilisation of milk (annual), collection (monthly for cows’ milk) and production activity by dairies (annual) and statistics on the structure of dairies (every third year). An annual methodological report is also collected.Statistics on eggs for hatching and farmyard poultry chicks are collected under Regulation (EC) No 617/2008, implementing Regulation (EC) No 1234/2007 (Single CMO Regulation). They cover statistics on the structure (annual) and the activity (monthly) of hatcheries as well as reports on the external trade of chicks. European Economic Area countries (EEA, Iceland, Liechtenstein and Norway) are requested to provide milk statistics, with the exception of those related to home consumption, as stated in Annex XXI of the EEA Agreement. As Iceland is now a candidate country and Liechtenstein is exempted in the Agreement, only Norway is concerned. The Agreement between the European Community and the Swiss Confederation on cooperation in the field of statistics states that Switzerland must provide Eurostat with national milk statistics. It has been amended in 2013 for covering also some livestock and meat statistics. The same statistics are requested from the candidate countries as acquis communautaire. Further data about the same topics refer to repealed legal acts or agreements. The tables on animal product supply balance sheets (apro_mk_bal, apro_mt_bal and apro_ec_bal), statistics on the structure of rearing (apro_mt_str) and the number of laying hens (apro_ec_lshen) are therefore no longer updated. The same applies to some variables (external trade of animals and meat), periods (surveys in April or August) or items (number of horses) included in other tables. The statistical tables disseminated by Eurostat are organised into three groups of tables on Agricultural products (apro), i.e. Milk and milk products (apro_mk), Livestock and meat (apro_mt) and Poultry farming (apro_ec). This last label covers statistics on hatcheries and on trade in chicks. The regional animal production statistics collected on livestock (agr_r_animal) and on cows’ milk production on farms (agr_r_milk_pr) are disseminated separately. Due to the change in the legal basis or in the methodology, the time series may be broken. This is indicated by a flag in the tables. The detailed content of each table and the reference to its legal definition is provided in the table below. Table 3.1: Data tables disseminated regarding animal production statistics

This report covers a wide range of subjects: the economic situation in agriculture, structures, trade, markets, financial aspects and rural development. An introductory chapter gives an overview of the 2012 agricultural year.

Eurostat uses as a base for its work the OECD Benchmark Definition of Foreign Direct Investment Third Edition, a detailed operational definition fully consistent with the IMF Balance of Payments Manual, Fifth Edition, BPM5. Foreign direct investment (FDI) is the category of international investment made by an entity resident in one economy (direct investor) to acquire a lasting interest in an enterprise operating in another economy (direct investment enterprise). The lasting interest is deemed to exist if the direct investor acquires at least 10% of the voting power of the direct investment enterprise. FDI statistics record separately: 1) Inward FDI (or FDI in the reporting economy), namely investment by foreigners in enterprises resident in the reporting economy. 2) Outward FDI (or FDIabroad), namely investment by residents entities in affiliated enterprises abroad. FDI statistics record both the initial investment and all subsequent investment made by the direct investor, either in the form of equity capital, or in the form of loans, or in the form of reinvesting earnings. Investment made through other affiliated enterprises of the same group of the direct investor should also be recorded according to the international methodology. There are three main indicators: FDI flows, stocks and income. The indicators described in more detail below are presented in the complete tables with a breakdown by partner country or region and a breakdown by the kind of activity in which FDI is made. In the table called "Main indicators" there is a reduced breakdown by partners and data for total activity only. See the part on classification system for more detail. See also the User's guideon the structure on the database and for practical information on data downloading. 1) FDI flows denote the new investment made during the period. FDI flows are recorded in the Balance of Payments financial account. Total FDI flows are broken down by kind of instrument used for making the investment: Equity capital comprises equity in branches, all shares in subsidiaries and associates (except non-participating, preferred shares that are treated as debt securities and are included under other FDI capital) and other contributions such as the provision of machinery. Reinvested earnings consist of the direct investor's share (in proportion to equity participation) of earnings not distributed by the direct investment enterprise. Reinvested earnings are an imputed transaction. Reinvested earnings are also recorded with opposite sign among FDI income (see below). This recording represents not distributed income as being earned by the direct investor and reinvested in the direct investment enterprise at the same time. Other FDI capital (loans) covers the borrowing and lending of funds, including debt securities and trade credits between direct investors and direct investment enterprises. Debt transactions between affiliated financial intermediaries recorded under direct investment flows are limited to permanent debt. 2) FDI stocks (or positions) denote the value of the investment at the end of the period. FDI stocks are recorded in the International Investment Position. Outward FDI stocks are recorded as assets of the reporting economy, inward FDI stocks as liabilities. Similarly with flows, FDI stocks are broken down by kind of instrument. However, there are only two categories instead of three: Equity capital and reinvested earnings is the value of the own capital of the enterprise, including the value of own reserves that are accumulated from past reinvested earnings. Reserves corresponding to reinvested earnings are not shown separately from other equity capital as in the case of flows. Other FDI capital is the stock of debts (assets or liabilities) between the direct investors and the direct investment enterprise. 3) FDI income is the income accruing to direct investors during the period. FDI income is recorded in the current account of the Balance of Payments. Total FDI income is broken down by kind of income. The categories of FDI income available are linked to the breakdown of FDI flows and stocks by kind of instrument, namely: Dividends Dividends payable in the period and branch profits remitted to the direct investor, gross of any withholding taxes. Dividends include payments due on common and preferred shares. Reinvested earnings See definition under FDI flows. Interest on loans Interest accrued in the period on loans (other FDI capital) with affiliated enterprises, gross of any withholding tax. 4) FDI intensity Out of FDI annual data, an indicator useful to measure EU market integration is also calculated and disseminated in the domain Structural Indicators: FDI intensity as % of GDP: Average of inward and outward FDI flows divided by GDP. A higher index indicates higher new FDI during the period in relation to the size of the economy as measured by GDP. If this index increases over time, then the country/zone is becoming more integrated with the international economy.

The Balance of Payments (BOP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of an economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, primary and secondary income), as well as on transactions which fall in the capital and the financial account. International investment position presents value of financial assets owned outside the economy and indebtedness of the economy to the rest of the world. BOP is an important macro-economic indicator used to assess the position of an economy (of credit or debit for current and capital acount, net acquisition of financial assets or net incurrence of liabilities for BOP financial account and international investment position) towards the external world. Out of BOP data, some indicators on international position of the EU and Member States are derived. Indicators on Main Balance of Payments and International Investment Position items as share of GDP are presented as percentage of GDP for given year or quarter and moving average for 3 consecutive years for:balance, credit and debit flows of current and capital accounts and of main current account  items: goods, services, primary and secondary income,net flows, net acquisition of financial assets and net incurrence of liabilities for total financial account and foreign direct investment, international investment position and net external debt at the end of reference quarter or year.   Indicators on export market shares present shares of each EU Member State in total world exports of goods and services for given year, and 1-year and 5-year percentage changes of these shares, as well as shares in OECD exports and 5-year percentage changes of these shares.

Eurostat Dataset Id:bop_fdi_pos_r2 Eurostat uses as a base for its work the OECD Benchmark Definition of Foreign Direct Investment Third Edition, a detailed operational definition fully consistent with the IMF Balance of Payments Manual, Fifth Edition, BPM5. Foreign direct investment (FDI) is the category of international investment made by an entity resident in one economy (direct investor) to acquire a lasting interest in an enterprise operating in another economy (direct investment enterprise). The lasting interest is deemed to exist if the direct investor acquires at least 10% of the voting power of the direct investment enterprise. FDI statistics record separately: 1) Inward FDI (or FDI in the reporting economy), namely investment by foreigners in enterprises resident in the reporting economy. 2) Outward FDI (or FDI abroad), namely investment by residents entities in affiliated enterprises abroad. FDI statistics record both the initial investment and all subsequent investment made by the direct investor, either in the form of equity capital, or in the form of loans, or in the form of reinvesting earnings. Investment made through other affiliated enterprises of the same group of the direct investor should also be recorded according to the international methodology. There are three main indicators: FDI flows, stocks and income. The indicators described in more detail below are presented in the complete tables with a breakdown by partner country or region and a breakdown by the kind of activity in which FDI is made. In the table called "Main indicators" there is a reduced breakdown by partners and data for total activity only. See the part on classification system for more detail. See also the User's guideon the structure on the database and for practical information on data downloading. 1) FDI flows denote the new investment made during the period. FDI flows are recorded in the Balance of Payments financial account. Total FDI flows are broken down by kind of instrument used for making the investment:Equity capital comprises equity in branches, all shares in subsidiaries and associates (except non-participating, preferred shares that are treated as debt securities and are included under other FDI capital) and other contributions such as the provision of machinery.Reinvested earnings consist of the direct investor's share (in proportion to equity participation) of earnings not distributed by the direct investment enterprise. Reinvested earnings are an imputed transaction. Reinvested earnings are also recorded with opposite sign among FDI income (see below). This recording represents not distributed income as being earned by the direct investor and reinvested in the direct investment enterprise at the same time.Other FDI capital (loans) covers the borrowing and lending of funds, including debt securities and trade credits between direct investors and direct investment enterprises. Debt transactions between affiliated financial intermediaries recorded under direct investment flows are limited to permanent debt. 2) FDI stocks (or positions) denote the value of the investment at the end of the period. FDI stocks are recorded in the International Investment Position. Outward FDI stocks are recorded as assets of the reporting economy, inward FDI stocks as liabilities. Similarly with flows, FDI stocks are broken down by kind of instrument. However, there are only two categories instead of three:Equity capital and reinvested earnings is the value of the own capital of the enterprise, including the value of own reserves that are accumulated from past reinvested earnings. Reserves corresponding to reinvested earnings are not shown separately from other equity capital as in the case of flows.Other FDI capital is the stock of debts (assets or liabilities) between the direct investors and the direct investment enterprise. 3) FDI income is the income accruing to direct investors during the period. FDI income is recorded in the current account of the Balance of Payments. Total FDI income is broken down by kind of income. The categories of FDI income available are linked to the breakdown of FDI flows and stocks by kind of instrument, namely:Dividends Dividends payable in the period and branch profits remitted to the direct investor, gross of any withholding taxes. Dividends include payments due on common and preferred shares.Reinvested earnings See definition under FDI flows.Interest on loans Interest accrued in the period on loans (other FDI capital) with affiliated enterprises, gross of any withholding tax. 4) FDI intensity Out of FDI annual data, an indicator useful to measure EU market integration is also calculated and disseminated in the domain Structural Indicators:FDI intensity as % of GDP: Average of inward and outward FDI flows divided by GDP. A higher index indicates higher new FDI during the period in relation to the size of the economy as measured by GDP. If this index increases over time, then the country/zone is becoming more integrated with the international economy.

Eurostat uses as a base for its work the OECD Benchmark Definition of Foreign Direct Investment Third Edition, a detailed operational definition fully consistent with the IMF Balance of Payments Manual, Fifth Edition, BPM5. Foreign direct investment (FDI) is the category of international investment made by an entity resident in one economy (direct investor) to acquire a lasting interest in an enterprise operating in another economy (direct investment enterprise). The lasting interest is deemed to exist if the direct investor acquires at least 10% of the voting power of the direct investment enterprise. FDI statistics record separately: 1) Inward FDI (or FDI in the reporting economy), namely investment by foreigners in enterprises resident in the reporting economy. 2) Outward FDI (or FDIabroad), namely investment by residents entities in affiliated enterprises abroad. FDI statistics record both the initial investment and all subsequent investment made by the direct investor, either in the form of equity capital, or in the form of loans, or in the form of reinvesting earnings. Investment made through other affiliated enterprises of the same group of the direct investor should also be recorded according to the international methodology. There are three main indicators: FDI flows, stocks and income. The indicators described in more detail below are presented in the complete tables with a breakdown by partner country or region and a breakdown by the kind of activity in which FDI is made. In the table called "Main indicators" there is a reduced breakdown by partners and data for total activity only. See the part on classification system for more detail. See also the User's guideon the structure on the database and for practical information on data downloading. 1) FDI flows denote the new investment made during the period. FDI flows are recorded in the Balance of Payments financial account. Total FDI flows are broken down by kind of instrument used for making the investment:Equity capital comprises equity in branches, all shares in subsidiaries and associates (except non-participating, preferred shares that are treated as debt securities and are included under other FDI capital) and other contributions such as the provision of machinery.Reinvested earnings consist of the direct investor's share (in proportion to equity participation) of earnings not distributed by the direct investment enterprise. Reinvested earnings are an imputed transaction. Reinvested earnings are also recorded with opposite sign among FDI income (see below). This recording represents not distributed income as being earned by the direct investor and reinvested in the direct investment enterprise at the same time.Other FDI capital (loans) covers the borrowing and lending of funds, including debt securities and trade credits between direct investors and direct investment enterprises. Debt transactions between affiliated financial intermediaries recorded under direct investment flows are limited to permanent debt. 2) FDI stocks (or positions) denote the value of the investment at the end of the period. FDI stocks are recorded in the International Investment Position. Outward FDI stocks are recorded as assets of the reporting economy, inward FDI stocks as liabilities. Similarly with flows, FDI stocks are broken down by kind of instrument. However, there are only two categories instead of three:Equity capital and reinvested earnings is the value of the own capital of the enterprise, including the value of own reserves that are accumulated from past reinvested earnings. Reserves corresponding to reinvested earnings are not shown separately from other equity capital as in the case of flows.Other FDI capital is the stock of debts (assets or liabilities) between the direct investors and the direct investment enterprise. 3) FDI income is the income accruing to direct investors during the period. FDI income is recorded in the current account of the Balance of Payments. Total FDI income is broken down by kind of income. The categories of FDI income available are linked to the breakdown of FDI flows and stocks by kind of instrument, namely:Dividends Dividends payable in the period and branch profits remitted to the direct investor, gross of any withholding taxes. Dividends include payments due on common and preferred shares.Reinvested earnings See definition under FDI flows.Interest on loans Interest accrued in the period on loans (other FDI capital) with affiliated enterprises, gross of any withholding tax. 4) FDI intensity Out of FDI annual data, an indicator useful to measure EU market integration is also calculated and disseminated in the domain Structural Indicators:FDI intensity as % of GDP: Average of inward and outward FDI flows divided by GDP. A higher index indicates higher new FDI during the period in relation to the size of the economy as measured by GDP. If this index increases over time, then the country/zone is becoming more integrated with the international economy.

Eurostat uses as a base for its work the OECD Benchmark Definition of Foreign Direct Investment Third Edition, a detailed operational definition fully consistent with the IMF Balance of Payments Manual, Fifth Edition, BPM5. Foreign direct investment (FDI) is the category of international investment made by an entity resident in one economy (direct investor) to acquire a lasting interest in an enterprise operating in another economy (direct investment enterprise). The lasting interest is deemed to exist if the direct investor acquires at least 10% of the voting power of the direct investment enterprise. FDI statistics record separately: 1) Inward FDI (or FDI in the reporting economy), namely investment by foreigners in enterprises resident in the reporting economy. 2) Outward FDI (or FDIabroad), namely investment by residents entities in affiliated enterprises abroad. FDI statistics record both the initial investment and all subsequent investment made by the direct investor, either in the form of equity capital, or in the form of loans, or in the form of reinvesting earnings. Investment made through other affiliated enterprises of the same group of the direct investor should also be recorded according to the international methodology. There are three main indicators: FDI flows, stocks and income. The indicators described in more detail below are presented in the complete tables with a breakdown by partner country or region and a breakdown by the kind of activity in which FDI is made. In the table called "Main indicators" there is a reduced breakdown by partners and data for total activity only. See the part on classification system for more detail. See also the User's guideon the structure on the database and for practical information on data downloading. 1) FDI flows denote the new investment made during the period. FDI flows are recorded in the Balance of Payments financial account. Total FDI flows are broken down by kind of instrument used for making the investment:Equity capital comprises equity in branches, all shares in subsidiaries and associates (except non-participating, preferred shares that are treated as debt securities and are included under other FDI capital) and other contributions such as the provision of machinery.Reinvested earnings consist of the direct investor's share (in proportion to equity participation) of earnings not distributed by the direct investment enterprise. Reinvested earnings are an imputed transaction. Reinvested earnings are also recorded with opposite sign among FDI income (see below). This recording represents not distributed income as being earned by the direct investor and reinvested in the direct investment enterprise at the same time.Other FDI capital (loans) covers the borrowing and lending of funds, including debt securities and trade credits between direct investors and direct investment enterprises. Debt transactions between affiliated financial intermediaries recorded under direct investment flows are limited to permanent debt. 2) FDI stocks (or positions) denote the value of the investment at the end of the period. FDI stocks are recorded in the International Investment Position. Outward FDI stocks are recorded as assets of the reporting economy, inward FDI stocks as liabilities. Similarly with flows, FDI stocks are broken down by kind of instrument. However, there are only two categories instead of three:Equity capital and reinvested earnings is the value of the own capital of the enterprise, including the value of own reserves that are accumulated from past reinvested earnings. Reserves corresponding to reinvested earnings are not shown separately from other equity capital as in the case of flows.Other FDI capital is the stock of debts (assets or liabilities) between the direct investors and the direct investment enterprise. 3) FDI income is the income accruing to direct investors during the period. FDI income is recorded in the current account of the Balance of Payments. Total FDI income is broken down by kind of income. The categories of FDI income available are linked to the breakdown of FDI flows and stocks by kind of instrument, namely:Dividends Dividends payable in the period and branch profits remitted to the direct investor, gross of any withholding taxes. Dividends include payments due on common and preferred shares.Reinvested earnings See definition under FDI flows.Interest on loans Interest accrued in the period on loans (other FDI capital) with affiliated enterprises, gross of any withholding tax. 4) FDI intensity Out of FDI annual data, an indicator useful to measure EU market integration is also calculated and disseminated in the domain Structural Indicators:FDI intensity as % of GDP: Average of inward and outward FDI flows divided by GDP. A higher index indicates higher new FDI during the period in relation to the size of the economy as measured by GDP. If this index increases over time, then the country/zone is becoming more integrated with the international economy.

This dataset contains the exchange rate of 1USD to their country local currency.

Recent exchange rate movements have been unusually large, triggering a debate regarding their likely effects on trade. Historical experience in advanced and emerging market and developing economies suggests that exchange rate movements typically have sizable effects on export and import volumes. A 10 percent real effective depreciation in an economy’s currency is associated with a rise in real net exports of, on average, 1.5 percent of GDP, with substantial cross-country variation around this average. Although these effects fully materialize over a number of years, much of the adjustment occurs in the first year. The boost to exports associated with currency depreciation is found to be largest in countries with initial economic slack and with domestic financial systems that are operating normally. Some evidence suggests that the rise of global value chains has weakened the relationship between exchange rates and trade in intermediate products used as inputs into other economies’ exports. However, the bulk of global trade still consists of conventional trade, and there is little evidence of a general trend toward disconnect between exchange rates and total exports and imports.

This table shows exchange rates for currencies used in over 190 world economies presented in a crossrates layout where countries are presented in both rows and columns. National currency per US dollars exchange rates are used to derive explicit exchange rates for each of the countries presented with regard to any other country. Country series are consistent over time: for example, a conversion was made from national currency to Euro for the Euro Zone economies for all years prior to the adoption of Euro.

Percent of household final consumption expenditures spent on food, alcoholic beverages, and tobacco that were consumed at home,. The data are computed by Birgit Meade (202-694-5159), ERS/USDA, EUROMONITOR data, June 2014.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services (ITS), a component of BoP current account, are used, alongside with data on Foreign Direct Investment (a component of BoP financial account), to monitor the external commercial performance of different economies. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports. Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU and in millions of national currency. Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.

The Balance of Payments (BOP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of an economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, primary and secondary income), as well as on transactions which fall in the capital and the financial account. International investment position presents value of financial assets owned outside the economy and indebtedness of the economy to the rest of the world. BOP is an important macro-economic indicator used to assess the position of an economy (of credit or debit for current and capital acount, net acquisition of financial assets or net incurrence of liabilities for BOP financial account and international investment position) towards the external world. Out of BOP data, some indicators on international position of the EU and Member States are derived. Indicators on Main Balance of Payments and International Investment Position items as share of GDP are presented as percentage of GDP for given year or quarter and moving average for 3 consecutive years for:balance, credit and debit flows of current and capital accounts and of main current account  items: goods, services, primary and secondary income,net flows, net acquisition of financial assets and net incurrence of liabilities for total financial account and foreign direct investment, international investment position and net external debt at the end of reference quarter or year.   Indicators on export market shares present shares of each EU Member State in total world exports of goods and services for given year, and 1-year and 5-year percentage changes of these shares, as well as shares in OECD exports and 5-year percentage changes of these shares.

Imports are recorded by country of origin, exports by country of destination; quantities are regarded as imported or exported when they have crossed the political boundaries of the country, whether customs clearance has taken place or not.  The concept of the physical movement of flows applies. The monthly imports and exports data collections cover following energy commodities: solid  fuels (hard coal only)oil and petroleum productsgaselectricity      For solid fuels, crude oil and NGLs, imports and exports are reported by country of ultimate origin, respectively destination, while natural gas, refinery products and feedstocks as well as electricity are reported as coming from the country of last consignment. Quantities of crude oil and petroleum products imported or exported under processing agreements (i.e. refining on account) should be included. However, transit trade, international marine and aviation bunkers are excluded from this data set. Please note that this is different from the definition of natural gas trade in the annual gas questionnaire and from the definition in the previous monthly oil and gas questionnaire (before January 2013). For further information, please consult the Energy Statistics Regulation (Regulation (EC) 1099/2008 on energy statistics) and the reporting instructions. Monthly imports and exports of energy commodities cover the full spectrum of the 28 Member States of the European Union, EFTA States, candidate countries and potential candidates. Â

Imports are recorded by country of origin, exports by country of destination; quantities are regarded as imported or exported when they have crossed the political boundaries of the country, whether customs clearance has taken place or not.  The concept of the physical movement of flows applies. The monthly imports and exports data collections cover following energy commodities:solid  fuels (hard coal only)oil and petroleum productsgaselectricity      For solid fuels, crude oil and NGLs, imports and exports are reported by country of ultimate origin, respectively destination, while natural gas, refinery products and feedstocks as well as electricity are reported as coming from the country of last consignment. Quantities of crude oil and petroleum products imported or exported under processing agreements (i.e. refining on account) should be included. However, transit trade, international marine and aviation bunkers are excluded from this data set. Please note that this is different from the definition of natural gas trade in the annual gas questionnaire and from the definition in the previous monthly oil and gas questionnaire (before January 2013). For further information, please consult the Energy Statistics Regulation (Regulation (EC) 1099/2008 on energy statistics) and the reporting instructions. Monthly imports and exports of energy commodities cover the full spectrum of the 28 Member States of the European Union, EFTA States, candidate countries and potential candidates. Â

This table is a compilation of statistics of trade in goods and services as reported in the Balance of Payments. The conceptual framework used for the compilation is based on the IMF Balance of Payments Manual (BPM5, 1993).

This table presents information on the external long-term indebtedness of developing economies (as debtors), expressed in millions of dollars, expressed as percentage of total long-term debt, as percentage of debt source and as percentage of region. The table also provides breakdown of public and publicly guaranteed debt by source of lending (as creditors).

International trade in goods statistics are an important data source for many public and private sector decision-makers at international, European Union and national level. For example, at the European Union level, international trade data are extensively used for multilateral and bilateral negotiations within the framework of the common commercial policy, to define and implement anti-dumping policy, to evaluate the progress of the Single Market and many other policies. Moreover, they constitute an essential source for the compilation of balance of payments statistics and national accounts. International trade in goods statistics cover both extra- and intra-EU trade: Extra-EU trade statistics cover the trading of goods between Member States and a non-member countries. Intra-EU trade statistics cover the trading of goods between Member States. "Goods" means all movable property including electricity. Detailed and aggregated data are published for the Euro area, the European Union and for each Member State separately. Main components: Data record the monthly trade between Member States in terms of arrivals and dispatches of goods as well as the monthly trade in terms of imports and exports between Member States and non-member countries. However, in publications only the term “exports” for all outward flows and “imports” for all inward flows are applied for both intra-EU trade and extra-EU trade. Extra-EU trade imports and exports are recorded in the Member State where the goods are placed under the customs procedures. Extra-EU trade statistics do not record goods in transit, goods placed into customs warehouses or goods for temporary admission. Data sources: The statistical information is mainly provided by the traders on the basis of Customs (extra-EU) and Intrastat (intra-EU) declarations. Data are collected by the competent national authorities of the Member States and compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Classification systems: - Product classification: For detailed data, products are disseminated according to the Combined Nomenclature (CN8), which first six digit codes coincide with the Harmonized Commodity Description and Coding System (HS), products are disseminated as well according to the Standard International Trade Classification (SITC) and the Broad Economic Categories (BEC). - Country classification: The Geonomenclature is used for classifying reporting countries and trading partners. Nomenclatures and correspondence tables are available at the Eurostat’s classification server RAMON. The following basic information is provided by Eurostat: - reporting country, - reference period, - trade flow, - product, - trading partner - mode of transport. Detailed data are disseminated according to the Combined Nomenclature (HS2, HS4, HS6 and CN8 levels) for the following indicators: - trade value (in Euro), - trade quantity in 100 kg, - trade quantity in supplementary units (published for some goods according to the Combined Nomenclature). Aggregated data cover both short and long term indicators. Short term indicators are disseminated according to major SITC and BEC groups for the following indicators: - gross and seasonally adjusted trade value (in million Euro), - unit-value indices, - gross and seasonally adjusted volume indices, - growth rates of trade values and indices. Long term indicators are disseminated according to major SITC groups for the following indicators: - trade value (in billion Euro), - shares of Member States in EU and world trade, - shares of main trading partners in EU trade, - volume indices. Adjustments are applied by the Member States to compensate the impact of exemption thresholds, which release the information providers from statistical formalities, as well as, to take into account the late or not response of the providers. In addition, Eurostat applies seasonal adjustments to aggregated time series.

The FAO indices of agricultural production show the relative level of the aggregate volume of agricultural production for each year in comparison with the base period. They are based on the sum of price-weighted quantities of different agricultural commodities produced after deductions of quantities used as seed and feed weighted in a similar manner. The resulting aggregate represents, therefore, disposable production for any use except as seed and feed. All the indices at the country, regional and world levels are calculated by the Laspeyres formula. Production quantities of each commodity are weighted by 2004-2006 average international commodity prices and summed for each year. To obtain the index, the aggregate for a given year is divided by the average aggregate for the base period. Since the FAO indices are based on the concept of agriculture as a single enterprise, amounts of seed and feed are subtracted from the production data to avoid double counting them, once in the production data and once with the crops or livestock produced from them. Deductions for seed (in the case of eggs, for hatching) and for livestock and poultry feed apply to both domestically produced and imported commodities. They cover only primary agricultural products destined to animal feed (e.g. maize, potatoes, milk, etc.). Processed and semi-processed feed items such as bran, oilcakes, meals and molasses have been completely excluded from the calculations at all stages. It should be noted that when calculating indices of agricultural, food and nonfood production, all intermediate primary inputs of agricultural origin are deducted. However, for indices of any other commodity group, only inputs originating from within the same group are deducted; thus, only seed is removed from the group “crops” and from all crop subgroups, such as cereals, oil crops, etc.; and both feed and seed originating from within the livestock sector (e.g. milk feed, hatching eggs) are removed from the group “livestock products”. For the main two livestock subgroups, namely, meat and milk, only feed originating from the respective subgroup is removed. The”international commodity prices” are used in order to avoid the use of exchange rates for obtaining continental and world aggregates, and also to improve and facilitate international comparative analysis of productivity at the national level. These” international prices”, expressed in so-called”international dollars”, are derived using a Geary-Khamis formula for the agricultural sector. This method assigns a single “price” to each commodity. For example, one metric ton of wheat has the same price regardless of the country where it was produced. The currency unit in which the prices are expressed has no influence on the indices published. The commodities covered in the computation of indices of agricultural production are all crops and livestock products originating in each country. Practically all products are covered, with the main exception of fodder crops. The category of food production includes commodities that are considered edible and that contain nutrients. Accordingly, coffee and tea are excluded along with inedible commodities because, although edible, they have practically no nutritive value. Indices for meat production are computed based on data for production from indigenous animals, which takes account of the meat equivalent of exported live animals but excludes the meat equivalent of imported live animals. For index purposes, annual changes in livestock and poultry numbers or in their average live weight are not taken into account. The indices are calculated from production data presented on a calendar year basis. The FAO indices may differ from those produced by the countries themselves because of differences in concepts of production, coverage, weights, time reference of data and methods of calculation

AQUASTAT is FAO's global information system on water and agriculture, developed by the Land and Water Division. The main mandate of the programme is to collect, analyze and disseminate information on water resources, water uses, and agricultural water management with an emphasis on countries in Africa, Asia, Latin America and the Caribbean. This allows interested users to find comprehensive and regularly updated information at global, regional, and national levels.

Consumer price indices (CPIs) measure changes over time in the general level of prices of consumer goods and services that households acquire, use or pay for consumption. This is done by measuring the cost of purchasing a fixed basket of consumer goods and services of constant quality and similar characteristics, with the products in the basket being selected to be representative of households’ expenditure during a year or other specified period.

Note: Data represent values for time periods (1990-1992,1995-97,2000-02,2005-07) and is shown as data for the last year of time period(1992,1997,2002,2007).

Farmers produce food and fiber using a wide variety of farm practices and management systems that differ by commodity, region, and farm and operator characteristics. The mix of inputs, practices, and technologies used by farmers, when combined with land, labor, and water resources, affects production costs; farm income; and soil, water and air quality.

Value of gross production has been compiled by multiplying gross production in physical terms by output prices at farm gate. Thus, value of production measures production in monetary terms at the farm gate level. Since intermediate uses within the agricultural sector (seed and feed) have not been subtracted from production data, this value of production aggregate refers to the notion of "gross production". Value of gross production is provided in both current and constant terms and is expressed in US dollars and Standard Local Currency (SLC). The current value of production measures value in the prices relating to the period being measured. Thus, it represents the market value of food and agricultural products at the time they were produced. Knowing this figure is helpful in understanding exactly what was happening within a given economy at that point in time. Often, this information can help explain economic trends that emerged in later periods and why they took place. Value of production in constant terms is derived using the average prices of a selected year or years, known as the base period. Constant price series can be used to show how the quantity or volume of products has changed, and are often referred to as volume measures. The ratio of the current and constant price series gives a measure of price movements. US dollar figures for value of gross production are converted from local currencies using official exchange rates as prevailing in the respective years. The SLC of a country is the local currency prevailing in the latest year. Expressing data series in one uniform currency is useful because it avoids the influence of revaluation in local currency, if any, on value of production

The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections: Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States: a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups: general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

Animal production statistics cover three main sub-domains based on three pieces of relevant legislation and related gentlemen’s agreements.Livestock and meat statistics are collected under Regulation (EC) No 1165/2008. They cover meat production, as activity of slaughterhouses (monthly) and as other slaughtering (annual), meat production (gross indigenous production) forecast (semi-annual or quarterly), livestock statistics, including regional statistics. A quality report is also collected every third year.Milk and milk product statistics are collected under Decision 97/80/EC implementing Directive 96/16/EC. They cover farm production and utilisation of milk (annual), collection (monthly for cows’ milk) and production activity by dairies (annual) and statistics on the structure of dairies (every third year). An annual methodological report is also collected.Statistics on eggs for hatching and farmyard poultry chicks are collected under Regulation (EC) No 617/2008, implementing Regulation (EC) No 1234/2007 (Single CMO Regulation). They cover statistics on the structure (annual) and the activity (monthly) of hatcheries as well as reports on the external trade of chicks. European Economic Area countries (EEA, Iceland, Liechtenstein and Norway) are requested to provide milk statistics, with the exception of those related to home consumption, as stated in Annex XXI of the EEA Agreement. As Iceland is now a candidate country and Liechtenstein is exempted in the Agreement, only Norway is concerned. The Agreement between the European Community and the Swiss Confederation on cooperation in the field of statistics states that Switzerland must provide Eurostat with national milk statistics. It has been amended in 2013 for covering also some livestock and meat statistics. The same statistics are requested from the candidate countries as acquis communautaire. Further data about the same topics refer to repealed legal acts or agreements. The tables on animal product supply balance sheets (apro_mk_bal, apro_mt_bal and apro_ec_bal), statistics on the structure of rearing (apro_mt_str) and the number of laying hens (apro_ec_lshen) are therefore no longer updated. The same applies to some variables (external trade of animals and meat), periods (surveys in April or August) or items (number of horses) included in other tables. The statistical tables disseminated by Eurostat are organised into three groups of tables on Agricultural products (apro), i.e. Milk and milk products (apro_mk), Livestock and meat (apro_mt) and Poultry farming (apro_ec). This last label covers statistics on hatcheries and on trade in chicks. The regional animal production statistics collected on livestock (agr_r_animal) and on cows’ milk production on farms (agr_r_milk_pr) are disseminated separately. Due to the change in the legal basis or in the methodology, the time series may be broken. This is indicated by a flag in the tables. The detailed content of each table and the reference to its legal definition is provided in the table below. Table 3.1: Data tables disseminated regarding animal production statistics <

Not applicable

Not applicable

National accounts are a coherent and consistent set of macroeconomic indicators, which provide an overall picture of the economic situation and are widely used for economic analysis and forecasting, policy design and policy making. Eurostat publishes annual and quarterly national accounts, annual and quarterly sector accounts as well as supply, use and input-output tables, which are each presented with associated metadata. Annual national accounts are compiled in accordance with the European System of Accounts - ESA 2010 as defined in Annex B of the Council Regulation (EU) No 549/2013 of the European Parliament and of the Council of 21 May 2013.   The previous European System of Accounts, ESA95, was reviewed to bring national accounts in the European Union, in line with new economic environment, advances in methodological research and needs of users and the updated national accounts framework at the international level, the SNA 2008. The revisions are reflected in an updated Regulation of the European Parliament and of the Council on the European system of national and regional accounts in the European Union of 2010 (ESA 2010). The associated transmission programme is also updated and data transmissions in accordance with ESA 2010 are compulsory from September 2014 onwards. Further information on the transition from ESA 95 to ESA 2010 is presented on the Eurostat website. The domain consists of the following collections:   1. Main GDP aggregates: main components from the output, expenditure and income side, expenditure breakdowns by durability and exports and imports by origin. <

National accounts are a coherent and consistent set of macroeconomic indicators, which provide an overall picture of the economic situation and are widely used for economic analysis and forecasting, policy design and policy making. Eurostat publishes annual and quarterly national accounts, annual and quarterly sector accounts as well as supply, use and input-output tables, which are each presented with associated metadata. Annual national accounts are compiled in accordance with the European System of Accounts - ESA 2010 as defined in Annex B of the Council Regulation (EU) No 549/2013 of the European Parliament and of the Council of 21 May 2013.   The previous European System of Accounts, ESA95, was reviewed to bring national accounts in the European Union, in line with new economic environment, advances in methodological research and needs of users and the updated national accounts framework at the international level, the SNA 2008. The revisions are reflected in an updated Regulation of the European Parliament and of the Council on the European system of national and regional accounts in the European Union of 2010 (ESA 2010). The associated transmission programme is also updated and data transmissions in accordance with ESA 2010 are compulsory from September 2014 onwards. Further information on the transition from ESA 95 to ESA 2010 is presented on the Eurostat website. The domain consists of the following collections:   1. Main GDP aggregates: main components from the output, expenditure and income side, expenditure breakdowns by durability and exports and imports by origin. <

Final energy consumption includes all energy delivered to the final consumer's door (in the industry, transport, households and other sectors) for all energy uses. It excludes deliveries for transformation and/or own use of the energy producing industries, as well as network losses. This table presents the total final energy consumption (product 0000 – All products) and the energy consumption of a selected number of products or product groups.

20.1. Source data

20.1. Source data

20.1. Source data

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a geographical region during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services, a component of BoP current account, and data on Foreign Direct Investment, a component of BoP financial account, are used to monitor the external commercial performance of different economies. Outward Foreign Affiliates Statistics (FATS) measure the commercial presence, as defined by the General Agreement on Trade in Services (GATS), through affiliates in foreign markets. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports.  Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU or in millions of national currency. Balance of Payments data coverage varies according to the collection. Some collections refer only to Euro area or EU countries, while some others' coverage includes also EU partner countries.   Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide 2003. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.    More information on BoP is available for each specific collection: Quarterly BoP, ITS, FDI, Outward FATS, BoP of EU Institutions.

This database of indicators of financial development and structure across countries and over time includes a range of indicators (31 indicators in total), starting from 1960, that measure the size, activity, and efficiency of financial intermediaries and markets. The compiled data permits the construction of financial structure indicators to measure whether, for example, a country's banks are larger, more active, and more efficient than its stock markets. These indicators can then be used to investigate the empirical link between the legal, regulatory, and policy environment and indicators of financial structure. They can also be used to analyze the implications of financial structure for economic growth.

Data on marriages and divorces at national level are based on the annual demographic data collections in the field of demography carried out by Eurostat. The completeness of information depends on the availability of data reported by the National Statistical Institutes. The Joint demographic data collection is carried out in cooperation with United Nation Statistical Division (UNSD) in the summer of each year, having the deadline 15 September. During this data collection Eurostat collects from the national statistical institutes detailed data by sex, age and other characteristics for the demographic events (births, deaths, marriages and divorces) of the previous year and the population on 1 January of the current and previous years. More specifically, during year T the following data are collected and disseminated on fertility field: - total number of marriages and divorces - persons getting married during the reference year by previous legal marital status, year T-1 Data can be found under the section Marriages and divorces (demo_nup). The information is updated towards the end of each year based on information collected during the Joint data collection. Moreover, any update sent by the countries in-between data collections are validated, processed and uploaded into Eurostat's demographic database and in Eurostat's free dissemination online database as soon as possible. Aggregates are recalculated accordingly. The data transmitted by the National Statistical Institutes are validated by Eurostat, processed and uploaded into Eurostat's Demographic Database and in Eurostat's free dissemination online database. The data are also disseminated in several thematic and horizontal Eurostat's publications. Data are presented by single country and for aggregates of countries. For EU and Euro Area, only the current and the previous version of the aggregates are published. The currently disseminated aggregates are: EU-27, EU-25, EA-16, and EA-15. Moreover, data is disseminated for the European Economic Area (EEA) and the European Free Trade Association (EFTA). International marriages and divorces Statistics on the number of international marriages and divorces (2000-2007) were collected by Eurostat from national statistical institutes in September 2008. The data were further used by the European Commission for preparing  a proposal for a Council Regulation on the law applicable in divorce and legal separation.  These data collected are available upon request.

Data on marriages and divorces at national level are based on the annual demographic data collections in the field of demography carried out by Eurostat. The completeness of information depends on the availability of data reported by the National Statistical Institutes. The Joint demographic data collection is carried out in cooperation with United Nation Statistical Division (UNSD) in the summer of each year, having the deadline 15 September. During this data collection Eurostat collects from the national statistical institutes detailed data by sex, age and other characteristics for the demographic events (births, deaths, marriages and divorces) of the previous year and the population on 1 January of the current and previous years. More specifically, during year T the following data are collected and disseminated on fertility field: - total number of marriages and divorces - persons getting married during the reference year by previous legal marital status, year T-1 Data can be found under the section Marriages and divorces (demo_nup). The information is updated towards the end of each year based on information collected during the Joint data collection. Moreover, any update sent by the countries in-between data collections are validated, processed and uploaded into Eurostat's demographic database and in Eurostat's free dissemination online database as soon as possible. Aggregates are recalculated accordingly. The data transmitted by the National Statistical Institutes are validated by Eurostat, processed and uploaded into Eurostat's Demographic Database and in Eurostat's free dissemination online database. The data are also disseminated in several thematic and horizontal Eurostat's publications. Data are presented by single country and for aggregates of countries. For EU and Euro Area, only the current and the previous version of the aggregates are published. The currently disseminated aggregates are: EU-27, EU-25, EA-16, and EA-15. Moreover, data is disseminated for the European Economic Area (EEA) and the European Free Trade Association (EFTA). International marriages and divorces Statistics on the number of international marriages and divorces (2000-2007) were collected by Eurostat from national statistical institutes in September 2008. The data were further used by the European Commission for preparing  a proposal for a Council Regulation on the law applicable in divorce and legal separation.  These data collected are available upon request.

The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections: Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States: a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups: general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections:Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States:a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups:general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

A food balance sheet presents a comprehensive picture of the pattern of a country's food supply during a specified reference period. The food balance sheet shows for each food item i.e. each primary commodity availability for human consumption which corresponds to the sources of supply and its utilisation. The total quantity of foodstuffs produced in a country added to the total quantity imported and adjusted to any change in stocks that may have occurred since the beginning of the reference period gives the supply available during that period. On the utilisation side a distinction is made between the quantities exported, fed to livestock + used for seed, losses during storage and transportation, and food supplies available for human consumption. The per capita supply of each such food item available for human consumption is then obtained by dividing the respective quantity by the related data on the population actually partaking in it. Data on per capita food supplies are expressed in terms of quantity and by applying appropriate food composition factors for all primary and processed products also in terms of dietary energy value, protein and fat content. The Food Balances domain covers: Production Trade Feed and Seed Waste Other utilisation Consumption Elements covered: Quantities Calories, Proteins, Fats

Collect food prices data in your country and earn up to $120 every month.We are looking for data collectors who will go to the specific markets weekly, collect data on food prices for about 25 items and submit them into our system.

Food supply data is some of the most important data in FAOSTAT. In fact, this data is for the basis for estimation of global and national undernourishment assessment, when it is combined with parameters and other data sets. This data has been the foundation of food balance sheets ever since they were first constructed. The data is accessed by both business and governments for economic analysis and policy setting, as well as being used by the academic community. The agricultural supply domain covers food commodities that have been converted back into primary equivalents: Quantity Dietary Energy Proteins Fats Totals and per Capita

Food supply data is some of the most important data in FAOSTAT. In fact, this data is for the basis for estimation of global and national undernourishment assessment, when it is combined with parameters and other data sets.This data has been the foundation of food balance sheets ever since they were first constructed. The data is accessed by both business and governments for economic analysis and policy setting, as well as being used by the academic community. The agricultural supply domain covers food commodities that have been converted back into primary equivalents: Quantity Dietary Energy, Proteins, Fats, Totals and per Capita

Football Dataset, 2013, FIFA

The number of students enrolled refers to the count of students studying in the reference period. Each student enrolled in the education programmes covered by the corresponding category is counted once and only once. National data collection systems permitting, the statistics reflect the number of students enrolled at the beginning of the school / academic year. Preferably, the end (or near-end) of the first month of the school / academic year is chosen (special arrangements are made for part-year students who may not start studies at the beginning of the school year). Students are classified as foreign students (non-citizens) if they are not citizens of the country in which the data are collected. While pragmatic and operational, this classification is inappropriate for capturing student mobility because of differing national policies regarding the naturalisation of immigrants. Countries that have lower propensity to grant permanent residence to its immigrant populations are likely to report second generation immigrants as foreign students. Therefore, for student mobility and bilateral comparisons, interpretations of data based on the concept of foreign students should be made with caution. Students are classified as international students if they left their country of origin and moved to another country for the purpose of study. Depending on country-specific immigration legislation, mobility arrangements, and data availability, international students may be defined as students who are not permanent or usual residents of their country of study or alternatively as students who obtained their prior education in a different country, including another EU country.

Eurostat Dataset Id:educ_enrl8 The aim of the education statistics domain is to provide comparable statistics and indicators on key aspects of the education systems across Europe. The data cover participation and completion of education programmes by pupils and students, personnel in education and the cost and type of resources dedicated to education. The standards on international statistics on education and training systems are set by the three international organisations jointly administering the UOE data collection:the United Nations Educational, Scientific, and Cultural Organisation Institute for Statistics (UNESCO-UIS),the Organisation for Economic Co-operation and Development (OECD) and,the Statistical Office of the European Union (EUROSTAT). The following topics are covered:Context - School-aged population, overall participation rates in educationDistribution of pupils/students by levelParticipation/enrolment in education (ISCED 0-4)Tertiary education participationTertiary education graduatesTeaching staff (ISCED 1-3)Pupil/students-teacher ratio and average class size (ISCED 1-3)Language learning (ISCED 1-3)Regional enrolmentsExpenditure on education in current pricesExpenditure on education in constant pricesExpenditure on education as % of GDP or public expenditureExpenditure on public and private educational institutionsFinancial aid to studentsFunding of education Other tables, used to measure progress towards the Lisbon objectives in education and training, are gathered in the Thematic indicators tables. They contain the following indicators: - Teachers and trainers - Mathematics, science and technology enrolments and graduates - Investments in education and training - Participation rates in education by age and sex - Foreign language learning - Student mobility

Eurostat's database covers 1) Production and trade in roundwood and wood products, including primary and secondary products 2) Economic data on forestry and logging, including employment data 3) Sustainable forest management, comprising forest resources (assets) and environmental data. The main types of primary forest products included in (1) are: roundwood, sawnwood, wood-based panels, pulp, and paper and paperboard. Secondary products include further processed wood and paper products. These products are presented in greater detail; definitions are available. All of the data are compiled from the Joint Forest Sector Questionnaire (JFSQ), except for table (e), which is directly extracted from Eurostat's international trade database COMEXT (HS/CN Chapter 44). The tables in (1) cover details of the following topics: - Roundwood removals and production by type of wood and assortment (a) - Roundwood production by type of ownership (b) - Production and trade in roundwood, fuelwood and other basic products (c) - Trade in industrial roundwood by assortment and species (d) - Tropical wood imports to the EU from Chapter 44 of the Harmonised System (e) - Production and trade in sawnwood, panels and other primary products (f) - Sawnwood trade by species (g) - Production and trade in pulp and paper & paperboard (h) - Trade in secondary wood and paper products (i) Data in (2) include the output, intermediate consumption, gross value added, fixed capital consumption, gross fixed capital formation and different measures of income of forestry and logging.  The data are in current basic prices and are compatible with National Accounts. They are collected as part of Intergrated environmental and economic accounting for forests (IEEAF), which also covers labour input in annual work units (AWU).  Under (2), two separate tables cover the number of employees of forestry and logging, the manufacture of wood and products of wood and cork, and the manufacture of paper and paper products, as estimated from the Labour Force Survey results. There are two separate tables because of the change in the EU's classification of economic activities from NACE Rev. 1.1 to NACE Rev. 2 in 2008. More detailed information on wood products and accounting, including definitions and questionnaires, can be found on our open-access communication platform under the interest group 'Forestry statistics and accounts'.  Data in (3) are not collected by Eurostat, but by the FAO, UNECE, Forest Euope, the European Commission's departments for Environment and the Joint Research Centre. They include forest area, wood volume, defoliation on sample plots, fires and areas with protective functions.

20.1. Source data

The UN FAO Forestry Statistics contains global compilations of comparable annual statistics on the production and import/export of forest products

World and National CO2 Emissions from Fossil-Fuel Burning, Cement Manufacture, and Gas Flaring. Source: Tom Boden, Gregg Marland and Bob Andres (Oak Ridge National Laboratory)

The FSI focuses on the indicators of risk and is based on thousands of articles and reports that are processed by our CAST Software from electronically available sources.

Freedom in the World is Freedom House’s flagship annual report, assessing the condition of political rights and civil liberties around the world. It is composed of numerical ratings and supporting descriptive texts for 195 countries and 15 territories. Freedom in the World has been published since 1973, allowing Freedom House to track global trends in freedom over more than 40 years. It has become the most widely read and cited report of its kind, used on a regular basis by policymakers, journalists, academics, activists, and many others.

The domain EUROFARM (ef) contains information (statistical tables) on structure of agricultural holdings collected through agricultural structure surveys. The data of the domain have been organised into two collections: Results of the farm structure surveys contains data from 1990 onwards based on the 1988 legislation andResults of the farm structure surveys based on the legislation from 2008. This collection contains the data from the 2010 Census onwards as well as the data for the surveys 2007 and 2005. Farm Structure Survey data are used to collect information on agricultural holdings in the Member States at different geographic levels (Member States, regions, districts) and over periods (follow up the changes in agricultural sector), thus provide a base for decision making in the Common Agricultural Policy. Two kinds of Farm Structure Survey (FSS) are carried out by Member States: a basic survey (full scope Agricultural Census - AC) every 10 years,several sample based intermediate surveys between them. However for certain characteristics the Member States may use sample base for every survey. The calendar for the surveys to be held in all Member States is agreed by the Agricultural Statistics Committee of the European Commission. For a given survey year, Member States have to conduct their surveys within the agreed time-frame, thus all the data are as comparable as possible. The FSS are organised in all Member States on a harmonised base. Whereas the characteristics are based on community legislation, the same data are available for all countries in case of each survey. The data on individual agricultural holdings are collected by all Member States and sent to Eurostat. The aggregated results are disseminated through statistical tables. The variables are arranged into groups: general overview with key variables,and other specialized groups containing detailed data onland uselivestockfarm labour forcerural development issues as well as management and practices. The 2010 survey additionally provides the results of the survey on agricultural production methods (SAPM). The scope of the survey is agriculture, while the survey unit is the agricultural holding (farm). Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2011 amending the NUTS classification from January 2003. The Eurofarm domain does not cover the whole territory only the land covered by the agricultural holdings. So the land use data without link with other farm characteristics should be downloaded by the user from the relevant domain. Specific national data about crops, animals or agricultural labour force can be found in other domains, without link between the other information at farm level. For a comprehensive description of the domain, please consult detailed structure (See annex at the bottom of the page). Regional Data Data for basic surveys are available in a three-level geographical breakdown of the whole country, the regions and the district; while data for intermediate surveys are only available upon the two-levels of country and regions. Since FSS 1999/2000 information about local farm location is collected in most countries, so that the data can also be disseminated by NUTS classification and are robust regarding the changes in the NUTS definition. The FSS 2009/2010 information is inline with the NUTS 2010 classification: Regulation (EU) No 31/2001 amending the NUTS classification from January 2012. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

National accounts are a coherent set of macroeconomic indicators, which provide an overall picture of the economic situation and are widely used for economic analysis and forecasting, policy design and policy making. The data presented in this collection are the results of a pilot exercise on the sharing selected main GDP aggregates, population and employment data collected by different international organisations. It wasconducted by the Task Force in International Data Collection (TFIDC) which was established by the  Inter-Agency Group on Economic and Financial Statistics (IAG).  The goal of this pilot is to develop a set of commonly shared principles and working arrangements for data cooperation that could be implemented by the international agencies. The data sets are an experimental exercise to present national accounts data form various countries across the globe in one coherent folder, but users should be aware that these data are collected and validated by different organisations and not fully harmonised from a methodological point of view.  The domain consists of the following collections:

National accounts are a coherent set of macroeconomic indicators, which provide an overall picture of the economic situation and are widely used for economic analysis and forecasting, policy design and policy making. The data presented in this collection are the results of a pilot exercise on the sharing selected main GDP aggregates, population and employment data collected by different international organisations. It wasconducted by the Task Force in International Data Collection (TFIDC) which was established by the  Inter-Agency Group on Economic and Financial Statistics (IAG).  The goal of this pilot is to develop a set of commonly shared principles and working arrangements for data cooperation that could be implemented by the international agencies. The data sets are an experimental exercise to present national accounts data form various countries across the globe in one coherent folder, but users should be aware that these data are collected and validated by different organisations and not fully harmonised from a methodological point of view.  The domain consists of the following collections: