Турция

Data in this domain constitute only a small part of the entire National Accounts data range available from Eurostat. Annual and quarterly national accounts are compiled in accordance with the European System of Accounts - ESA 2010as defined in Annex B of the Council Regulation (EU) No 549/2013 of the European Parliament and of the Council of 21 May 2013. The previous European System of Accounts, ESA95, was reviewed to bring national accounts in the European Union, in line with new economic environment, advances in methodological research and needs of users and the updated national accounts framework at the international level, the SNA 2008. The revisions are reflected in an updated Regulation of the European Parliament and of the Council on the European system of national and regional accounts in the European Union of 2010 (ESA 2010). The associated transmission programme is also updated and data transmissions in accordance with ESA 2010 are compulsory from September 2014 onwards. The annual data of this domain consists of the following collections: 1. Main GDP aggregates: main components from the output, expenditure and income side. nama_10_gdp: GDP and main components (output, expenditure and income   The quarterly data of this domain consists of the following collections 1. Main GDP aggregates, main components from the output, expenditure and income side, expenditure breakdowns by industry and assets. namq_10_ma: Main GDP aggregatesnamq_10_gdp: GDP and main components (output, expenditure and incomenamq_10_fcs: Final consumption aggregates by durabilitynamq_10_exi: Exports and imports by Member States of the EU/third countries 2. Breakdowns of GDP aggregates and employment data by main industries and asset classes. namq_10_bbr: Basic breakdowns main GDP aggregates and employment (by industry and assets)namq_10_a10: Gross value added and income by A*10 industrynamq_10_an6: Gross fixed capital formation by AN_F6 asset typenamq_10_a10_e: Employment by A*10 industry breakdowns Geographical entities covered are the European Union, the euro area, EU Member States, Candidate Countries, EFTA countries, US, Japan and possibly other countries on an ad-hoc basis. Data sources: National Statistical Institutes

Data in this domain constitute only a small part of the entire National Accounts data range available from Eurostat. Annual and quarterly national accounts are compiled in accordance with the European System of Accounts - ESA 2010as defined in Annex B of the Council Regulation (EU) No 549/2013 of the European Parliament and of the Council of 21 May 2013. The previous European System of Accounts, ESA95, was reviewed to bring national accounts in the European Union, in line with new economic environment, advances in methodological research and needs of users and the updated national accounts framework at the international level, the SNA 2008. The revisions are reflected in an updated Regulation of the European Parliament and of the Council on the European system of national and regional accounts in the European Union of 2010 (ESA 2010). The associated transmission programme is also updated and data transmissions in accordance with ESA 2010 are compulsory from September 2014 onwards. The annual data of this domain consists of the following collections: 1. Main GDP aggregates: main components from the output, expenditure and income side. nama_10_gdp: GDP and main components (output, expenditure and income   The quarterly data of this domain consists of the following collections 1. Main GDP aggregates, main components from the output, expenditure and income side, expenditure breakdowns by industry and assets. namq_10_ma: Main GDP aggregatesnamq_10_gdp: GDP and main components (output, expenditure and incomenamq_10_fcs: Final consumption aggregates by durabilitynamq_10_exi: Exports and imports by Member States of the EU/third countries 2. Breakdowns of GDP aggregates and employment data by main industries and asset classes. namq_10_bbr: Basic breakdowns main GDP aggregates and employment (by industry and assets)namq_10_a10: Gross value added and income by A*10 industrynamq_10_an6: Gross fixed capital formation by AN_F6 asset typenamq_10_a10_e: Employment by A*10 industry breakdowns Geographical entities covered are the European Union, the euro area, EU Member States, Candidate Countries, EFTA countries, US, Japan and possibly other countries on an ad-hoc basis. Data sources: National Statistical Institutes

Data in this domain constitute only a small part of the entire National Accounts data range available from Eurostat. Annual and quarterly national accounts are compiled in accordance with the European System of Accounts - ESA 2010as defined in Annex B of the Council Regulation (EU) No 549/2013 of the European Parliament and of the Council of 21 May 2013. The previous European System of Accounts, ESA95, was reviewed to bring national accounts in the European Union, in line with new economic environment, advances in methodological research and needs of users and the updated national accounts framework at the international level, the SNA 2008. The revisions are reflected in an updated Regulation of the European Parliament and of the Council on the European system of national and regional accounts in the European Union of 2010 (ESA 2010). The associated transmission programme is also updated and data transmissions in accordance with ESA 2010 are compulsory from September 2014 onwards. The annual data of this domain consists of the following collections: 1. Main GDP aggregates: main components from the output, expenditure and income side.nama_10_gdp: GDP and main components (output, expenditure and income   The quarterly data of this domain consists of the following collections 1. Main GDP aggregates, main components from the output, expenditure and income side, expenditure breakdowns by industry and assets. namq_10_ma: Main GDP aggregatesnamq_10_gdp: GDP and main components (output, expenditure and incomenamq_10_fcs: Final consumption aggregates by durabilitynamq_10_exi: Exports and imports by Member States of the EU/third countries 2. Breakdowns of GDP aggregates and employment data by main industries and asset classes. namq_10_bbr: Basic breakdowns main GDP aggregates and employment (by industry and assets)namq_10_a10: Gross value added and income by A*10 industrynamq_10_an6: Gross fixed capital formation by AN_F6 asset typenamq_10_a10_e: Employment by A*10 industry breakdowns Geographical entities covered are the European Union, the euro area, EU Member States, Candidate Countries, EFTA countries, US, Japan and possibly other countries on an ad-hoc basis. Data sources: National Statistical Institutes

AMECO is the annual macro-economic database of the European Commission's Directorate General for Economic and Financial Affairs (DG ECFIN). The database is regularly cited in DG ECFIN's publications and is indispensable for DG ECFIN's analyses and reports. To ensure that DG ECFIN's analyses are verifiable and transparent to the public, AMECO data is made available free of charge. AMECO contains data for EU-27, the euro area, EU Member States, candidate countries and other OECD countries (United States, Japan, Canada, Switzerland, Norway, Iceland, Mexico, Korea, Australia and New Zealand).

This data collection has been discontinued in 2012. Data is only available up to reference year 2011. Annual data on average gross earnings and related employment are included in the Gross earnings - Annual data collection. Data are available for EU Member States, Norway, Iceland and Switzerland. Data are also broken down by: From reference year 2008 onwards average gross annual earnings per employee are provided by economic activity (NACE Rev.2 aggregates and sections B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, B_TO_E, B_TO_F, B_TO_N, B_TO_S_NOT_O, B_TO_S, G_TO_J, G_TO_N, G_TO_S_NOT_O, K_TO_N, P_TO_S and O_TO_S)for enterprises with 1+ and for enterprises with 10+ employees for the following breakdowns:FTU= full-time units, FT=full-time workers, PT=part-time workers by Total, Men and Women. Before 2008: data is broken down by economic activity (NACE Rev. 1.1 for Sections C to K and the C-E, C-F, G-I, J-K, G-K, C-K and for some Member States L, M-O, L-O and also C-O aggregates) FTU= full-time units, FT=full-time workers, PT=part-time workersgenderoccupation (ISCO-88 classification, one-digit level and the 1-5 and 7-9 aggregates)The data relate to the staff of enterprises having at least 10 employees in most countries. Countries provide these annual data using several statistical sources mainly the four-yearly SES, the EU Labour Force Survey and/or administrative data.

The Balance of Payments (BOP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of an economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, primary and secondary income), as well as on transactions which fall in the capital and the financial account. International investment position presents value of financial assets owned outside the economy and indebtedness of the economy to the rest of the world. BOP is an important macro-economic indicator used to assess the position of an economy (of credit or debit for current and capital acount, net acquisition of financial assets or net incurrence of liabilities for BOP financial account and international investment position) towards the external world. Out of BOP data, some indicators on international position of the EU and Member States are derived. Indicators on Main Balance of Payments and International Investment Position items as share of GDP are presented as percentage of GDP for given year or quarter and moving average for 3 consecutive years for: balance, credit and debit flows of current and capital accounts and of main current account  items: goods, services, primary and secondary income,net flows, net acquisition of financial assets and net incurrence of liabilities for total financial account and foreign direct investment, international investment position and net external debt at the end of reference quarter or year. Indicators on export market shares present shares of each EU Member State in total world exports of goods and services for given year, and 1-year and 5-year percentage changes of these shares, as well as shares in OECD exports and 5-year percentage changes of these shares.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a geographical region during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services, a component of BoP current account, and data on Foreign Direct Investment, a component of BoP financial account, are used to monitor the external commercial performance of different economies. Outward Foreign Affiliates Statistics (FATS) measure the commercial presence, as defined by the General Agreement on Trade in Services (GATS), through affiliates in foreign markets. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports.  Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU or in millions of national currency. Balance of Payments data coverage varies according to the collection. Some collections refer only to Euro area or EU countries, while some others' coverage includes also EU partner countries.   Several statistical adjustments are applied to the original data provided by the Member States. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.    More information on BoP is available for each specific collection: Quarterly BoP, ITS, FDI, Outward FATS, BoP of EU Institutions.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a geographical region during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services, a component of BoP current account, and data on Foreign Direct Investment, a component of BoP financial account, are used to monitor the external commercial performance of different economies. Outward Foreign Affiliates Statistics (FATS) measure the commercial presence, as defined by the General Agreement on Trade in Services (GATS), through affiliates in foreign markets. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports.  Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU or in millions of national currency. Balance of Payments data coverage varies according to the collection. Some collections refer only to Euro area or EU countries, while some others' coverage includes also EU partner countries.   Several statistical adjustments are applied to the original data provided by the Member States. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.    More information on BoP is available for each specific collection: Quarterly BoP, ITS, FDI, Outward FATS, BoP of EU Institutions.

This Dataset contains 3 Tables. Banks' balance sheet assets and liabilities - Annual data (mny_agg_a) Banks' balance sheet assets and liabilities - Quarterly data (mny_agg_q) Banks' balance sheet assets and liabilities - Monthly data (mny_agg_m). Note: Eurostat Hierarchy: Economy and finance > Monetary and other financial statistics (mny) > Monetary aggregates, counterparts, and other banks' balance sheet items (mny_agg).

The Community Innovation Survey (CIS) is a survey of innovation activity in enterprises. The harmonised survey is designed to provide information on the innovativeness of sectors by type of enterprises, on the different types of innovation and on various aspects of the development of an innovation, such as the objectives, the sources of information, the public funding or the expenditures. The CIS provides statistics broke down by countries, type of innovators, economic activities and size classes. The survey is currently carried out every two years across the European Union, some EFTA countries and EU candidate countries. In order to ensure comparability across countries, Eurostat, in close cooperation with the countries, has developed a standard core questionnaire starting with the CIS3 data collection, along with an accompanying set of definitions and methodological recommendations. The concepts and underlying methodology of the CIS are also based on the Oslo Manual — second edition of 1997 and third edition of 2005 (see link at the bottom of the page). Up to CIS 2010, CIS results were collected under Commission Regulation (EC) No 1450/2004. A new Regulation will apply from CIS 2012 (EC No 995/2012). The data presented in these tables refer to enterprises with ‘10 employees or more’ active in the sectors to be covered under the Regulation (cf. NACE CORE). Further activities may be covered on a voluntary basis. Most statistics are based on a reference period of three years, but some use one calendar year. Since CIS 2008, the survey has included an ad-hoc module. It consists of a set of questions focusing on a special theme. The themes are different in each survey wave, allowing data to be obtained on specific issues beyond the data usually collected. Overview over time: Initially, the CIS data collection was carried out every four years. The first collection (CIS Light) was launched in 1993 as a pilot exercise and the second (CIS2) was carried out in 1997/1998 for most countries except Greece and Ireland, where it was launched in 1999. The third survey (CIS3) was conducted in 2000/2001 for most participating countries with the exception of Norway, Iceland, Luxembourg and Greece, where it was launched in 2002. As from 2004, the survey has been carried out every two years. CIS4 was conducted in the 25 EU Member States (as for 2004), Iceland, Norway, Bulgaria and Romania. The survey was launched in 2005 with a three-year reference period 2002 to 2004 for most indicators. The fifth survey CIS 2006 was carried out in all 25 EU Member States (as for 2006), Norway, Bulgaria, Romania, Croatia and Turkey. It was launched in 2007, mostly for the reference period 2004 to 2006. As regards CIS 2008, 26 Member States (all except Greece), Iceland, Norway, Croatia and Turkey took part in the survey. CIS 2008 was launched in 2009 with a three-year reference period 2006 to 2008 for most indicators. Changes were made to the CIS 2008 questionnaire to bring it into line with the third revision of the Oslo Manual, 2005 edition, by giving greater weight to organisational and marketing innovation. CIS 2008 was complemented by an ad-hoc module on innovation with environmental benefits. The seventh Community Innovation Survey, CIS 2010, had 31 participating countries (all the EU 27 Member States (except Greece), Iceland, Norway, Croatia, Serbia and Turkey) and reported most results for the reference period. CIS 2010 also follows the recommendations of the Oslo Manual and reports indicators on four types of innovation: product, process, organisational and marketing. However, despite implementation of the recommendations of the third edition of the Oslo Manual, the question on innovation expenditures is still limited to product and process innovation in order to maintain continuity with earlier versions of the CIS. Furthermore, generally fewer questions are asked about organisational and marketing innovation than about product and process innovation. While the European innovation statistics use the aggregated national data, the microdata sets can be accessed by researchers via the SAFE Centre of Eurostat in Luxembourg or via the microdata on CD-ROM releases in more anonymised form; some countries also provide access to their micro-data at similar safe centres.

The Community Innovation Survey (CIS) is a survey of innovation activity in enterprises. The harmonised survey is designed to provide information on the innovativeness of sectors by type of enterprises, on the different types of innovation and on various aspects of the development of an innovation, such as the objectives, the sources of information, the public funding or the expenditures. The CIS provides statistics broke down by countries, type of innovators, economic activities and size classes. The survey is currently carried out every two years across the European Union, some EFTA countries and EU candidate countries. In order to ensure comparability across countries, Eurostat, in close cooperation with the countries, has developed a standard core questionnaire starting with the CIS3 data collection, along with an accompanying set of definitions and methodological recommendations. The concepts and underlying methodology of the CIS are also based on the Oslo Manual — second edition of 1997 and third edition of 2005 (see link at the bottom of the page). Up to CIS 2010, CIS results were collected under Commission Regulation (EC) No 1450/2004. A new Regulation will apply from CIS 2012 (EC No 995/2012). The data presented in these tables refer to enterprises with ‘10 employees or more’ active in the sectors to be covered under the Regulation (cf. NACE CORE). Further activities may be covered on a voluntary basis. Most statistics are based on a reference period of three years, but some use one calendar year. Since CIS 2008, the survey has included an ad-hoc module. It consists of a set of questions focusing on a special theme. The themes are different in each survey wave, allowing data to be obtained on specific issues beyond the data usually collected. Overview over time: Initially, the CIS data collection was carried out every four years. The first collection (CIS Light) was launched in 1993 as a pilot exercise and the second (CIS2) was carried out in 1997/1998 for most countries except Greece and Ireland, where it was launched in 1999. The third survey (CIS3) was conducted in 2000/2001 for most participating countries with the exception of Norway, Iceland, Luxembourg and Greece, where it was launched in 2002. As from 2004, the survey has been carried out every two years. CIS4 was conducted in the 25 EU Member States (as for 2004), Iceland, Norway, Bulgaria and Romania. The survey was launched in 2005 with a three-year reference period 2002 to 2004 for most indicators. The fifth survey CIS 2006 was carried out in all 25 EU Member States (as for 2006), Norway, Bulgaria, Romania, Croatia and Turkey. It was launched in 2007, mostly for the reference period 2004 to 2006. As regards CIS 2008, 26 Member States (all except Greece), Iceland, Norway, Croatia and Turkey took part in the survey. CIS 2008 was launched in 2009 with a three-year reference period 2006 to 2008 for most indicators. Changes were made to the CIS 2008 questionnaire to bring it into line with the third revision of the Oslo Manual, 2005 edition, by giving greater weight to organisational and marketing innovation. CIS 2008 was complemented by an ad-hoc module on innovation with environmental benefits. The seventh Community Innovation Survey, CIS 2010, had 31 participating countries (all the EU 27 Member States (except Greece), Iceland, Norway, Croatia, Serbia and Turkey) and reported most results for the reference period. CIS 2010 also follows the recommendations of the Oslo Manual and reports indicators on four types of innovation: product, process, organisational and marketing. However, despite implementation of the recommendations of the third edition of the Oslo Manual, the question on innovation expenditures is still limited to product and process innovation in order to maintain continuity with earlier versions of the CIS. Furthermore, generally fewer questions are asked about organisational and marketing innovation than about product and process innovation. While the European innovation statistics use the aggregated national data, the microdata sets can be accessed by researchers via the SAFE Centre of Eurostat in Luxembourg or via the microdata on CD-ROM releases in more anonymised form; some countries also provide access to their micro-data at similar safe centres.

This collection provides users with data concerning R&D expenditure and R&D personnel broken down by following institutional sectors: business enterprise (BES), government (GOV), higher education (HES), private non-profit (PNP) with the total of sectors. All data are broken down by the above mentioned sectors of performance. The R&D expenditure is further broken down by source of funds, by type of costs, by economic activity (NACE Rev.2), by size class, by type of R&D, by fields of science, by socio-economic objectives and by regions (NUTS 2 level). Besides R&D expenditures in basic unit National currency (MIO_NAC) the following units are available: Euro (MIO_EUR), Euro per inhabitant (EUR_HAB) Purchasing Power Standard (MIO_PPS), Purchasing Power Standard at 2005 prices (MIO_PPS_KP05), Purchasing Power Standard per inhabitant at constant 2005 prices (PPS_KP05_HAB), Percentage of GDP (PC_GDP) and Percentage of total R&D expenditure (PC_TOT - for the breakdown by source of funds). R&D personnel data is available in full-time equivalent (FTE), in head count (HC), as a % of employment and as a % of labour force. The data is further broken down by occupation, by qualification, by gender, by size class, by citizenship, by age groups, by fields of science, by economic activity (NACE Rev.2) and by regions (NUTS 2 level). The periodicity of R&D data is biennial except for the key R&D indicators (R&D expenditure, R&D personnel and Researchers by sectors of performance) which are transmitted annually by the EU Member States on the basis of a legal obligation from 2003 onwards. Some other breakdowns of the data may appear on annual basis based on voluntary data provisions. The data are collected through sample or census surveys, from administrative registers or through a combination of sources. R&D data are available for following countries and country groups: - All EU Member States, plus Candidate Countries, EFTA Countries, the Russian Federation, China, Japan, the United States and South Korea. - Country groups: EU-28, EU-15 and EA-18. R&D data are compiled in accordance to the guidelines laid down in the Proposed standard practice for surveys of research and experimental development - Frascati Manual (FM), OECD, 2002 .

This collection provides users with data concerning R&D expenditure and R&D personnel broken down by following institutional sectors: business enterprise (BES), government (GOV), higher education (HES), private non-profit (PNP) with the total of sectors. All data are broken down by the above mentioned sectors of performance. The R&D expenditure is further broken down by source of funds, by type of costs, by economic activity (NACE Rev.2), by size class, by type of R&D, by fields of science, by socio-economic objectives and by regions (NUTS 2 level). Besides R&D expenditures in basic unit National currency (MIO_NAC) the following units are available: Euro (MIO_EUR), Euro per inhabitant (EUR_HAB) Purchasing Power Standard (MIO_PPS), Purchasing Power Standard at 2005 prices (MIO_PPS_KP05), Purchasing Power Standard per inhabitant at constant 2005 prices (PPS_KP05_HAB), Percentage of GDP (PC_GDP) and Percentage of total R&D expenditure (PC_TOT - for the breakdown by source of funds). R&D personnel data is available in full-time equivalent (FTE), in head count (HC), as a % of employment and as a % of labour force. The data is further broken down by occupation, by qualification, by gender, by size class, by citizenship, by age groups, by fields of science, by economic activity (NACE Rev.2) and by regions (NUTS 2 level). The periodicity of R&D data is biennial except for the key R&D indicators (R&D expenditure, R&D personnel and Researchers by sectors of performance) which are transmitted annually by the EU Member States on the basis of a legal obligation from 2003 onwards. Some other breakdowns of the data may appear on annual basis based on voluntary data provisions. The data are collected through sample or census surveys, from administrative registers or through a combination of sources. R&D data are available for following countries and country groups: - All EU Member States, plus Candidate Countries, EFTA Countries, the Russian Federation, China, Japan, the United States and South Korea. - Country groups: EU-28, EU-15 and EA-18. R&D data are compiled in accordance to the guidelines laid down in the Proposed standard practice for surveys of research and experimental development - Frascati Manual (FM), OECD, 2002 .

This collection provides users with data concerning R&D expenditure and R&D personnel broken down by following institutional sectors: business enterprise (BES), government (GOV), higher education (HES), private non-profit (PNP) with the total of sectors. All data are broken down by the above mentioned sectors of performance. The R&D expenditure is further broken down by source of funds, by type of costs, by economic activity (NACE Rev.2), by size class, by type of R&D, by fields of science, by socio-economic objectives and by regions (NUTS 2 level). Besides R&D expenditures in basic unit National currency (MIO_NAC) the following units are available: Euro (MIO_EUR), Euro per inhabitant (EUR_HAB) Purchasing Power Standard (MIO_PPS), Purchasing Power Standard at 2005 prices (MIO_PPS_KP05), Purchasing Power Standard per inhabitant at constant 2005 prices (PPS_KP05_HAB), Percentage of GDP (PC_GDP) and Percentage of total R&D expenditure (PC_TOT - for the breakdown by source of funds). R&D personnel data is available in full-time equivalent (FTE), in head count (HC), as a % of employment and as a % of labour force. The data is further broken down by occupation, by qualification, by gender, by size class, by citizenship, by age groups, by fields of science, by economic activity (NACE Rev.2) and by regions (NUTS 2 level). The periodicity of R&D data is biennial except for the key R&D indicators (R&D expenditure, R&D personnel and Researchers by sectors of performance) which are transmitted annually by the EU Member States on the basis of a legal obligation from 2003 onwards. Some other breakdowns of the data may appear on annual basis based on voluntary data provisions. The data are collected through sample or census surveys, from administrative registers or through a combination of sources. R&D data are available for following countries and country groups: - All EU Member States, plus Candidate Countries, EFTA Countries, the Russian Federation, China, Japan, the United States and South Korea. - Country groups: EU-28, EU-15 and EA-18. R&D data are compiled in accordance to the guidelines laid down in the Proposed standard practice for surveys of research and experimental development - Frascati Manual (FM), OECD, 2002 .

This collection provides users with data concerning R&D expenditure and R&D personnel broken down by following institutional sectors: business enterprise (BES), government (GOV), higher education (HES), private non-profit (PNP) with the total of sectors. All data are broken down by the above mentioned sectors of performance. The R&D expenditure is further broken down by source of funds, by type of costs, by economic activity (NACE Rev.2), by size class, by type of R&D, by fields of science, by socio-economic objectives and by regions (NUTS 2 level). Besides R&D expenditures in basic unit National currency (MIO_NAC) the following units are available: Euro (MIO_EUR), Euro per inhabitant (EUR_HAB) Purchasing Power Standard (MIO_PPS), Purchasing Power Standard at 2005 prices (MIO_PPS_KP05), Purchasing Power Standard per inhabitant at constant 2005 prices (PPS_KP05_HAB), Percentage of GDP (PC_GDP) and Percentage of total R&D expenditure (PC_TOT - for the breakdown by source of funds). R&D personnel data is available in full-time equivalent (FTE), in head count (HC), as a % of employment and as a % of labour force. The data is further broken down by occupation, by qualification, by gender, by size class, by citizenship, by age groups, by fields of science, by economic activity (NACE Rev.2) and by regions (NUTS 2 level). The periodicity of R&D data is biennial except for the key R&D indicators (R&D expenditure, R&D personnel and Researchers by sectors of performance) which are transmitted annually by the EU Member States on the basis of a legal obligation from 2003 onwards. Some other breakdowns of the data may appear on annual basis based on voluntary data provisions. The data are collected through sample or census surveys, from administrative registers or through a combination of sources. R&D data are available for following countries and country groups: - All EU Member States, plus Candidate Countries, EFTA Countries, the Russian Federation, China, Japan, the United States and South Korea. - Country groups: EU-28, EU-15 and EA-18. R&D data are compiled in accordance to the guidelines laid down in the Proposed standard practice for surveys of research and experimental development - Frascati Manual (FM), OECD, 2002 .

The focus of this domain is on enlargement countries, in other words the following country groups: candidate countries — Albania (AL), the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)potential candidates — Bosnia and Herzegovina (BA), as well as Kosovo (XK) (*) An extensive range of indicators is presented in this domain, including indicators from almost every theme covered by European statistics. Only annual data are published in this domain. (*) This designation is without prejudice to positions on status and is in line with UNSCR 1244 and the ICJ Opinion on the Kosovo declaration of independence.

Eurostat Dataset Id:cpc_ecnacoi  The focus of this domain is on the following country groups:Acceeding country: Croatia (HR)Candidate countries: the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)Potential candidate countries: Albania (AL), Bosnia and Herzegovina (BA), as well as Kosovo under UNSCR 1244/99 (XK)

Eurostat Dataset Id:cpc_ecbop  The focus of this domain is on the following country groups:Acceeding country: Croatia (HR)Candidate countries: the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)Potential candidate countries: Albania (AL), Bosnia and Herzegovina (BA), as well as Kosovo under UNSCR 1244/99 (XK)

Eurostat Dataset Id:cpc_ecexint  The focus of this domain is on the following country groups:Acceeding country: Croatia (HR)Candidate countries: the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)Potential candidate countries: Albania (AL), Bosnia and Herzegovina (BA), as well as Kosovo under UNSCR 1244/99 (XK)

Eurostat Dataset Id:cpc_ecnagdp  The focus of this domain is on the following country groups:Acceeding country: Croatia (HR)Candidate countries: the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)Potential candidate countries: Albania (AL), Bosnia and Herzegovina (BA), as well as Kosovo under UNSCR 1244/99 (XK)

Eurostat Dataset Id:cpc_ecgov  The focus of this domain is on the following country groups:Acceeding country: Croatia (HR)Candidate countries: the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)Potential candidate countries: Albania (AL), Bosnia and Herzegovina (BA), as well as Kosovo under UNSCR 1244/99 (XK)

Eurostat Dataset Id:cpc_ecmain  The focus of this domain is on the following country groups:Acceeding country: Croatia (HR)Candidate countries: the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)Potential candidate countries: Albania (AL), Bosnia and Herzegovina (BA), as well as Kosovo under UNSCR 1244/99 (XK)

The focus of this domain is on enlargement countries, in other words the following country groups: candidate countries — Albania (AL), the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)potential candidates — Bosnia and Herzegovina (BA), as well as Kosovo (XK) (*) An extensive range of indicators is presented in this domain, including indicators from almost every theme covered by European statistics. Only annual data are published in this domain. (*) This designation is without prejudice to positions on status and is in line with UNSCR 1244 and the ICJ Opinion on the Kosovo declaration of independence.

The focus of this domain is on enlargement countries, in other words the following country groups: candidate countries — Albania (AL), the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)potential candidates — Bosnia and Herzegovina (BA), as well as Kosovo (XK) (*) An extensive range of indicators is presented in this domain, including indicators from almost every theme covered by European statistics. Only annual data are published in this domain. (*) This designation is without prejudice to positions on status and is in line with UNSCR 1244 and the ICJ Opinion on the Kosovo declaration of independence.

Eurostat Dataset Id:cpc_siecr  The focus of this domain is on the following country groups:Acceeding country: Croatia (HR)Candidate countries: the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)Potential candidate countries: Albania (AL), Bosnia and Herzegovina (BA), as well as Kosovo under UNSCR 1244/99 (XK)

Eurostat Dataset Id:cpc_sigeb  The focus of this domain is on the following country groups:Acceeding country: Croatia (HR)Candidate countries: the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)Potential candidate countries: Albania (AL), Bosnia and Herzegovina (BA), as well as Kosovo under UNSCR 1244/99 (XK)

20.1. Source data

CLIs are calculated for 33 OECD countries (Iceland is not included), 6 non-member economies and 8 zone aggregates. A country CLI comprises a set of component series selected from a wide range of key short-term economic indicators. CLIs, reference series data (see below) and standardised business and consumer confidence indicators are presented in various forms. For further information on interpretation and comparability of various form please refer to the presentation section of the OECD CLI methodology document: http://www.oecd.org/std/leading-indicators/41629509.pdf. The composite leading indicator is a times series, formed by aggregating a variety of component indicators which show a reasonably consistent relationship with a reference series (e.g. industrial production IIP up to March 2012 and since then the reference series is GDP) at turning points. The OECD CLI is designed to provide qualitative information on short-term economic movements, especially at the turning points, rather than quantitative measures. Therefore, the main message of CLI movements over time is the increase or decrease, rather than the amplitude of the changes. The OECD’s headline indicator is the amplitude adjusted CLI. In practice, turning points in the de-trended reference series have been found about 4 to 8 months (on average) after the signals of turning points had been detected in the headline CLI. The full list of component series used in the calculation of each country's CLI is available on the OECD website at: http://www.oecd.org/std/leading-indicators/oecdcompositeleadingindicatorsreferenceturningpointsandcomponentseries.htm . Detailed information on the OECD methodology for CLIs can be found on the OECD website at http://stats.oecd.org/mei/default.asp?rev=2 .

Global growth is forecast at 3.5 percent in 2015 and 3.8 percent in 2016, with uneven prospects across the main countries and regions of the world. The distribution of risks to near-term global growth has become more balanced relative to the October World Economic Outlook but is still tilted to the downside. The decline in oil prices could boost activity more than expected. Geopolitical tensions continue to pose threats, and risks of disruptive shifts in asset prices remain relevant. In some advanced economies, protracted low inflation or deflation also pose risks to activity. The chapter takes a region-by-region look at the recent development in the world economy and the outlook for 2015, with particular attention to notable development in countries within each region.

Country Risk Assessment Database, 2012. Source: Multiple Sources - EuroStat, WB, IMF, OECD, UNCTAD

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services (ITS), a component of BoP current account, are used, alongside with data on Foreign Direct Investment (a component of BoP financial account), to monitor the external commercial performance of different economies. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports. Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU and in millions of national currency. Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services (ITS), a component of BoP current account, are used, alongside with data on Foreign Direct Investment (a component of BoP financial account), to monitor the external commercial performance of different economies. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports. Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU and in millions of national currency. Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services (ITS), a component of BoP current account, are used, alongside with data on Foreign Direct Investment (a component of BoP financial account), to monitor the external commercial performance of different economies. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports. Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU and in millions of national currency. Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services (ITS), a component of BoP current account, are used, alongside with data on Foreign Direct Investment (a component of BoP financial account), to monitor the external commercial performance of different economies. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports. Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU and in millions of national currency. Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services (ITS), a component of BoP current account, are used, alongside with data on Foreign Direct Investment (a component of BoP financial account), to monitor the external commercial performance of different economies. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports. Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU and in millions of national currency. Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.

Euro-zone series: Until December 1998 it is an aggregate of interbank deposit bid rates weighted by country GDP (Gross Domestic Product). Thereafter the rate is the EONIA (Euro OverNight Index Average), the effective overnight reference rate for the euro, computed as a weighted average of all overnight unsecured lending transactions in the interbank market, initiated within the euro area by the contributing panel banks. EONIA is computed with the help of the European Central Bank. EU15 series: Until December 1998, this is a theoretical rate based on an aggregation of day-to-day rates weighted by country GDP. Thereafter the rate is an average of the EONIA and the rates of the non-euro-zone countries, weighted by country GDP. National series: broadly speaking, these are day-to-day interbank rates. Source: European Central Bank.

Eurostat uses as a base for its work the OECD Benchmark Definition of Foreign Direct Investment Third Edition, a detailed operational definition fully consistent with the IMF Balance of Payments Manual, Fifth Edition, BPM5. Foreign direct investment (FDI) is the category of international investment made by an entity resident in one economy (direct investor) to acquire a lasting interest in an enterprise operating in another economy (direct investment enterprise). The lasting interest is deemed to exist if the direct investor acquires at least 10% of the voting power of the direct investment enterprise. FDI statistics record separately: 1) Inward FDI (or FDI in the reporting economy), namely investment by foreigners in enterprises resident in the reporting economy. 2) Outward FDI (or FDIabroad), namely investment by residents entities in affiliated enterprises abroad. FDI statistics record both the initial investment and all subsequent investment made by the direct investor, either in the form of equity capital, or in the form of loans, or in the form of reinvesting earnings. Investment made through other affiliated enterprises of the same group of the direct investor should also be recorded according to the international methodology. There are three main indicators: FDI flows, stocks and income. The indicators described in more detail below are presented in the complete tables with a breakdown by partner country or region and a breakdown by the kind of activity in which FDI is made. In the table called "Main indicators" there is a reduced breakdown by partners and data for total activity only. See the part on classification system for more detail. See also the User's guideon the structure on the database and for practical information on data downloading. 1) FDI flows denote the new investment made during the period. FDI flows are recorded in the Balance of Payments financial account. Total FDI flows are broken down by kind of instrument used for making the investment: Equity capital comprises equity in branches, all shares in subsidiaries and associates (except non-participating, preferred shares that are treated as debt securities and are included under other FDI capital) and other contributions such as the provision of machinery. Reinvested earnings consist of the direct investor's share (in proportion to equity participation) of earnings not distributed by the direct investment enterprise. Reinvested earnings are an imputed transaction. Reinvested earnings are also recorded with opposite sign among FDI income (see below). This recording represents not distributed income as being earned by the direct investor and reinvested in the direct investment enterprise at the same time. Other FDI capital (loans) covers the borrowing and lending of funds, including debt securities and trade credits between direct investors and direct investment enterprises. Debt transactions between affiliated financial intermediaries recorded under direct investment flows are limited to permanent debt. 2) FDI stocks (or positions) denote the value of the investment at the end of the period. FDI stocks are recorded in the International Investment Position. Outward FDI stocks are recorded as assets of the reporting economy, inward FDI stocks as liabilities. Similarly with flows, FDI stocks are broken down by kind of instrument. However, there are only two categories instead of three: Equity capital and reinvested earnings is the value of the own capital of the enterprise, including the value of own reserves that are accumulated from past reinvested earnings. Reserves corresponding to reinvested earnings are not shown separately from other equity capital as in the case of flows. Other FDI capital is the stock of debts (assets or liabilities) between the direct investors and the direct investment enterprise. 3) FDI income is the income accruing to direct investors during the period. FDI income is recorded in the current account of the Balance of Payments. Total FDI income is broken down by kind of income. The categories of FDI income available are linked to the breakdown of FDI flows and stocks by kind of instrument, namely: Dividends Dividends payable in the period and branch profits remitted to the direct investor, gross of any withholding taxes. Dividends include payments due on common and preferred shares. Reinvested earnings See definition under FDI flows. Interest on loans Interest accrued in the period on loans (other FDI capital) with affiliated enterprises, gross of any withholding tax. 4) FDI intensity Out of FDI annual data, an indicator useful to measure EU market integration is also calculated and disseminated in the domain Structural Indicators: FDI intensity as % of GDP: Average of inward and outward FDI flows divided by GDP. A higher index indicates higher new FDI during the period in relation to the size of the economy as measured by GDP. If this index increases over time, then the country/zone is becoming more integrated with the international economy.

Eurostat uses as a base for its work the OECD Benchmark Definition of Foreign Direct Investment Third Edition, a detailed operational definition fully consistent with the IMF Balance of Payments Manual, Fifth Edition, BPM5. Foreign direct investment (FDI) is the category of international investment made by an entity resident in one economy (direct investor) to acquire a lasting interest in an enterprise operating in another economy (direct investment enterprise). The lasting interest is deemed to exist if the direct investor acquires at least 10% of the voting power of the direct investment enterprise. FDI statistics record separately: 1) Inward FDI (or FDI in the reporting economy), namely investment by foreigners in enterprises resident in the reporting economy. 2) Outward FDI (or FDIabroad), namely investment by residents entities in affiliated enterprises abroad. FDI statistics record both the initial investment and all subsequent investment made by the direct investor, either in the form of equity capital, or in the form of loans, or in the form of reinvesting earnings. Investment made through other affiliated enterprises of the same group of the direct investor should also be recorded according to the international methodology. There are three main indicators: FDI flows, stocks and income. The indicators described in more detail below are presented in the complete tables with a breakdown by partner country or region and a breakdown by the kind of activity in which FDI is made. In the table called "Main indicators" there is a reduced breakdown by partners and data for total activity only. See the part on classification system for more detail. See also the User's guideon the structure on the database and for practical information on data downloading. 1) FDI flows denote the new investment made during the period. FDI flows are recorded in the Balance of Payments financial account. Total FDI flows are broken down by kind of instrument used for making the investment: Equity capital comprises equity in branches, all shares in subsidiaries and associates (except non-participating, preferred shares that are treated as debt securities and are included under other FDI capital) and other contributions such as the provision of machinery. Reinvested earnings consist of the direct investor's share (in proportion to equity participation) of earnings not distributed by the direct investment enterprise. Reinvested earnings are an imputed transaction. Reinvested earnings are also recorded with opposite sign among FDI income (see below). This recording represents not distributed income as being earned by the direct investor and reinvested in the direct investment enterprise at the same time. Other FDI capital (loans) covers the borrowing and lending of funds, including debt securities and trade credits between direct investors and direct investment enterprises. Debt transactions between affiliated financial intermediaries recorded under direct investment flows are limited to permanent debt. 2) FDI stocks (or positions) denote the value of the investment at the end of the period. FDI stocks are recorded in the International Investment Position. Outward FDI stocks are recorded as assets of the reporting economy, inward FDI stocks as liabilities. Similarly with flows, FDI stocks are broken down by kind of instrument. However, there are only two categories instead of three: Equity capital and reinvested earnings is the value of the own capital of the enterprise, including the value of own reserves that are accumulated from past reinvested earnings. Reserves corresponding to reinvested earnings are not shown separately from other equity capital as in the case of flows. Other FDI capital is the stock of debts (assets or liabilities) between the direct investors and the direct investment enterprise. 3) FDI income is the income accruing to direct investors during the period. FDI income is recorded in the current account of the Balance of Payments. Total FDI income is broken down by kind of income. The categories of FDI income available are linked to the breakdown of FDI flows and stocks by kind of instrument, namely: Dividends Dividends payable in the period and branch profits remitted to the direct investor, gross of any withholding taxes. Dividends include payments due on common and preferred shares. Reinvested earnings See definition under FDI flows. Interest on loans Interest accrued in the period on loans (other FDI capital) with affiliated enterprises, gross of any withholding tax. 4) FDI intensity Out of FDI annual data, an indicator useful to measure EU market integration is also calculated and disseminated in the domain Structural Indicators: FDI intensity as % of GDP: Average of inward and outward FDI flows divided by GDP. A higher index indicates higher new FDI during the period in relation to the size of the economy as measured by GDP. If this index increases over time, then the country/zone is becoming more integrated with the international economy.

Eurostat uses as a base for its work the OECD Benchmark Definition of Foreign Direct Investment Third Edition, a detailed operational definition fully consistent with the IMF Balance of Payments Manual, Fifth Edition, BPM5. Foreign direct investment (FDI) is the category of international investment made by an entity resident in one economy (direct investor) to acquire a lasting interest in an enterprise operating in another economy (direct investment enterprise). The lasting interest is deemed to exist if the direct investor acquires at least 10% of the voting power of the direct investment enterprise. FDI statistics record separately: 1) Inward FDI (or FDI in the reporting economy), namely investment by foreigners in enterprises resident in the reporting economy. 2) Outward FDI (or FDIabroad), namely investment by residents entities in affiliated enterprises abroad. FDI statistics record both the initial investment and all subsequent investment made by the direct investor, either in the form of equity capital, or in the form of loans, or in the form of reinvesting earnings. Investment made through other affiliated enterprises of the same group of the direct investor should also be recorded according to the international methodology. There are three main indicators: FDI flows, stocks and income. The indicators described in more detail below are presented in the complete tables with a breakdown by partner country or region and a breakdown by the kind of activity in which FDI is made. In the table called "Main indicators" there is a reduced breakdown by partners and data for total activity only. See the part on classification system for more detail. See also the User's guideon the structure on the database and for practical information on data downloading. 1) FDI flows denote the new investment made during the period. FDI flows are recorded in the Balance of Payments financial account. Total FDI flows are broken down by kind of instrument used for making the investment: Equity capital comprises equity in branches, all shares in subsidiaries and associates (except non-participating, preferred shares that are treated as debt securities and are included under other FDI capital) and other contributions such as the provision of machinery. Reinvested earnings consist of the direct investor's share (in proportion to equity participation) of earnings not distributed by the direct investment enterprise. Reinvested earnings are an imputed transaction. Reinvested earnings are also recorded with opposite sign among FDI income (see below). This recording represents not distributed income as being earned by the direct investor and reinvested in the direct investment enterprise at the same time. Other FDI capital (loans) covers the borrowing and lending of funds, including debt securities and trade credits between direct investors and direct investment enterprises. Debt transactions between affiliated financial intermediaries recorded under direct investment flows are limited to permanent debt. 2) FDI stocks (or positions) denote the value of the investment at the end of the period. FDI stocks are recorded in the International Investment Position. Outward FDI stocks are recorded as assets of the reporting economy, inward FDI stocks as liabilities. Similarly with flows, FDI stocks are broken down by kind of instrument. However, there are only two categories instead of three: Equity capital and reinvested earnings is the value of the own capital of the enterprise, including the value of own reserves that are accumulated from past reinvested earnings. Reserves corresponding to reinvested earnings are not shown separately from other equity capital as in the case of flows. Other FDI capital is the stock of debts (assets or liabilities) between the direct investors and the direct investment enterprise. 3) FDI income is the income accruing to direct investors during the period. FDI income is recorded in the current account of the Balance of Payments. Total FDI income is broken down by kind of income. The categories of FDI income available are linked to the breakdown of FDI flows and stocks by kind of instrument, namely: Dividends Dividends payable in the period and branch profits remitted to the direct investor, gross of any withholding taxes. Dividends include payments due on common and preferred shares. Reinvested earnings See definition under FDI flows. Interest on loans Interest accrued in the period on loans (other FDI capital) with affiliated enterprises, gross of any withholding tax. 4) FDI intensity Out of FDI annual data, an indicator useful to measure EU market integration is also calculated and disseminated in the domain Structural Indicators: FDI intensity as % of GDP: Average of inward and outward FDI flows divided by GDP. A higher index indicates higher new FDI during the period in relation to the size of the economy as measured by GDP. If this index increases over time, then the country/zone is becoming more integrated with the international economy.

Eurostat uses as a base for its work the OECD Benchmark Definition of Foreign Direct Investment Third Edition, a detailed operational definition fully consistent with the IMF Balance of Payments Manual, Fifth Edition, BPM5. Foreign direct investment (FDI) is the category of international investment made by an entity resident in one economy (direct investor) to acquire a lasting interest in an enterprise operating in another economy (direct investment enterprise). The lasting interest is deemed to exist if the direct investor acquires at least 10% of the voting power of the direct investment enterprise. FDI statistics record separately: 1) Inward FDI (or FDI in the reporting economy), namely investment by foreigners in enterprises resident in the reporting economy. 2) Outward FDI (or FDIabroad), namely investment by residents entities in affiliated enterprises abroad. FDI statistics record both the initial investment and all subsequent investment made by the direct investor, either in the form of equity capital, or in the form of loans, or in the form of reinvesting earnings. Investment made through other affiliated enterprises of the same group of the direct investor should also be recorded according to the international methodology. There are three main indicators: FDI flows, stocks and income. The indicators described in more detail below are presented in the complete tables with a breakdown by partner country or region and a breakdown by the kind of activity in which FDI is made. In the table called "Main indicators" there is a reduced breakdown by partners and data for total activity only. See the part on classification system for more detail. See also the User's guideon the structure on the database and for practical information on data downloading. 1) FDI flows denote the new investment made during the period. FDI flows are recorded in the Balance of Payments financial account. Total FDI flows are broken down by kind of instrument used for making the investment: Equity capital comprises equity in branches, all shares in subsidiaries and associates (except non-participating, preferred shares that are treated as debt securities and are included under other FDI capital) and other contributions such as the provision of machinery. Reinvested earnings consist of the direct investor's share (in proportion to equity participation) of earnings not distributed by the direct investment enterprise. Reinvested earnings are an imputed transaction. Reinvested earnings are also recorded with opposite sign among FDI income (see below). This recording represents not distributed income as being earned by the direct investor and reinvested in the direct investment enterprise at the same time. Other FDI capital (loans) covers the borrowing and lending of funds, including debt securities and trade credits between direct investors and direct investment enterprises. Debt transactions between affiliated financial intermediaries recorded under direct investment flows are limited to permanent debt. 2) FDI stocks (or positions) denote the value of the investment at the end of the period. FDI stocks are recorded in the International Investment Position. Outward FDI stocks are recorded as assets of the reporting economy, inward FDI stocks as liabilities. Similarly with flows, FDI stocks are broken down by kind of instrument. However, there are only two categories instead of three: Equity capital and reinvested earnings is the value of the own capital of the enterprise, including the value of own reserves that are accumulated from past reinvested earnings. Reserves corresponding to reinvested earnings are not shown separately from other equity capital as in the case of flows. Other FDI capital is the stock of debts (assets or liabilities) between the direct investors and the direct investment enterprise. 3) FDI income is the income accruing to direct investors during the period. FDI income is recorded in the current account of the Balance of Payments. Total FDI income is broken down by kind of income. The categories of FDI income available are linked to the breakdown of FDI flows and stocks by kind of instrument, namely: Dividends Dividends payable in the period and branch profits remitted to the direct investor, gross of any withholding taxes. Dividends include payments due on common and preferred shares. Reinvested earnings See definition under FDI flows. Interest on loans Interest accrued in the period on loans (other FDI capital) with affiliated enterprises, gross of any withholding tax. 4) FDI intensity Out of FDI annual data, an indicator useful to measure EU market integration is also calculated and disseminated in the domain Structural Indicators: FDI intensity as % of GDP: Average of inward and outward FDI flows divided by GDP. A higher index indicates higher new FDI during the period in relation to the size of the economy as measured by GDP. If this index increases over time, then the country/zone is becoming more integrated with the international economy.

Eurostat uses as a base for its work the OECD Benchmark Definition of Foreign Direct Investment Third Edition, a detailed operational definition fully consistent with the IMF Balance of Payments Manual, Fifth Edition, BPM5. Foreign direct investment (FDI) is the category of international investment made by an entity resident in one economy (direct investor) to acquire a lasting interest in an enterprise operating in another economy (direct investment enterprise). The lasting interest is deemed to exist if the direct investor acquires at least 10% of the voting power of the direct investment enterprise. FDI statistics record separately: 1) Inward FDI (or FDI in the reporting economy), namely investment by foreigners in enterprises resident in the reporting economy. 2) Outward FDI (or FDIabroad), namely investment by residents entities in affiliated enterprises abroad. FDI statistics record both the initial investment and all subsequent investment made by the direct investor, either in the form of equity capital, or in the form of loans, or in the form of reinvesting earnings. Investment made through other affiliated enterprises of the same group of the direct investor should also be recorded according to the international methodology. There are three main indicators: FDI flows, stocks and income. The indicators described in more detail below are presented in the complete tables with a breakdown by partner country or region and a breakdown by the kind of activity in which FDI is made. In the table called "Main indicators" there is a reduced breakdown by partners and data for total activity only. See the part on classification system for more detail. See also the User's guideon the structure on the database and for practical information on data downloading. 1) FDI flows denote the new investment made during the period. FDI flows are recorded in the Balance of Payments financial account. Total FDI flows are broken down by kind of instrument used for making the investment: Equity capital comprises equity in branches, all shares in subsidiaries and associates (except non-participating, preferred shares that are treated as debt securities and are included under other FDI capital) and other contributions such as the provision of machinery. Reinvested earnings consist of the direct investor's share (in proportion to equity participation) of earnings not distributed by the direct investment enterprise. Reinvested earnings are an imputed transaction. Reinvested earnings are also recorded with opposite sign among FDI income (see below). This recording represents not distributed income as being earned by the direct investor and reinvested in the direct investment enterprise at the same time. Other FDI capital (loans) covers the borrowing and lending of funds, including debt securities and trade credits between direct investors and direct investment enterprises. Debt transactions between affiliated financial intermediaries recorded under direct investment flows are limited to permanent debt. 2) FDI stocks (or positions) denote the value of the investment at the end of the period. FDI stocks are recorded in the International Investment Position. Outward FDI stocks are recorded as assets of the reporting economy, inward FDI stocks as liabilities. Similarly with flows, FDI stocks are broken down by kind of instrument. However, there are only two categories instead of three: Equity capital and reinvested earnings is the value of the own capital of the enterprise, including the value of own reserves that are accumulated from past reinvested earnings. Reserves corresponding to reinvested earnings are not shown separately from other equity capital as in the case of flows. Other FDI capital is the stock of debts (assets or liabilities) between the direct investors and the direct investment enterprise. 3) FDI income is the income accruing to direct investors during the period. FDI income is recorded in the current account of the Balance of Payments. Total FDI income is broken down by kind of income. The categories of FDI income available are linked to the breakdown of FDI flows and stocks by kind of instrument, namely: Dividends Dividends payable in the period and branch profits remitted to the direct investor, gross of any withholding taxes. Dividends include payments due on common and preferred shares. Reinvested earnings See definition under FDI flows. Interest on loans Interest accrued in the period on loans (other FDI capital) with affiliated enterprises, gross of any withholding tax. 4) FDI intensity Out of FDI annual data, an indicator useful to measure EU market integration is also calculated and disseminated in the domain Structural Indicators: FDI intensity as % of GDP: Average of inward and outward FDI flows divided by GDP. A higher index indicates higher new FDI during the period in relation to the size of the economy as measured by GDP. If this index increases over time, then the country/zone is becoming more integrated with the international economy.

Eurostat uses as a base for its work the OECD Benchmark Definition of Foreign Direct Investment Third Edition, a detailed operational definition fully consistent with the IMF Balance of Payments Manual, Fifth Edition, BPM5. Foreign direct investment (FDI) is the category of international investment made by an entity resident in one economy (direct investor) to acquire a lasting interest in an enterprise operating in another economy (direct investment enterprise). The lasting interest is deemed to exist if the direct investor acquires at least 10% of the voting power of the direct investment enterprise. FDI statistics record separately: 1) Inward FDI (or FDI in the reporting economy), namely investment by foreigners in enterprises resident in the reporting economy. 2) Outward FDI (or FDIabroad), namely investment by residents entities in affiliated enterprises abroad. FDI statistics record both the initial investment and all subsequent investment made by the direct investor, either in the form of equity capital, or in the form of loans, or in the form of reinvesting earnings. Investment made through other affiliated enterprises of the same group of the direct investor should also be recorded according to the international methodology. There are three main indicators: FDI flows, stocks and income. The indicators described in more detail below are presented in the complete tables with a breakdown by partner country or region and a breakdown by the kind of activity in which FDI is made. In the table called "Main indicators" there is a reduced breakdown by partners and data for total activity only. See the part on classification system for more detail. See also the User's guideon the structure on the database and for practical information on data downloading. 1) FDI flows denote the new investment made during the period. FDI flows are recorded in the Balance of Payments financial account. Total FDI flows are broken down by kind of instrument used for making the investment: Equity capital comprises equity in branches, all shares in subsidiaries and associates (except non-participating, preferred shares that are treated as debt securities and are included under other FDI capital) and other contributions such as the provision of machinery. Reinvested earnings consist of the direct investor's share (in proportion to equity participation) of earnings not distributed by the direct investment enterprise. Reinvested earnings are an imputed transaction. Reinvested earnings are also recorded with opposite sign among FDI income (see below). This recording represents not distributed income as being earned by the direct investor and reinvested in the direct investment enterprise at the same time. Other FDI capital (loans) covers the borrowing and lending of funds, including debt securities and trade credits between direct investors and direct investment enterprises. Debt transactions between affiliated financial intermediaries recorded under direct investment flows are limited to permanent debt. 2) FDI stocks (or positions) denote the value of the investment at the end of the period. FDI stocks are recorded in the International Investment Position. Outward FDI stocks are recorded as assets of the reporting economy, inward FDI stocks as liabilities. Similarly with flows, FDI stocks are broken down by kind of instrument. However, there are only two categories instead of three: Equity capital and reinvested earnings is the value of the own capital of the enterprise, including the value of own reserves that are accumulated from past reinvested earnings. Reserves corresponding to reinvested earnings are not shown separately from other equity capital as in the case of flows. Other FDI capital is the stock of debts (assets or liabilities) between the direct investors and the direct investment enterprise. 3) FDI income is the income accruing to direct investors during the period. FDI income is recorded in the current account of the Balance of Payments. Total FDI income is broken down by kind of income. The categories of FDI income available are linked to the breakdown of FDI flows and stocks by kind of instrument, namely: Dividends Dividends payable in the period and branch profits remitted to the direct investor, gross of any withholding taxes. Dividends include payments due on common and preferred shares. Reinvested earnings See definition under FDI flows. Interest on loans Interest accrued in the period on loans (other FDI capital) with affiliated enterprises, gross of any withholding tax. 4) FDI intensity Out of FDI annual data, an indicator useful to measure EU market integration is also calculated and disseminated in the domain Structural Indicators: FDI intensity as % of GDP: Average of inward and outward FDI flows divided by GDP. A higher index indicates higher new FDI during the period in relation to the size of the economy as measured by GDP. If this index increases over time, then the country/zone is becoming more integrated with the international economy.

20.1. Source data

The source for the regional labour market information down to NUTS level 2 is the EU Labour Force Survey (EU-LFS). This is a quarterly household sample survey conducted in all Member States of the EU and in EFTA and Candidate countries.  The EU-LFS survey follows the definitions and recommendations of the International Labour Organisation (ILO). To achieve further harmonisation, the Member States also adhere to common principles when formulating questionnaires. The LFS' target population is made up of all persons in private households aged 15 and over. For more information see the EU Labour Force Survey (lfsi_esms, see paragraph 21.1.).  The EU-LFS is designed to give accurate quarterly information at national level as well as annual information at NUTS 2 regional level and the compilation of these figures is well specified in the regulation. Microdata including the NUTS 2 level codes are provided by all the participating countries with a good degree of geographical comparability, which allows the production and dissemination of a complete set of comparable indicators for this territorial level. At present the transmission of the regional labour market data at NUTS 3 level has no legal basis. However many countries transmit NUTS 3 figures to Eurostat on a voluntary basis, under the understanding that they are not for publication with such detail, but for aggregation in few categories per country, i.e., metropolitan regions and urban-rural typology. Most of the NUTS 3 data are based on the LFS while some countries transmit data based on registers, administrative data, small area estimation and other reliable sources.

The OECD Long Term Baseline analyzes the major economic trends beyond the OECD short-term projections. For all OECD economies, and the major non-OECD economies, it provides coverage of components of potential growth, fiscal balances and debt accumulation, domestic saving and investment balances, and external balances (through the current account). It also includes interest rates consistent with those projections. The database contains annual data to 2060. Variables are defined in such a way that they are as homogenous as possible for the countries covered. Breaks in underlying series are corrected as far as possible. Sources for the historical data are publications of national statistical agencies and OECD statistical publications such as the Annual National Accounts, the International Monetary Fund, the United Nations, and Eurostat.

The section 'LFS series - detailed quarterly survey results' reports detailed quarterly results going beyond the EU-LFS main aggregates, which have a separate data domain and some methodological differences. This data collection covers all main labour market characteristics, i.e. the total population, activity and activity rates, employment, employment rates, self employed, employees, temporary employment, full-time and part-time employment, population in employment having a second job, working time, total unemployment and inactivity. General information on the EU-LFS can be found in the ESMS page for 'Employment and unemployment (LFS)', see link in related metada. Detailed information on the main features, the legal basis, the methodology and the data as well as on the historical development of the EU-LFS is available on the EU-LFS (Statistics Explained) webpage.

The section 'LFS series - detailed annual survey results' reports annual results from the EU-LFS. While LFS is a quarterly survey, it is also possible to produce annual results. There are several ways of doing it, see section '20.5 Data compilation' below for details. This data collection covers all main labour market characteristics, i.e. the total population, activity and activity rates, employment, employment rates, self employed, employees, temporary employment, full-time and part-time employment, population in employment having a second job, working time, total unemployment and inactivity. General information on the EU-LFS can be found in the ESMS page for 'Employment and unemployment (LFS)', see link in related metada. Detailed information on the main features, the legal basis, the methodology and the data as well as on the historical development of the EU-LFS is available on the EU-LFS (Statistics Explained) webpage.

The section 'LFS series - detailed quarterly survey results' reports detailed quarterly results going beyond the EU-LFS main aggregates, which have a separate data domain and some methodological differences. This data collection covers all main labour market characteristics, i.e. the total population, activity and activity rates, employment, employment rates, self employed, employees, temporary employment, full-time and part-time employment, population in employment having a second job, working time, total unemployment and inactivity. General information on the EU-LFS can be found in the ESMS page for 'Employment and unemployment (LFS)', see link in related metada. Detailed information on the main features, the legal basis, the methodology and the data as well as on the historical development of the EU-LFS is available on the EU-LFS (Statistics Explained) webpage.

In 2011, the European Union Labour Force Survey (EU-LFS) included an ad hoc module (AHM) on employment of disabled people. The module consisted of 11 variables dealing with: Health problems and difficulties in basic activities;Limitations in work caused by health problems/difficulties in basic activities;Special assistance needed or used by people with health problems/difficulties in basic activities;Limitation in work because of other reasons. On the basis of how the module was operationalised, the following two main definitions for disability were considered for presenting the results: Disabled persons = People having a basic activity difficulty (such as seeing, hearing, walking, communicating);Disabled persons = People having a work limitation caused by a longstanding health condition and/or a basic activity difficulty. 32 countries have implemented this module: the EU 28 Member States plus Turkey, Iceland, Norway and Switzerland. The Norwegian data are not disseminated because the AHM questionnaire in Norway only partly complies with the Commission Regulation (EU) No 317/2010 and consequently, the data are incomplete and partly comparable. Missing values, don't know and refusal answers are not considered in the calculations. It means the indicators have been worked out on the respondents and validated answers only.

20.1. Source data

Eurostat uses as a base for its work the OECD Benchmark Definition of Foreign Direct Investment Third Edition, a detailed operational definition fully consistent with the IMF Balance of Payments Manual, Fifth Edition, BPM5. Foreign direct investment (FDI) is the category of international investment made by an entity resident in one economy (direct investor) to acquire a lasting interest in an enterprise operating in another economy (direct investment enterprise). The lasting interest is deemed to exist if the direct investor acquires at least 10% of the voting power of the direct investment enterprise. FDI statistics record separately: 1) Inward FDI (or FDI in the reporting economy), namely investment by foreigners in enterprises resident in the reporting economy. 2) Outward FDI (or FDIabroad), namely investment by residents entities in affiliated enterprises abroad. FDI statistics record both the initial investment and all subsequent investment made by the direct investor, either in the form of equity capital, or in the form of loans, or in the form of reinvesting earnings. Investment made through other affiliated enterprises of the same group of the direct investor should also be recorded according to the international methodology. There are three main indicators: FDI flows, stocks and income. The indicators described in more detail below are presented in the complete tables with a breakdown by partner country or region and a breakdown by the kind of activity in which FDI is made. In the table called "Main indicators" there is a reduced breakdown by partners and data for total activity only. See the part on classification system for more detail. See also the User's guideon the structure on the database and for practical information on data downloading. 1) FDI flows denote the new investment made during the period. FDI flows are recorded in the Balance of Payments financial account. Total FDI flows are broken down by kind of instrument used for making the investment: Equity capital comprises equity in branches, all shares in subsidiaries and associates (except non-participating, preferred shares that are treated as debt securities and are included under other FDI capital) and other contributions such as the provision of machinery. Reinvested earnings consist of the direct investor's share (in proportion to equity participation) of earnings not distributed by the direct investment enterprise. Reinvested earnings are an imputed transaction. Reinvested earnings are also recorded with opposite sign among FDI income (see below). This recording represents not distributed income as being earned by the direct investor and reinvested in the direct investment enterprise at the same time. Other FDI capital (loans) covers the borrowing and lending of funds, including debt securities and trade credits between direct investors and direct investment enterprises. Debt transactions between affiliated financial intermediaries recorded under direct investment flows are limited to permanent debt. 2) FDI stocks (or positions) denote the value of the investment at the end of the period. FDI stocks are recorded in the International Investment Position. Outward FDI stocks are recorded as assets of the reporting economy, inward FDI stocks as liabilities. Similarly with flows, FDI stocks are broken down by kind of instrument. However, there are only two categories instead of three: Equity capital and reinvested earnings is the value of the own capital of the enterprise, including the value of own reserves that are accumulated from past reinvested earnings. Reserves corresponding to reinvested earnings are not shown separately from other equity capital as in the case of flows. Other FDI capital is the stock of debts (assets or liabilities) between the direct investors and the direct investment enterprise. 3) FDI income is the income accruing to direct investors during the period. FDI income is recorded in the current account of the Balance of Payments. Total FDI income is broken down by kind of income. The categories of FDI income available are linked to the breakdown of FDI flows and stocks by kind of instrument, namely: Dividends Dividends payable in the period and branch profits remitted to the direct investor, gross of any withholding taxes. Dividends include payments due on common and preferred shares. Reinvested earnings See definition under FDI flows. Interest on loans Interest accrued in the period on loans (other FDI capital) with affiliated enterprises, gross of any withholding tax. 4) FDI intensity Out of FDI annual data, an indicator useful to measure EU market integration is also calculated and disseminated in the domain Structural Indicators: FDI intensity as % of GDP: Average of inward and outward FDI flows divided by GDP. A higher index indicates higher new FDI during the period in relation to the size of the economy as measured by GDP. If this index increases over time, then the country/zone is becoming more integrated with the international economy.

Eurostat uses as a base for its work the OECD Benchmark Definition of Foreign Direct Investment Third Edition, a detailed operational definition fully consistent with the IMF Balance of Payments Manual, Fifth Edition, BPM5. Foreign direct investment (FDI) is the category of international investment made by an entity resident in one economy (direct investor) to acquire a lasting interest in an enterprise operating in another economy (direct investment enterprise). The lasting interest is deemed to exist if the direct investor acquires at least 10% of the voting power of the direct investment enterprise. FDI statistics record separately: 1) Inward FDI (or FDI in the reporting economy), namely investment by foreigners in enterprises resident in the reporting economy. 2) Outward FDI (or FDIabroad), namely investment by residents entities in affiliated enterprises abroad. FDI statistics record both the initial investment and all subsequent investment made by the direct investor, either in the form of equity capital, or in the form of loans, or in the form of reinvesting earnings. Investment made through other affiliated enterprises of the same group of the direct investor should also be recorded according to the international methodology. There are three main indicators: FDI flows, stocks and income. The indicators described in more detail below are presented in the complete tables with a breakdown by partner country or region and a breakdown by the kind of activity in which FDI is made. In the table called "Main indicators" there is a reduced breakdown by partners and data for total activity only. See the part on classification system for more detail. See also the User's guideon the structure on the database and for practical information on data downloading. 1) FDI flows denote the new investment made during the period. FDI flows are recorded in the Balance of Payments financial account. Total FDI flows are broken down by kind of instrument used for making the investment: Equity capital comprises equity in branches, all shares in subsidiaries and associates (except non-participating, preferred shares that are treated as debt securities and are included under other FDI capital) and other contributions such as the provision of machinery. Reinvested earnings consist of the direct investor's share (in proportion to equity participation) of earnings not distributed by the direct investment enterprise. Reinvested earnings are an imputed transaction. Reinvested earnings are also recorded with opposite sign among FDI income (see below). This recording represents not distributed income as being earned by the direct investor and reinvested in the direct investment enterprise at the same time. Other FDI capital (loans) covers the borrowing and lending of funds, including debt securities and trade credits between direct investors and direct investment enterprises. Debt transactions between affiliated financial intermediaries recorded under direct investment flows are limited to permanent debt. 2) FDI stocks (or positions) denote the value of the investment at the end of the period. FDI stocks are recorded in the International Investment Position. Outward FDI stocks are recorded as assets of the reporting economy, inward FDI stocks as liabilities. Similarly with flows, FDI stocks are broken down by kind of instrument. However, there are only two categories instead of three: Equity capital and reinvested earnings is the value of the own capital of the enterprise, including the value of own reserves that are accumulated from past reinvested earnings. Reserves corresponding to reinvested earnings are not shown separately from other equity capital as in the case of flows. Other FDI capital is the stock of debts (assets or liabilities) between the direct investors and the direct investment enterprise. 3) FDI income is the income accruing to direct investors during the period. FDI income is recorded in the current account of the Balance of Payments. Total FDI income is broken down by kind of income. The categories of FDI income available are linked to the breakdown of FDI flows and stocks by kind of instrument, namely: Dividends Dividends payable in the period and branch profits remitted to the direct investor, gross of any withholding taxes. Dividends include payments due on common and preferred shares. Reinvested earnings See definition under FDI flows. Interest on loans Interest accrued in the period on loans (other FDI capital) with affiliated enterprises, gross of any withholding tax. 4) FDI intensity Out of FDI annual data, an indicator useful to measure EU market integration is also calculated and disseminated in the domain Structural Indicators: FDI intensity as % of GDP: Average of inward and outward FDI flows divided by GDP. A higher index indicates higher new FDI during the period in relation to the size of the economy as measured by GDP. If this index increases over time, then the country/zone is becoming more integrated with the international economy.

Eurostat uses as a base for its work the OECD Benchmark Definition of Foreign Direct Investment Third Edition, a detailed operational definition fully consistent with the IMF Balance of Payments Manual, Fifth Edition, BPM5. Foreign direct investment (FDI) is the category of international investment made by an entity resident in one economy (direct investor) to acquire a lasting interest in an enterprise operating in another economy (direct investment enterprise). The lasting interest is deemed to exist if the direct investor acquires at least 10% of the voting power of the direct investment enterprise. FDI statistics record separately: 1) Inward FDI (or FDI in the reporting economy), namely investment by foreigners in enterprises resident in the reporting economy. 2) Outward FDI (or FDIabroad), namely investment by residents entities in affiliated enterprises abroad. FDI statistics record both the initial investment and all subsequent investment made by the direct investor, either in the form of equity capital, or in the form of loans, or in the form of reinvesting earnings. Investment made through other affiliated enterprises of the same group of the direct investor should also be recorded according to the international methodology. There are three main indicators: FDI flows, stocks and income. The indicators described in more detail below are presented in the complete tables with a breakdown by partner country or region and a breakdown by the kind of activity in which FDI is made. In the table called "Main indicators" there is a reduced breakdown by partners and data for total activity only. See the part on classification system for more detail. See also the User's guideon the structure on the database and for practical information on data downloading. 1) FDI flows denote the new investment made during the period. FDI flows are recorded in the Balance of Payments financial account. Total FDI flows are broken down by kind of instrument used for making the investment: Equity capital comprises equity in branches, all shares in subsidiaries and associates (except non-participating, preferred shares that are treated as debt securities and are included under other FDI capital) and other contributions such as the provision of machinery. Reinvested earnings consist of the direct investor's share (in proportion to equity participation) of earnings not distributed by the direct investment enterprise. Reinvested earnings are an imputed transaction. Reinvested earnings are also recorded with opposite sign among FDI income (see below). This recording represents not distributed income as being earned by the direct investor and reinvested in the direct investment enterprise at the same time. Other FDI capital (loans) covers the borrowing and lending of funds, including debt securities and trade credits between direct investors and direct investment enterprises. Debt transactions between affiliated financial intermediaries recorded under direct investment flows are limited to permanent debt. 2) FDI stocks (or positions) denote the value of the investment at the end of the period. FDI stocks are recorded in the International Investment Position. Outward FDI stocks are recorded as assets of the reporting economy, inward FDI stocks as liabilities. Similarly with flows, FDI stocks are broken down by kind of instrument. However, there are only two categories instead of three: Equity capital and reinvested earnings is the value of the own capital of the enterprise, including the value of own reserves that are accumulated from past reinvested earnings. Reserves corresponding to reinvested earnings are not shown separately from other equity capital as in the case of flows. Other FDI capital is the stock of debts (assets or liabilities) between the direct investors and the direct investment enterprise. 3) FDI income is the income accruing to direct investors during the period. FDI income is recorded in the current account of the Balance of Payments. Total FDI income is broken down by kind of income. The categories of FDI income available are linked to the breakdown of FDI flows and stocks by kind of instrument, namely: Dividends Dividends payable in the period and branch profits remitted to the direct investor, gross of any withholding taxes. Dividends include payments due on common and preferred shares. Reinvested earnings See definition under FDI flows. Interest on loans Interest accrued in the period on loans (other FDI capital) with affiliated enterprises, gross of any withholding tax. 4) FDI intensity Out of FDI annual data, an indicator useful to measure EU market integration is also calculated and disseminated in the domain Structural Indicators: FDI intensity as % of GDP: Average of inward and outward FDI flows divided by GDP. A higher index indicates higher new FDI during the period in relation to the size of the economy as measured by GDP. If this index increases over time, then the country/zone is becoming more integrated with the international economy.

The Balance of Payments (BOP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of an economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, primary and secondary income), as well as on transactions which fall in the capital and the financial account. International investment position presents value of financial assets owned outside the economy and indebtedness of the economy to the rest of the world. BOP is an important macro-economic indicator used to assess the position of an economy (of credit or debit for current and capital acount, net acquisition of financial assets or net incurrence of liabilities for BOP financial account and international investment position) towards the external world. Out of BOP data, some indicators on international position of the EU and Member States are derived. Indicators on Main Balance of Payments and International Investment Position items as share of GDP are presented as percentage of GDP for given year or quarter and moving average for 3 consecutive years for:balance, credit and debit flows of current and capital accounts and of main current account  items: goods, services, primary and secondary income,net flows, net acquisition of financial assets and net incurrence of liabilities for total financial account and foreign direct investment, international investment position and net external debt at the end of reference quarter or year.   Indicators on export market shares present shares of each EU Member State in total world exports of goods and services for given year, and 1-year and 5-year percentage changes of these shares, as well as shares in OECD exports and 5-year percentage changes of these shares.

Eurostat uses as a base for its work the OECD Benchmark Definition of Foreign Direct Investment Third Edition, a detailed operational definition fully consistent with the IMF Balance of Payments Manual, Fifth Edition, BPM5. Foreign direct investment (FDI) is the category of international investment made by an entity resident in one economy (direct investor) to acquire a lasting interest in an enterprise operating in another economy (direct investment enterprise). The lasting interest is deemed to exist if the direct investor acquires at least 10% of the voting power of the direct investment enterprise. FDI statistics record separately: 1) Inward FDI (or FDI in the reporting economy), namely investment by foreigners in enterprises resident in the reporting economy. 2) Outward FDI (or FDIabroad), namely investment by residents entities in affiliated enterprises abroad. FDI statistics record both the initial investment and all subsequent investment made by the direct investor, either in the form of equity capital, or in the form of loans, or in the form of reinvesting earnings. Investment made through other affiliated enterprises of the same group of the direct investor should also be recorded according to the international methodology. There are three main indicators: FDI flows, stocks and income. The indicators described in more detail below are presented in the complete tables with a breakdown by partner country or region and a breakdown by the kind of activity in which FDI is made. In the table called "Main indicators" there is a reduced breakdown by partners and data for total activity only. See the part on classification system for more detail. See also the User's guideon the structure on the database and for practical information on data downloading. 1) FDI flows denote the new investment made during the period. FDI flows are recorded in the Balance of Payments financial account. Total FDI flows are broken down by kind of instrument used for making the investment:Equity capital comprises equity in branches, all shares in subsidiaries and associates (except non-participating, preferred shares that are treated as debt securities and are included under other FDI capital) and other contributions such as the provision of machinery.Reinvested earnings consist of the direct investor's share (in proportion to equity participation) of earnings not distributed by the direct investment enterprise. Reinvested earnings are an imputed transaction. Reinvested earnings are also recorded with opposite sign among FDI income (see below). This recording represents not distributed income as being earned by the direct investor and reinvested in the direct investment enterprise at the same time.Other FDI capital (loans) covers the borrowing and lending of funds, including debt securities and trade credits between direct investors and direct investment enterprises. Debt transactions between affiliated financial intermediaries recorded under direct investment flows are limited to permanent debt. 2) FDI stocks (or positions) denote the value of the investment at the end of the period. FDI stocks are recorded in the International Investment Position. Outward FDI stocks are recorded as assets of the reporting economy, inward FDI stocks as liabilities. Similarly with flows, FDI stocks are broken down by kind of instrument. However, there are only two categories instead of three:Equity capital and reinvested earnings is the value of the own capital of the enterprise, including the value of own reserves that are accumulated from past reinvested earnings. Reserves corresponding to reinvested earnings are not shown separately from other equity capital as in the case of flows.Other FDI capital is the stock of debts (assets or liabilities) between the direct investors and the direct investment enterprise. 3) FDI income is the income accruing to direct investors during the period. FDI income is recorded in the current account of the Balance of Payments. Total FDI income is broken down by kind of income. The categories of FDI income available are linked to the breakdown of FDI flows and stocks by kind of instrument, namely:Dividends Dividends payable in the period and branch profits remitted to the direct investor, gross of any withholding taxes. Dividends include payments due on common and preferred shares.Reinvested earnings See definition under FDI flows.Interest on loans Interest accrued in the period on loans (other FDI capital) with affiliated enterprises, gross of any withholding tax. 4) FDI intensity Out of FDI annual data, an indicator useful to measure EU market integration is also calculated and disseminated in the domain Structural Indicators:FDI intensity as % of GDP: Average of inward and outward FDI flows divided by GDP. A higher index indicates higher new FDI during the period in relation to the size of the economy as measured by GDP. If this index increases over time, then the country/zone is becoming more integrated with the international economy.

Eurostat uses as a base for its work the OECD Benchmark Definition of Foreign Direct Investment Third Edition, a detailed operational definition fully consistent with the IMF Balance of Payments Manual, Fifth Edition, BPM5. Foreign direct investment (FDI) is the category of international investment made by an entity resident in one economy (direct investor) to acquire a lasting interest in an enterprise operating in another economy (direct investment enterprise). The lasting interest is deemed to exist if the direct investor acquires at least 10% of the voting power of the direct investment enterprise. FDI statistics record separately: 1) Inward FDI (or FDI in the reporting economy), namely investment by foreigners in enterprises resident in the reporting economy. 2) Outward FDI (or FDIabroad), namely investment by residents entities in affiliated enterprises abroad. FDI statistics record both the initial investment and all subsequent investment made by the direct investor, either in the form of equity capital, or in the form of loans, or in the form of reinvesting earnings. Investment made through other affiliated enterprises of the same group of the direct investor should also be recorded according to the international methodology. There are three main indicators: FDI flows, stocks and income. The indicators described in more detail below are presented in the complete tables with a breakdown by partner country or region and a breakdown by the kind of activity in which FDI is made. In the table called "Main indicators" there is a reduced breakdown by partners and data for total activity only. See the part on classification system for more detail. See also the User's guideon the structure on the database and for practical information on data downloading. 1) FDI flows denote the new investment made during the period. FDI flows are recorded in the Balance of Payments financial account. Total FDI flows are broken down by kind of instrument used for making the investment:Equity capital comprises equity in branches, all shares in subsidiaries and associates (except non-participating, preferred shares that are treated as debt securities and are included under other FDI capital) and other contributions such as the provision of machinery.Reinvested earnings consist of the direct investor's share (in proportion to equity participation) of earnings not distributed by the direct investment enterprise. Reinvested earnings are an imputed transaction. Reinvested earnings are also recorded with opposite sign among FDI income (see below). This recording represents not distributed income as being earned by the direct investor and reinvested in the direct investment enterprise at the same time.Other FDI capital (loans) covers the borrowing and lending of funds, including debt securities and trade credits between direct investors and direct investment enterprises. Debt transactions between affiliated financial intermediaries recorded under direct investment flows are limited to permanent debt. 2) FDI stocks (or positions) denote the value of the investment at the end of the period. FDI stocks are recorded in the International Investment Position. Outward FDI stocks are recorded as assets of the reporting economy, inward FDI stocks as liabilities. Similarly with flows, FDI stocks are broken down by kind of instrument. However, there are only two categories instead of three:Equity capital and reinvested earnings is the value of the own capital of the enterprise, including the value of own reserves that are accumulated from past reinvested earnings. Reserves corresponding to reinvested earnings are not shown separately from other equity capital as in the case of flows.Other FDI capital is the stock of debts (assets or liabilities) between the direct investors and the direct investment enterprise. 3) FDI income is the income accruing to direct investors during the period. FDI income is recorded in the current account of the Balance of Payments. Total FDI income is broken down by kind of income. The categories of FDI income available are linked to the breakdown of FDI flows and stocks by kind of instrument, namely:Dividends Dividends payable in the period and branch profits remitted to the direct investor, gross of any withholding taxes. Dividends include payments due on common and preferred shares.Reinvested earnings See definition under FDI flows.Interest on loans Interest accrued in the period on loans (other FDI capital) with affiliated enterprises, gross of any withholding tax. 4) FDI intensity Out of FDI annual data, an indicator useful to measure EU market integration is also calculated and disseminated in the domain Structural Indicators:FDI intensity as % of GDP: Average of inward and outward FDI flows divided by GDP. A higher index indicates higher new FDI during the period in relation to the size of the economy as measured by GDP. If this index increases over time, then the country/zone is becoming more integrated with the international economy.

20.1. Source data

Recent exchange rate movements have been unusually large, triggering a debate regarding their likely effects on trade. Historical experience in advanced and emerging market and developing economies suggests that exchange rate movements typically have sizable effects on export and import volumes. A 10 percent real effective depreciation in an economy’s currency is associated with a rise in real net exports of, on average, 1.5 percent of GDP, with substantial cross-country variation around this average. Although these effects fully materialize over a number of years, much of the adjustment occurs in the first year. The boost to exports associated with currency depreciation is found to be largest in countries with initial economic slack and with domestic financial systems that are operating normally. Some evidence suggests that the rise of global value chains has weakened the relationship between exchange rates and trade in intermediate products used as inputs into other economies’ exports. However, the bulk of global trade still consists of conventional trade, and there is little evidence of a general trend toward disconnect between exchange rates and total exports and imports.

This table presents information on the external long-term indebtedness of developing economies (as debtors), expressed in millions of dollars, expressed as percentage of total long-term debt, as percentage of debt source and as percentage of region. The table also provides breakdown of public and publicly guaranteed debt by source of lending (as creditors).

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a geographical region during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services, a component of BoP current account, and data on Foreign Direct Investment, a component of BoP financial account, are used to monitor the external commercial performance of different economies. Outward Foreign Affiliates Statistics (FATS) measure the commercial presence, as defined by the General Agreement on Trade in Services (GATS), through affiliates in foreign markets. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports.  Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU or in millions of national currency. Balance of Payments data coverage varies according to the collection. Some collections refer only to Euro area or EU countries, while some others' coverage includes also EU partner countries.   Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide 2003. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.    More information on BoP is available for each specific collection: Quarterly BoP, ITS, FDI, Outward FATS, BoP of EU Institutions.

Note:i) All the Data Present in this dataset are "Not seasonally adjusted data (NSA)". ii)Eurostat Hierarchy: General and regional statistics > European and national short term indicators (euroind) > Monetary and financial indicators (ei_mf).

Financial transactions in assets and liabilities, consolidated and non-consolidated, for all the sectors of the economy and in relation to rest of the world. (Tables 610 and 620 of ESA 95 transmission programme)

GDP and main components dataset contains both Quarterly & Annual data for ; Current prices, volumes and Price indices

Covers data on corporate, indirect and individual income tax rates throughout 163 countries across the world during the period from 2006 to 2015. Provided by KPMG.

Eurostat Dataset Id:nama_r_e2gdp Gross domestic product - GDP at market prices - is the final result of the production activity of resident producer units (ESA 1995, 8.89). It can be defined in three ways: 1. Output approach GDP is the sum of gross value added of the various institutional sectors or the various industries plus taxes and less subsidies on products (which are not allocated to sectors and industries). It is also the balancing item in the total economy production account. 2. Expenditure approach GDP is the sum of final uses of goods and services by resident institutional units (final consumption expenditure and gross capital formation), plus exports and minus imports of goods and services. At regional level the expediture approach is not used in the EU, because there is no data on regional exports and imports.  3. Income approach GDP is the sum of uses in the total economy generation of income account: compensation of employees, taxes on production, less subsidies, gross operating surplus and mixed income of the total economy. The different measures for the regional GDP are absolute figures in € and Purchasing Power Standards (PPS), figures per inhabitant and relative data compared to the EU27 average.

Eurostat Dataset Id:nama_r_e3gdp National accounts are a coherent and consistent set of macroeconomic indicators, which provide an overall picture of the economic situation and are widely used for economic analysis and forecasting, policy design and policy making. Eurostat publishes annual and quarterly national accounts, annual and quarterly sector accounts as well as supply, use and input-output tables, which are each presented with associated metadata. Annual national accounts are compiled in accordance with the European System of Accounts - ESA 1995 (Council Regulation 2223/96). Annex B of the Regulation consists of a comprehensive list of the variables to be transmitted for Community purposes within specified time limits. This transmission programme has been updated by Regulation (EC) N° 1392/2007 of the European Parliament and of the Council. Meanwhile, the ESA95 has been reviewed to bring national accounts in the European Union, in line with new economic environment, advances in methodological research and needs of users and the updated national accounts framework at the international level, the SNA 2008. The revisions are reflected in an updated Regulation of the European Parliament and of the Council on the European system of national and regional accounts in the European Union of 2010 (ESA 2010). The associated transmission programme is also updated and data transmissions in accordance with ESA 2010 are compulsory from September 2014 onwards. Further information on the transition from ESA 95 to ESA 2010 is presented on the Eurostat website. The domain consists of the following collections: GDP and main aggregates. The data are recorded at current and constant prices and include the corresponding implicit price indices. Final consumption aggregates, including the split into household and government consumption. The data are recorded at current and constant prices and include the corresponding implicit price indices. Income, saving and net lending / net borrowing at current prices. Disposable income is also shown in real terms. Exports and imports by Member States of the EU/third countries. The data are recorded at current and constant prices and include the corresponding implicit price indices. Breakdowns of gross value added, compensation of employees, wages and salaries, operating surplus, employment (domestic scope), gross fixed capital formation (GFCF) and fixed assets and other main aggregates by industry; investment by products and household final consumption expenditure by consumption purposes (COICOP). The data are recorded at current and constant prices and include the corresponding implicit price indices. Auxiliary indicators: Population and employment national data, purchasing power parities, contributions to GDP growth, labour productivity, unit labour cost and GDP per capita. Geographical entities covered are the European Union, the euro area, EU Member States, Candidate Countries, EFTA countries, US, Japan and possibly other countries on an ad-hoc basis. The data are published: - in ECU/euro, in national currencies (including euro converted from former national currencies using the irrevocably fixed rate for all years) and in Purchasing Power Standards (PPS); - at current prices and in volume terms; - Population and employment are measured in persons. Employment is also measured in total hours worked. Data sources: National Statistical Institutes

The focus of this domain is on enlargement countries, in other words the following country groups: candidate countries — Albania (AL), the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)potential candidates — Bosnia and Herzegovina (BA), as well as Kosovo (XK) (*) An extensive range of indicators is presented in this domain, including indicators from almost every theme covered by European statistics. Only annual data are published in this domain. (*) This designation is without prejudice to positions on status and is in line with UNSCR 1244 and the ICJ Opinion on the Kosovo declaration of independence.

Eurostat Dataset Id:nama_r_e3vab95r2 Branch accounts include data on gross value added, compensation of employees, gross fixed capital formation, total employment and number of employees. The legal base for the collection of branch accounts data is the European System of Accounts ESA95. The ESA95 data are sent to Eurostat by the National Statistical Institutes. The units for these variables are: Millions of national currency and millions of Euro for gross value added, compensation of employees and gross fixed capital formation. 1000 persons for total employment and number of employees at NUTS level 3 1000 hours worked for total employment and number of employees at NUTS level 2 Geographical coverage comprises all EU Member States and some Candidate countries down to Nuts 3 level (Nuts = "Nomenclature of territorial units for statistics" - see Eurostat's classification server "RAMON") for the variables gross value added, total employment and number of employees. Compensation of employees, employment in hours worked and gross fixed capital formation are only collected down to Nuts 2 level. For further information about sources and collection methods in the Member States, please refer to National Statistical Institutes (select Services - Links).

OECD Health Data 2014 offers the most comprehensive source of comparable statistics on health and health systems across OECD countries. It is an essential tool for health researchers and policy advisors in governments, the private sector and the academic community, to carry out comparative analyses and draw lessons from international comparisons of diverse health care systems.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICPs) are designed for international comparisons of consumer price inflation. HICP is used by e.g. the European Central Bank for monitoring of inflation in the Economic and Monetary Union and for the assessment of inflation convergence as required under Article 121 of the Treaty of Amsterdam.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

20.1. Source data

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICPs) are designed for international comparisons of consumer price inflation. HICP is used for example by the European Central Bank for monitoring of inflation in the Economic and Monetary Union and for the assessment of inflation convergence as required under Article 121 of the Treaty of Amsterdam. For the U.S. and Japan national consumer price indices are used in the table.

Harmonised Indices of Consumer Prices (HICPs) give comparable measures of inflation for the countries and country groups for which they are produced. They are economic indicators that measure the change over time of the prices of consumer goods and services acquired by households. In other words, they are a set of consumer price indices (CPIs) calculated according to a harmonised approach and a single set of definitions. In particular, HICPs provide the official measure of consumer price inflation in the euro area for the purposes of monetary policy and the assessment of inflation convergence as required under the Maastricht criteria for accession to the euro. HICPs are available for all EU Member States, Iceland, Norway and Switzerland. In addition to the individual country series there are three key country-group aggregate indices: the Monetary Union Index of Consumer Prices (MUICP or EA) covering the euro area countries, the European index of consumer prices (EICP or EU) including all Member States, and the European Economic Area index of consumer prices (EEAICP), which in addition to the EU also covers Iceland and Norway. The official country-group aggregates reflect the evolution of Economic and monetary union, the EU and the EEA. HICPs for new Member States are chained into the aggregate indices at the time of accession. In addition to these official aggregates, Eurostat computes also country aggregates with stable composition over time. For example, the aggregate 'EU-28' shows price indices covering all current 28 Member States since 1997. There are also interim HICPs for candidate country Turkey. It is expected that once it accedes to the EU its HICPs will be fully comparable with those of the existing Member States. For the USA, only the all-items proxy-HICP is available. The national HICPs are produced by National Statistical Institutes, while the country-group aggregates are produced by Eurostat. The data that is released monthly on Eurostat's free dissemination database include price indices themselves as well as their rates of change as monthly, annual and 12-month moving average changes. In addition to the headline figure, the all-items HICP, around one hundred sub-indices for different goods and services and over thirty special aggregates are made available. The relative weights for the indices, including the special aggregates, are published for the individual countries and for the country groups. An early estimate of the overall inflation rate for the euro area, as well as estimates for its four main components, are published in a news release monthly, usually on the last working day of the reference month. They are called HICP flash estimates. Â

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) give comparable measures of inflation for the countries and country groups for which they are produced. They are economic indicators that measure the change over time of the prices of consumer goods and services acquired by households. In other words, they are a set of consumer price indices (CPI) calculated according to a harmonised approach and a single set of definitions. In particular, HICP provide the official measure of consumer price inflation in the euro area for the purposes of monetary policy and the assessment of inflation convergence as required under the Maastricht criteria for accession to the euro. HICP are available for all EU Member States, Iceland, Norway and Switzerland. In addition to the individual country series there are three key country-group aggregate indices: the Monetary Union Index of Consumer Prices (MUICP or EA) covering the euro area countries, the European index of consumer prices (EICP or EU) including all Member States, and the European Economic Area index of consumer prices (EEAICP), which in addition to the EU also covers Iceland and Norway. The official country-group aggregates reflect the evolution of Economic and monetary union (EA), the EU and the EEA. The HICP for new Member States is chained into the aggregate indices at the time of accession. In addition to these official aggregates, Eurostat also computes, for analytical purposes, country aggregates with stable composition over time. For example, the aggregate 'EU-28' shows price indices covering all current 28 Member States since 1997. HICP for Turkey (candidate country) is also published. For the USA, a proxy-HICP for the all-items and main headings is available. The national HICP is produced by National Statistical Institutes, while the country-group aggregates are produced by Eurostat. The data released monthly on Eurostat's free dissemination database includes price indices and rates (monthly, annual and 12-month moving average changes). In addition to the headline figure 'all-items HICP', around one hundred sub-indices for different goods and services and over thirty special aggregates are made available. The relative weights for the indices, including the special aggregates, are published for the individual countries and for the country groups, once a year, with the January data. An early estimate of the overall inflation rate for the euro area, as well as for selected components, are published monthly, usually on the last working day of the reference month, both as a News Release and in the database. They are called 'HICP flash estimates'. HICP at constant tax rates (HICP-CT) follows the same computation principles as the HICP, but is based on prices at constant tax rates. The comparison with the standard HICP can show the potential impact of changes in indirect taxes (e.g. VAT and excise duties) on the overall inflation (more information).

Harmonised Indices of Consumer Prices (HICP) give comparable measures of inflation for the countries and country groups for which they are produced. They are economic indicators that measure the change over time of the prices of consumer goods and services acquired by households. In other words, they are a set of consumer price indices (CPI) calculated according to a harmonised approach and a single set of definitions. In particular, HICP provide the official measure of consumer price inflation in the euro area for the purposes of monetary policy and the assessment of inflation convergence as required under the Maastricht criteria for accession to the euro. HICP are available for all EU Member States, Iceland, Norway and Switzerland. In addition to the individual country series there are three key country-group aggregate indices: the Monetary Union Index of Consumer Prices (MUICP or EA) covering the euro area countries, the European index of consumer prices (EICP or EU) including all Member States, and the European Economic Area index of consumer prices (EEAICP), which in addition to the EU also covers Iceland and Norway. The official country-group aggregates reflect the evolution of Economic and monetary union (EA), the EU and the EEA. The HICP for new Member States is chained into the aggregate indices at the time of accession. In addition to these official aggregates, Eurostat also computes, for analytical purposes, country aggregates with stable composition over time. For example, the aggregate 'EU-28' shows price indices covering all current 28 Member States since 1997. HICP for Turkey (candidate country) is also published. For the USA, a proxy-HICP for the all-items and main headings is available. The national HICP is produced by National Statistical Institutes, while the country-group aggregates are produced by Eurostat. The data released monthly on Eurostat's free dissemination database includes price indices and rates (monthly, annual and 12-month moving average changes). In addition to the headline figure 'all-items HICP', around one hundred sub-indices for different goods and services and over thirty special aggregates are made available. The relative weights for the indices, including the special aggregates, are published for the individual countries and for the country groups, once a year, with the January data. An early estimate of the overall inflation rate for the euro area, as well as for selected components, are published monthly, usually on the last working day of the reference month, both as a News Release and in the database. They are called 'HICP flash estimates'. HICP at constant tax rates (HICP-CT) follows the same computation principles as the HICP, but is based on prices at constant tax rates. The comparison with the standard HICP can show the potential impact of changes in indirect taxes (e.g. VAT and excise duties) on the overall inflation (more information).

Historical Statistics on Population, GDP and Per Capita GDP for 1-2008 AD period. Copyright Angus Maddison.

The domain "Income and living conditions" covers four topics: people at risk of poverty or social exclusion, income distribution and monetary poverty, living conditions and material deprivation, which are again structured into collections of indicators on specific topics. The collection "People at risk of poverty or social exclusion" houses main indicator on risk of poverty or social inclusion included in the Europe 2020 strategy as well as the intersections between sub-populations of all Europe 2020 indicators on poverty and social exclusion. The collection "Income distribution and monetary poverty" houses collections of indicators relating to poverty risk, poverty risk of working individuals as well as the distribution of income. The collection "Living conditions" hosts indicators relating to characteristics and living conditions of households, characteristics of the population according to different breakdowns, health and labour conditions, housing conditions as well as childcare related indicators. The collection "Material deprivation" covers indicators relating to economic strain, durables, housing deprivation and environment of the dwelling.

A major obstacle to cross-country research on the role of revenue and taxation in development has been the weakness of available data. Government Revenue Dataset (GRD), developed through the International Centre for Tax and Development (ICTD), is aimed at overcoming this obstacle. It meticulously combines data from several major international databases, as well as drawing on data compiled from all available International Monetary Fund (IMF) Article IV reports. It achieves marked improvements in data coverage and accuracy, including a standardized approach to revenue from natural resources, and holds the promise of significant improvement in the credibility and robustness of research in this area. Dataset contains Central, General and merged government revenue data reported as % of GDP.

Data in this domain constitute only a small part of the entire National Accounts data range available from Eurostat. Annual and quarterly national accounts are compiled in accordance with the European System of Accounts - ESA 2010as defined in Annex B of the Council Regulation (EU) No 549/2013 of the European Parliament and of the Council of 21 May 2013. The previous European System of Accounts, ESA95, was reviewed to bring national accounts in the European Union, in line with new economic environment, advances in methodological research and needs of users and the updated national accounts framework at the international level, the SNA 2008. The revisions are reflected in an updated Regulation of the European Parliament and of the Council on the European system of national and regional accounts in the European Union of 2010 (ESA 2010). The associated transmission programme is also updated and data transmissions in accordance with ESA 2010 are compulsory from September 2014 onwards. The annual data of this domain consists of the following collections: 1. Main GDP aggregates: main components from the output, expenditure and income side.nama_10_gdp: GDP and main components (output, expenditure and income   The quarterly data of this domain consists of the following collections 1. Main GDP aggregates, main components from the output, expenditure and income side, expenditure breakdowns by industry and assets. namq_10_ma: Main GDP aggregatesnamq_10_gdp: GDP and main components (output, expenditure and incomenamq_10_fcs: Final consumption aggregates by durabilitynamq_10_exi: Exports and imports by Member States of the EU/third countries 2. Breakdowns of GDP aggregates and employment data by main industries and asset classes. namq_10_bbr: Basic breakdowns main GDP aggregates and employment (by industry and assets)namq_10_a10: Gross value added and income by A*10 industrynamq_10_an6: Gross fixed capital formation by AN_F6 asset typenamq_10_a10_e: Employment by A*10 industry breakdowns Geographical entities covered are the European Union, the euro area, EU Member States, Candidate Countries, EFTA countries, US, Japan and possibly other countries on an ad-hoc basis. Data sources: National Statistical Institutes

The data presented here are a key component of the USDA Baseline projections process, and can be used as a benchmark for analyzing the impacts of U.S. and global macroeconomic shocks. The data for the Baseline projections are updated once a year to reflect the assumptions used for the Baseline. The historical data will be revised several times a year as the underlying data evolve.

Time series on international reserves (including gold), by individual country, expressed in millions of dollars. It further presents the number of months of merchandise imports that these reserves could finance at current imports level, as well as annual changes in total reserves.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services (ITS), a component of BoP current account, are used, alongside with data on Foreign Direct Investment (a component of BoP financial account), to monitor the external commercial performance of different economies. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports. Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU and in millions of national currency. Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services (ITS), a component of BoP current account, are used, alongside with data on Foreign Direct Investment (a component of BoP financial account), to monitor the external commercial performance of different economies. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports. Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU and in millions of national currency. Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services (ITS), a component of BoP current account, are used, alongside with data on Foreign Direct Investment (a component of BoP financial account), to monitor the external commercial performance of different economies. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports. Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU and in millions of national currency. Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services (ITS), a component of BoP current account, are used, alongside with data on Foreign Direct Investment (a component of BoP financial account), to monitor the external commercial performance of different economies. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports. Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU and in millions of national currency. Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services (ITS), a component of BoP current account, are used, alongside with data on Foreign Direct Investment (a component of BoP financial account), to monitor the external commercial performance of different economies. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports. Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU and in millions of national currency. Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services (ITS), a component of BoP current account, are used, alongside with data on Foreign Direct Investment (a component of BoP financial account), to monitor the external commercial performance of different economies. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports. Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU and in millions of national currency. Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services (ITS), a component of BoP current account, are used, alongside with data on Foreign Direct Investment (a component of BoP financial account), to monitor the external commercial performance of different economies. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports. Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU and in millions of national currency. Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services (ITS), a component of BoP current account, are used, alongside with data on Foreign Direct Investment (a component of BoP financial account), to monitor the external commercial performance of different economies. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports. Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU and in millions of national currency. Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services (ITS), a component of BoP current account, are used, alongside with data on Foreign Direct Investment (a component of BoP financial account), to monitor the external commercial performance of different economies. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports. Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU and in millions of national currency. Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services (ITS), a component of BoP current account, are used, alongside with data on Foreign Direct Investment (a component of BoP financial account), to monitor the external commercial performance of different economies. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports. Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU and in millions of national currency. Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services (ITS), a component of BoP current account, are used, alongside with data on Foreign Direct Investment (a component of BoP financial account), to monitor the external commercial performance of different economies. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports. Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU and in millions of national currency. Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services (ITS), a component of BoP current account, are used, alongside with data on Foreign Direct Investment (a component of BoP financial account), to monitor the external commercial performance of different economies. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports. Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU and in millions of national currency. Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services (ITS), a component of BoP current account, are used, alongside with data on Foreign Direct Investment (a component of BoP financial account), to monitor the external commercial performance of different economies. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports. Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU and in millions of national currency. Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.

Eurostat uses as a base for its work the OECD Benchmark Definition of Foreign Direct Investment Third Edition, a detailed operational definition fully consistent with the IMF Balance of Payments Manual, Fifth Edition, BPM5. Foreign direct investment (FDI) is the category of international investment made by an entity resident in one economy (direct investor) to acquire a lasting interest in an enterprise operating in another economy (direct investment enterprise). The lasting interest is deemed to exist if the direct investor acquires at least 10% of the voting power of the direct investment enterprise. FDI statistics record separately: 1) Inward FDI (or FDI in the reporting economy), namely investment by foreigners in enterprises resident in the reporting economy. 2) Outward FDI (or FDIabroad), namely investment by residents entities in affiliated enterprises abroad. FDI statistics record both the initial investment and all subsequent investment made by the direct investor, either in the form of equity capital, or in the form of loans, or in the form of reinvesting earnings. Investment made through other affiliated enterprises of the same group of the direct investor should also be recorded according to the international methodology. There are three main indicators: FDI flows, stocks and income. The indicators described in more detail below are presented in the complete tables with a breakdown by partner country or region and a breakdown by the kind of activity in which FDI is made. In the table called "Main indicators" there is a reduced breakdown by partners and data for total activity only. See the part on classification system for more detail. See also the User's guideon the structure on the database and for practical information on data downloading. 1) FDI flows denote the new investment made during the period. FDI flows are recorded in the Balance of Payments financial account. Total FDI flows are broken down by kind of instrument used for making the investment: Equity capital comprises equity in branches, all shares in subsidiaries and associates (except non-participating, preferred shares that are treated as debt securities and are included under other FDI capital) and other contributions such as the provision of machinery. Reinvested earnings consist of the direct investor's share (in proportion to equity participation) of earnings not distributed by the direct investment enterprise. Reinvested earnings are an imputed transaction. Reinvested earnings are also recorded with opposite sign among FDI income (see below). This recording represents not distributed income as being earned by the direct investor and reinvested in the direct investment enterprise at the same time. Other FDI capital (loans) covers the borrowing and lending of funds, including debt securities and trade credits between direct investors and direct investment enterprises. Debt transactions between affiliated financial intermediaries recorded under direct investment flows are limited to permanent debt. 2) FDI stocks (or positions) denote the value of the investment at the end of the period. FDI stocks are recorded in the International Investment Position. Outward FDI stocks are recorded as assets of the reporting economy, inward FDI stocks as liabilities. Similarly with flows, FDI stocks are broken down by kind of instrument. However, there are only two categories instead of three: Equity capital and reinvested earnings is the value of the own capital of the enterprise, including the value of own reserves that are accumulated from past reinvested earnings. Reserves corresponding to reinvested earnings are not shown separately from other equity capital as in the case of flows. Other FDI capital is the stock of debts (assets or liabilities) between the direct investors and the direct investment enterprise. 3) FDI income is the income accruing to direct investors during the period. FDI income is recorded in the current account of the Balance of Payments. Total FDI income is broken down by kind of income. The categories of FDI income available are linked to the breakdown of FDI flows and stocks by kind of instrument, namely: Dividends Dividends payable in the period and branch profits remitted to the direct investor, gross of any withholding taxes. Dividends include payments due on common and preferred shares. Reinvested earnings See definition under FDI flows. Interest on loans Interest accrued in the period on loans (other FDI capital) with affiliated enterprises, gross of any withholding tax. 4) FDI intensity Out of FDI annual data, an indicator useful to measure EU market integration is also calculated and disseminated in the domain Structural Indicators: FDI intensity as % of GDP: Average of inward and outward FDI flows divided by GDP. A higher index indicates higher new FDI during the period in relation to the size of the economy as measured by GDP. If this index increases over time, then the country/zone is becoming more integrated with the international economy.

The OECD Science, Technology and Industry Outlook 2012 presents, in a series of country profiles, the main features, strengths and weaknesses of national STI systems and major recent changes in national STI policy. The statistical dimension of the country profiles has drawn on the work and empirical research conducted by the OECD on the measurement of innovation and the development of internationally comparable STI indicators for policy analysis.

The level of citizens confidence in EU institutions (Council of the European Union, European Parliament and European Commission) is expressed as the share of positive opinions (people who declare that they tend to trust) about the institutions. The indicator is based on the Eurobarometer, a survey which has been conducted twice a year since 1973 to monitor the evolution of public opinion in the Member States. The indicator only displays the results of the autumn survey. Potential replies to the question on the level of confidence include 'tend to trust', 'tend not to trust' and 'don't know' or 'no answer'. Trust is not precisely defined and could leave some room for interpretation to the interviewees.

The focus of this domain is on enlargement countries, in other words the following country groups:candidate countries — Albania (AL), the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)potential candidates — Bosnia and Herzegovina (BA), as well as Kosovo (XK) (*) An extensive range of indicators is presented in this domain, including indicators from almost every theme covered by European statistics. Only annual data are published in this domain. (*) This designation is without prejudice to positions on status and is in line with UNSCR 1244 and the ICJ Opinion on the Kosovo declaration of independence.

Data in this domain constitute only a small part of the entire National Accounts data range available from Eurostat. Annual and quarterly national accounts are compiled in accordance with the European System of Accounts - ESA 2010as defined in Annex B of the Council Regulation (EU) No 549/2013 of the European Parliament and of the Council of 21 May 2013. The previous European System of Accounts, ESA95, was reviewed to bring national accounts in the European Union, in line with new economic environment, advances in methodological research and needs of users and the updated national accounts framework at the international level, the SNA 2008. The revisions are reflected in an updated Regulation of the European Parliament and of the Council on the European system of national and regional accounts in the European Union of 2010 (ESA 2010). The associated transmission programme is also updated and data transmissions in accordance with ESA 2010 are compulsory from September 2014 onwards. The annual data of this domain consists of the following collections: 1. Main GDP aggregates: main components from the output, expenditure and income side. nama_10_gdp: GDP and main components (output, expenditure and income   The quarterly data of this domain consists of the following collections 1. Main GDP aggregates, main components from the output, expenditure and income side, expenditure breakdowns by industry and assets. namq_10_ma: Main GDP aggregatesnamq_10_gdp: GDP and main components (output, expenditure and incomenamq_10_fcs: Final consumption aggregates by durabilitynamq_10_exi: Exports and imports by Member States of the EU/third countries 2. Breakdowns of GDP aggregates and employment data by main industries and asset classes. namq_10_bbr: Basic breakdowns main GDP aggregates and employment (by industry and assets)namq_10_a10: Gross value added and income by A*10 industrynamq_10_an6: Gross fixed capital formation by AN_F6 asset typenamq_10_a10_e: Employment by A*10 industry breakdowns Geographical entities covered are the European Union, the euro area, EU Member States, Candidate Countries, EFTA countries, US, Japan and possibly other countries on an ad-hoc basis. Data sources: National Statistical Institutes

Data in this domain constitute only a small part of the entire National Accounts data range available from Eurostat. Annual and quarterly national accounts are compiled in accordance with the European System of Accounts - ESA 2010as defined in Annex B of the Council Regulation (EU) No 549/2013 of the European Parliament and of the Council of 21 May 2013. The previous European System of Accounts, ESA95, was reviewed to bring national accounts in the European Union, in line with new economic environment, advances in methodological research and needs of users and the updated national accounts framework at the international level, the SNA 2008. The revisions are reflected in an updated Regulation of the European Parliament and of the Council on the European system of national and regional accounts in the European Union of 2010 (ESA 2010). The associated transmission programme is also updated and data transmissions in accordance with ESA 2010 are compulsory from September 2014 onwards. The annual data of this domain consists of the following collections: 1. Main GDP aggregates: main components from the output, expenditure and income side.nama_10_gdp: GDP and main components (output, expenditure and income   The quarterly data of this domain consists of the following collections 1. Main GDP aggregates, main components from the output, expenditure and income side, expenditure breakdowns by industry and assets. namq_10_ma: Main GDP aggregatesnamq_10_gdp: GDP and main components (output, expenditure and incomenamq_10_fcs: Final consumption aggregates by durabilitynamq_10_exi: Exports and imports by Member States of the EU/third countries 2. Breakdowns of GDP aggregates and employment data by main industries and asset classes. namq_10_bbr: Basic breakdowns main GDP aggregates and employment (by industry and assets)namq_10_a10: Gross value added and income by A*10 industrynamq_10_an6: Gross fixed capital formation by AN_F6 asset typenamq_10_a10_e: Employment by A*10 industry breakdowns Geographical entities covered are the European Union, the euro area, EU Member States, Candidate Countries, EFTA countries, US, Japan and possibly other countries on an ad-hoc basis. Data sources: National Statistical Institutes

Data in this domain constitute only a small part of the entire National Accounts data range available from Eurostat. Annual and quarterly national accounts are compiled in accordance with the European System of Accounts - ESA 2010as defined in Annex B of the Council Regulation (EU) No 549/2013 of the European Parliament and of the Council of 21 May 2013. The previous European System of Accounts, ESA95, was reviewed to bring national accounts in the European Union, in line with new economic environment, advances in methodological research and needs of users and the updated national accounts framework at the international level, the SNA 2008. The revisions are reflected in an updated Regulation of the European Parliament and of the Council on the European system of national and regional accounts in the European Union of 2010 (ESA 2010). The associated transmission programme is also updated and data transmissions in accordance with ESA 2010 are compulsory from September 2014 onwards. The annual data of this domain consists of the following collections: 1. Main GDP aggregates: main components from the output, expenditure and income side.nama_10_gdp: GDP and main components (output, expenditure and income   The quarterly data of this domain consists of the following collections 1. Main GDP aggregates, main components from the output, expenditure and income side, expenditure breakdowns by industry and assets. namq_10_ma: Main GDP aggregatesnamq_10_gdp: GDP and main components (output, expenditure and incomenamq_10_fcs: Final consumption aggregates by durabilitynamq_10_exi: Exports and imports by Member States of the EU/third countries 2. Breakdowns of GDP aggregates and employment data by main industries and asset classes. namq_10_bbr: Basic breakdowns main GDP aggregates and employment (by industry and assets)namq_10_a10: Gross value added and income by A*10 industrynamq_10_an6: Gross fixed capital formation by AN_F6 asset typenamq_10_a10_e: Employment by A*10 industry breakdowns Geographical entities covered are the European Union, the euro area, EU Member States, Candidate Countries, EFTA countries, US, Japan and possibly other countries on an ad-hoc basis. Data sources: National Statistical Institutes

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a geographical region during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services, a component of BoP current account, and data on Foreign Direct Investment, a component of BoP financial account, are used to monitor the external commercial performance of different economies. Outward Foreign Affiliates Statistics (FATS) measure the commercial presence, as defined by the General Agreement on Trade in Services (GATS), through affiliates in foreign markets. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports.  Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU or in millions of national currency. Balance of Payments data coverage varies according to the collection. Some collections refer only to Euro area or EU countries, while some others' coverage includes also EU partner countries.   Several statistical adjustments are applied to the original data provided by the Member States. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.    More information on BoP is available for each specific collection: Quarterly BoP, ITS, FDI, Outward FATS, BoP of EU Institutions.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a geographical region during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services, a component of BoP current account, and data on Foreign Direct Investment, a component of BoP financial account, are used to monitor the external commercial performance of different economies. Outward Foreign Affiliates Statistics (FATS) measure the commercial presence, as defined by the General Agreement on Trade in Services (GATS), through affiliates in foreign markets. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports.  Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU or in millions of national currency. Balance of Payments data coverage varies according to the collection. Some collections refer only to Euro area or EU countries, while some others' coverage includes also EU partner countries.   Several statistical adjustments are applied to the original data provided by the Member States. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.    More information on BoP is available for each specific collection: Quarterly BoP, ITS, FDI, Outward FATS, BoP of EU Institutions.

The Structure of Earnings Survey (SES) is a 4-yearly survey which provides EU-wide harmonised structural data on gross earnings, hours paid and annual days of paid holiday leave, which are collected every four years under Council Regulation (EC) No 530/1999 concerning structural statistics on earnings and on labour costs, and Commission Regulation (EC) No 1738/2005 amending Regulation (EC) No 1916/2000 as regards the definition and transmission of information on the structure of earnings. The objective of this legislation is so that National Statistical Institutes (NSIs) provide accurate and harmonised data on earnings in EU Member States and other countries for policy-making and research purposes. The SES 2010 provides detailed and comparable information on relationships between the level of hourly, monthly and annual remuneration, personal characteristics of employees (sex, age, occupation, length of service, highest educational level attained, etc.) and their employer (economic activity, size and economic control of the enterprise). Regional data is also available for some countries and regional metadata is identical to that provided for national data.

The Structure of Earnings Survey (SES) is a 4-yearly survey which provides EU-wide harmonised structural data on gross earnings, hours paid and annual days of paid holiday leave, which are collected every four years under Council Regulation (EC) No 530/1999 concerning structural statistics on earnings and on labour costs, and Commission Regulation (EC) No 1738/2005 amending Regulation (EC) No 1916/2000 as regards the definition and transmission of information on the structure of earnings. The objective of this legislation is so that National Statistical Institutes (NSIs) provide accurate and harmonised data on earnings in EU Member States and other countries for policy-making and research purposes. The SES 2010 provides detailed and comparable information on relationships between the level of hourly, monthly and annual remuneration, personal characteristics of employees (sex, age, occupation, length of service, highest educational level attained, etc.) and their employer (economic activity, size and economic control of the enterprise). Regional data is also available for some countries and regional metadata is identical to that provided for national data.

The Structure of Earnings Survey (SES) is a 4-yearly survey which provides EU-wide harmonised structural data on gross earnings, hours paid and annual days of paid holiday leave, which are collected every four years under Council Regulation (EC) No 530/1999 concerning structural statistics on earnings and on labour costs, and Commission Regulation (EC) No 1738/2005 amending Regulation (EC) No 1916/2000 as regards the definition and transmission of information on the structure of earnings. The objective of this legislation is so that National Statistical Institutes (NSIs) provide accurate and harmonised data on earnings in EU Member States and other countries for policy-making and research purposes. The SES 2010 provides detailed and comparable information on relationships between the level of hourly, monthly and annual remuneration, personal characteristics of employees (sex, age, occupation, length of service, highest educational level attained, etc.) and their employer (economic activity, size and economic control of the enterprise). Regional data is also available for some countries and regional metadata is identical to that provided for national data.

The Structure of Earnings Survey (SES) is a 4-yearly survey which provides EU-wide harmonised structural data on gross earnings, hours paid and annual days of paid holiday leave, which are collected every four years under Council Regulation (EC) No 530/1999 concerning structural statistics on earnings and on labour costs, and Commission Regulation (EC) No 1738/2005 amending Regulation (EC) No 1916/2000 as regards the definition and transmission of information on the structure of earnings. The objective of this legislation is so that National Statistical Institutes (NSIs) provide accurate and harmonised data on earnings in EU Member States and other countries for policy-making and research purposes. The SES 2010 provides detailed and comparable information on relationships between the level of hourly, monthly and annual remuneration, personal characteristics of employees (sex, age, occupation, length of service, highest educational level attained, etc.) and their employer (economic activity, size and economic control of the enterprise). Regional data is also available for some countries and regional metadata is identical to that provided for national data.

The Structure of Earnings Survey (SES) is a 4-yearly survey which provides EU-wide harmonised structural data on gross earnings, hours paid and annual days of paid holiday leave, which are collected every four years under Council Regulation (EC) No 530/1999 concerning structural statistics on earnings and on labour costs, and Commission Regulation (EC) No 1738/2005 amending Regulation (EC) No 1916/2000 as regards the definition and transmission of information on the structure of earnings. The objective of this legislation is so that National Statistical Institutes (NSIs) provide accurate and harmonised data on earnings in EU Member States and other countries for policy-making and research purposes. The SES 2010 provides detailed and comparable information on relationships between the level of hourly, monthly and annual remuneration, personal characteristics of employees (sex, age, occupation, length of service, highest educational level attained, etc.) and their employer (economic activity, size and economic control of the enterprise). Regional data is also available for some countries and regional metadata is identical to that provided for national data.

The Structure of Earnings Survey (SES) is a 4-yearly survey which provides EU-wide harmonised structural data on gross earnings, hours paid and annual days of paid holiday leave, which are collected every four years under Council Regulation (EC) No 530/1999 concerning structural statistics on earnings and on labour costs, and Commission Regulation (EC) No 1738/2005 amending Regulation (EC) No 1916/2000 as regards the definition and transmission of information on the structure of earnings. The objective of this legislation is so that National Statistical Institutes (NSIs) provide accurate and harmonised data on earnings in EU Member States and other countries for policy-making and research purposes. The SES 2010 provides detailed and comparable information on relationships between the level of hourly, monthly and annual remuneration, personal characteristics of employees (sex, age, occupation, length of service, highest educational level attained, etc.) and their employer (economic activity, size and economic control of the enterprise). Regional data is also available for some countries and regional metadata is identical to that provided for national data.

The Structure of Earnings Survey (SES) is a 4-yearly survey which provides EU-wide harmonised structural data on gross earnings, hours paid and annual days of paid holiday leave, which are collected every four years under Council Regulation (EC) No 530/1999 concerning structural statistics on earnings and on labour costs, and Commission Regulation (EC) No 1738/2005 amending Regulation (EC) No 1916/2000 as regards the definition and transmission of information on the structure of earnings. The objective of this legislation is so that National Statistical Institutes (NSIs) provide accurate and harmonised data on earnings in EU Member States and other countries for policy-making and research purposes. The SES 2010 provides detailed and comparable information on relationships between the level of hourly, monthly and annual remuneration, personal characteristics of employees (sex, age, occupation, length of service, highest educational level attained, etc.) and their employer (economic activity, size and economic control of the enterprise). Regional data is also available for some countries and regional metadata is identical to that provided for national data.

The Structure of Earnings Survey (SES) is a 4-yearly survey which provides EU-wide harmonised structural data on gross earnings, hours paid and annual days of paid holiday leave, which are collected every four years under Council Regulation (EC) No 530/1999 concerning structural statistics on earnings and on labour costs, and Commission Regulation (EC) No 1738/2005 amending Regulation (EC) No 1916/2000 as regards the definition and transmission of information on the structure of earnings. The objective of this legislation is so that National Statistical Institutes (NSIs) provide accurate and harmonised data on earnings in EU Member States and other countries for policy-making and research purposes. The SES 2010 provides detailed and comparable information on relationships between the level of hourly, monthly and annual remuneration, personal characteristics of employees (sex, age, occupation, length of service, highest educational level attained, etc.) and their employer (economic activity, size and economic control of the enterprise). Regional data is also available for some countries and regional metadata is identical to that provided for national data.

The Structure of Earnings Survey (SES) is a 4-yearly survey which provides EU-wide harmonised structural data on gross earnings, hours paid and annual days of paid holiday leave, which are collected every four years under Council Regulation (EC) No 530/1999 concerning structural statistics on earnings and on labour costs, and Commission Regulation (EC) No 1738/2005 amending Regulation (EC) No 1916/2000 as regards the definition and transmission of information on the structure of earnings. The objective of this legislation is so that National Statistical Institutes (NSIs) provide accurate and harmonised data on earnings in EU Member States and other countries for policy-making and research purposes. The SES 2010 provides detailed and comparable information on relationships between the level of hourly, monthly and annual remuneration, personal characteristics of employees (sex, age, occupation, length of service, highest educational level attained, etc.) and their employer (economic activity, size and economic control of the enterprise). Regional data is also available for some countries and regional metadata is identical to that provided for national data.

The Economic Statistics Branch of the United Nations Statistics Division maintains this National Accounts Statistics database of main national accounts aggregates. It is the product of a global cooperation effort between the United Nations Statistics Division, international statistical agencies and the national statistical services of more than 200 countries and is in accordance with the request of the Statistical Commission that the most recent available data on national accounts of as many countries and areas as possible be published and disseminated regularly. This National Accounts Statistics database contains a complete and consistent set of time series from 1970 onwards of main national accounts aggregates for allUN Members States and all other countries and areas in the world. It is maintained and updated on the basis of annual collections of the official annual national accounts statistics supplemented by estimates of national accounts statistics for those years and countries for which the official statistics has incomplete or inconsistent information. In addition, to the values of national accounts statistics, it contains analytical indicators and ratios derived from the main national accounts aggregates related to economic structure and development.

The Economic Statistics Branch of the United Nations Statistics Division (UNSD) maintains and annually updates the National Accounts Official Country Data database. This work is carried out in accordance with the recommendation of the Statistical Commission at its first session that the Statistics Division of the United Nations should publish regularly the most recent available data on national accounts for as many countries and areas as possible. The database contains detailed official national accounts statistics in national currencies as provided by the National Statistical Offices.Data are available for most of the countries or areas of the world and form a valuable source of information on their economies. The database contains data as far back as 1946, up to the year t-1, with data for most countries available from the 1970s. The database covers not only national accounts main aggregates such as gross domestic product, national income, saving, value added by industry and household and government consumption expenditure and its relationships; but also detailed statistics for institutional sectors (including the rest of the world), comprising the production account, the generation of income account, the allocation of primary income account, the secondary distribution of income account, the use of disposable income account, the capital account and the financial account, if they are compiled by countries.The statistics for each country or area are presented according to the uniform table headings and classifications as recommended in the United Nations System of National Accounts 1993 (1993 SNA).Different series numbers (dimension “Series”) are used to store different time-series versions of national accounts statistics. Series numbers with two digits (10,20) refer to data compiled following the 1968 SNA national accounts methodology, while series numbers with three digits (100, 200, etc) refer to data compiled using the 1993 SNA national accounts methodology, and series numbers with four digits (1000, 1100, etc) refer to data compiled using the 2008 SNA national accounts methodology. In addition to different methodologies, different series numbers are used when data are reported in different currencies, fiscal years, or by different sources. Furthermore, data are stored under a new series number whenever there are significant changes in compilation practices which make the time series no longer comparable.

20.1. Source data

Source: Schneider, Friedrich , Buehn, Andreas and Montenegro, Claudio E.(2010) 'New Estimates for the Shadow Economies all over the World', International Economic Journal, 24: 4, 443-461. This dataset presents estimations of the shadow economies for 162 countries, including developing, Eastern European, Central Asian, and high income OECD countries over 1999 to 2006/2007.

In national currency, in current prices and constant prices (national base year, previous year prices and OECD base year i.e. 2005) - and for comparative purposes in US $ current prices and constant prices (using exchange rate and PPPs). Expressed in millions and in indices. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

OECD Factbook provides a global overview of today’s major economic, social and environmental indicators which cover a wide range of areas: agriculture, economic production, education, energy, environment, foreign aid, health, industry, information and communications, international trade, labour force, population, taxation, public expenditure and R&D. More countries than ever are covered in greater detail, enabling direct comparisons for many indicators between OECD Members and Brazil, China, India, Indonesia, Russian Federation and South Africa.

This Dataset contains information using an "indicator" approach, focusing on cross-country comparisons; the aim being to make the accounts more accessible and informative, whilst, at the same time, taking the opportunity to present the conceptual underpinning of, and comparability issues inherent in, each of the indicators presented.

Official development assistance (ODA) consists of grants or loans that are undertaken by the official sector with the objective of promoting economic development and welfare in recipient countries. Disbursements record the actual international transfer of financial resources, or of goods or services valued at the cost of the donor. ODA is here presented as a share of Gross National Income (GNI). GNI at market prices equals Gross Domestic Product (GDP) minus primary income payable by resident units to non-resident units, plus primary income receivable by resident units from the rest of the world. The EU made a commitment to collectively reach official development assistance of 0.7% of GNI by 2015 and of 0.56% of GNI as an intermediate target by 2010. The list of countries and territories eligible to receive ODA is determined by the OECD’s Development Assistance Committee (DAC).

Official development assistance (ODA) is defined here as net bilateral and imputed multilateral disbursements at market prices for ODA to countries mentioned in the DAC (Development Assistance Committee) list. Unit of measure is Million EUR.

Commodity prices have declined sharply over the past three years, and output growth has slowed considerably among those emerging market and developing economies that are net exporters of commodities. A critical question for policymakers in these countries is whether commodity windfall gains and losses influence potential output or merely trigger transient fluctuations of actual output around an unchanged trend for potential output. The analysis in this chapter suggests that both actual and potential output move together with the commodity terms of trade but that actual output commoves twice as strongly as potential output. The weak commodity price outlook is estimated to subtract almost 1 percentage point annually from the average rate of economic growth in commodity exporters over 2015–17 as compared with 2012–14. In exporters of energy commodities, the drag is estimated to be larger: about 2¼ percentage points on average over the same period. The projected drag on the growth of potential output is about one-third of that for actual output.

The Penn World Table provides purchasing power parity and national income accounts converted to international prices for 189 countries/territories for some or all of the years 1950-2010. Its expenditure entries are denominated in a common set of prices in a common currency so that real quantity comparisons can be made, both between countries and over time. It also provides information about relative prices within and between countries, as well as demographic data and capital stock estimates. The Penn World Table grew out of the United Nations International Comparison Programme (ICP) that was jointly directed by Irving Kravis at Penn through the first three phases ending with 1975 comparison (Kravis, Heston and Summers, 1982). PWT 7.1 Alan Heston, Robert Summers and Bettina Aten, Penn World Table Version 7.1, Center for International Comparisons of Production, Income and Prices at the University of Pennsylvania, Nov 2012.

Benchmark data used in the component price level estimates for past PWTs. The published record of benchmark comparisons includes regional and world comparisons. These are described through 1985 in publications of the World Bank, including the published comparisons of the Penn group. The Penn World Table provides purchasing power parity and national income accounts converted to international prices for 189 countries/territories for some or all of the years 1950-2010.  Its expenditure entries are denominated in a common set of prices in a common currency so that real quantity comparisons can be made, both between countries and over time. It also provides information about relative prices within and between countries, as well as demographic data and capital stock estimates. The Penn World Table grew out of the United Nations International Comparison Programme (ICP) that was jointly directed by Irving Kravis at Penn through the first three phases ending with 1975 comparison (Kravis, Heston and Summers, 1982). PWT 7.1 Alan Heston, Robert Summers and Bettina Aten, Penn World Table Version 7.1, Center for International Comparisons of Production, Income and Prices at the University of Pennsylvania, Nov 2012.

Feenstra, Robert C., Robert Inklaar and Marcel P. Timmer (2013) PWT version 8.1 is a database with information on relative levels of income, output, inputs and productivity, covering 167 countries between 1950 and 2011.

Data in this domain constitute only a small part of the entire National Accounts data range available from Eurostat. Annual and quarterly national accounts are compiled in accordance with the European System of Accounts - ESA 2010as defined in Annex B of the Council Regulation (EU) No 549/2013 of the European Parliament and of the Council of 21 May 2013. The previous European System of Accounts, ESA95, was reviewed to bring national accounts in the European Union, in line with new economic environment, advances in methodological research and needs of users and the updated national accounts framework at the international level, the SNA 2008. The revisions are reflected in an updated Regulation of the European Parliament and of the Council on the European system of national and regional accounts in the European Union of 2010 (ESA 2010). The associated transmission programme is also updated and data transmissions in accordance with ESA 2010 are compulsory from September 2014 onwards. The annual data of this domain consists of the following collections: 1. Main GDP aggregates: main components from the output, expenditure and income side. nama_10_gdp: GDP and main components (output, expenditure and income   The quarterly data of this domain consists of the following collections 1. Main GDP aggregates, main components from the output, expenditure and income side, expenditure breakdowns by industry and assets. namq_10_ma: Main GDP aggregatesnamq_10_gdp: GDP and main components (output, expenditure and incomenamq_10_fcs: Final consumption aggregates by durabilitynamq_10_exi: Exports and imports by Member States of the EU/third countries 2. Breakdowns of GDP aggregates and employment data by main industries and asset classes. namq_10_bbr: Basic breakdowns main GDP aggregates and employment (by industry and assets)namq_10_a10: Gross value added and income by A*10 industrynamq_10_an6: Gross fixed capital formation by AN_F6 asset typenamq_10_a10_e: Employment by A*10 industry breakdowns Geographical entities covered are the European Union, the euro area, EU Member States, Candidate Countries, EFTA countries, US, Japan and possibly other countries on an ad-hoc basis. Data sources: National Statistical Institutes

The Principal Global Indicators (PGI) dataset provides internationally comparable data for the Group of 20 economies (G-20) and economies with systemically important financial sectors that are not members of the G-20. The PGI facilitates the monitoring of economic and financial developments for these jurisdictions. Launched in 2009, the PGI website is hosted by the IMF and is a joint undertaking of the Inter-Agency Group of Economic and Financial Statistics (IAG).

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Public Debt around the World: A New Dataset of Central Government Debt by Dany Jaimovich, Ugo Panizza. Inter-American Development Bank, Research Department, Working Paper 561, March 2006. Brief Description: Commonly used datasets on the level of public debt provide incomplete country and period coverage. It includes complete series of central government debt for 89 countries over the 1991-2005 period and for seven other countries for the 1993-2005 period. Years covered: 1991-2005.

20.1. Source data

The REER (or Relative price and cost indicators) aim to assess a country's (or currency area's) price or cost competitiveness relative to its principal competitors in international markets. Changes in cost and price competitiveness depend not only on exchange rate movements but also on cost and price trends. The indicator is deflated by the price index (total economy) against a panel of 42 countries (= EU28 + 14 other industrial countries: Australia, Canada, United States, Japan, Norway, New Zealand, Mexico, Switzerland, Turkey, Russia, China, Brazil, South Korea and Hong Kong). Double export weights are used to calculate REERs, reflecting not only competition in the home markets of the various competitors, but also competition in export markets elsewhere. A rise in the index means a loss of competitiveness. Data source: Directorate General for Economic and Financial Affairs (DG ECFIN). Data are non-seasonal adjusted.

Global growth declined in the first half of 2015, reflecting a further slowdown in emerging markets and a weaker recovery in advanced economies. It is now projected at 3.1 percent for 2015 as a whole, slightly lower than in 2014, and 0.2 percentage point below the forecasts in the July 2015 World Economic Outlook (WEO) Update. Prospects across the main countries and regions remain uneven. Relative to last year, growth in advanced economies is expected to pick up slightly, while it is projected to decline in emerging market and developing economies. With declining commodity prices, depreciating emerging market currencies, and increasing financial market volatility, downside risks to the outlook have risen, particularly for emerging market and developing economies. Global activity is projected to gather some pace in 2016. In advanced economies, the modest recovery that started in 2014 is projected to strengthen further. In emerging market and developing economies, the outlook is projected to improve: in particular, growth in countries in economic distress in 2015 (including Brazil, Russia, and some countries in Latin America and in the Middle East), while remaining weak or negative, is projected to be higher next year, more than offsetting the expected gradual slowdown in China.

For each OECD country, data are collected at two sub-national levels:Territorial level 2 (TL2), which refers to the 337 large regions of the OECD area.Territorial Level 3 (TL3), which refers to the 1709 small regions of the OECD area.In any analytical study conducted at sub-national levels, the choice of the territorial unit is of prime importance. The territorial grids used in this database are officially established and relatively stable in all member countries, and are used by many as a framework for implementing regional policies. Regions in OECD Member Countries have been classified according to two territorial levels (TL). The higher level (Territorial Level 2) consists of about 362 macro-regions while the lower level (Territorial Level 3) is composed of 1794 micro-regions.This classification - which, for European countries, is largely consistent with the Eurostat classification - facilitates greater comparability of regions at the same territorial level. The differences with the Eurostat NUTS classification concern Belgium, Greece and the Netherlands where the NUTS 2 level correspond to the OECD TL3 and Germany where the NUTS1 corresponds to the OECD TL2 and the OECD TL3 corresponds to 97 spatial planning regions (Groups of Kreise). For the United Kingdom the Eurostat NUTS1 corresponds to the OECD TL2.Due to limited data availability, labour market indicators in Canada and Australia are presented for a different grid (groups of TL3 regions in the case of Canada). Since these breakdowns are not part of the OECD official territorial grids, for the sake of simplicity they are labelled as Non Official Grids (NOG).National values have been computed based on regional estimates. For this reason, it is possible that in some cases these values differ from national statistics.

This domain provides users with data concerning Government Budget Appropriations or Outlays on R&D (GBAORD). GBAORD data are measuring government support to research and development (R&D) activities, or, in other words, how much priority Governments place on the public funding of R&D. GBAORD data are built up using the guidelines laid out in the Proposed standard practice for surveys of research and experimental development - Frascati Manual, OECD, 2002 . GBAORD data are broken down by:   - Socio-economic objectives (SEOs) in accordance to the Nomenclature for the analysis and comparison of scientific programmes and budgets (NABS 2007) - .   - Funding mode into: project funding and institutional funding (non-mandatory data). Part of GBAORD, which is allocated to transnational cooperation in R&D, is further broken down into three specific categories: transnational public R&D performers; Europe-wide transnational public R&D programmes and bilateral or multilateral public R&D programmes established between Member State governments or with EFTA and candidate countries. Besides in basic unit National currency (MIO_NAC) the following units are available: Euro (MIO_EUR), Euro per inhabitant (EUR_HAB) Purchasing Power Standard (MIO_PPS), Purchasing Power Standard at 2005 prices (MIO_PPS_KP05), Purchasing Power Standard per inhabitant at constant 2005 prices (PPS_ HAB_KP05), Percentage of GDP (PC_GDP), Percentage of total GBAORD (PC_GBA - for the breakdowns by socio-economic objectives and by funding mode), Percentage of total transnationally coordinated R&D (PC_TOT - for the breakdown by category), Percentage of government expenditure (PC_GEXP). The periodicity of the GBAORD data is annual. Data are collected corresponding to the two legally established deadlines:   - June data collection: Preliminary GBAORD data are provided to Eurostat 6 months after the end of the calendar year (June). This data are targeted to be disseminated in Eurobase in September.   - December data collection: Final GBAORD data are provided to Eurostat 12 months after the end of the calendar year (December). This data are targeted to be disseminated in Eurobase in the following February. GBAORD data are available for following countries and country groups:   - All EU Member States, Iceland, Norway, Switzerland,  Turkey, the Russian Federation, Japan, the United States and South Korea.   - Country groups: EU28, EU15 and EA18.

The domain "Income and living conditions" covers four topics: people at risk of poverty or social exclusion, income distribution and monetary poverty, living conditions and material deprivation, which are again structured into collections of indicators on specific topics. The collection "People at risk of poverty or social exclusion" houses main indicator on risk of poverty or social inclusion included in the Europe 2020 strategy as well as the intersections between sub-populations of all Europe 2020 indicators on poverty and social exclusion. The collection "Income distribution and monetary poverty" houses collections of indicators relating to poverty risk, poverty risk of working individuals as well as the distribution of income. The collection "Living conditions" hosts indicators relating to characteristics and living conditions of households, characteristics of the population according to different breakdowns, health and labour conditions, housing conditions as well as childcare related indicators. The collection "Material deprivation" covers indicators relating to economic strain, durables, housing deprivation and environment of the dwelling.

Day-to-day money market interest rates: averages for the euro area (EONIA= Euro OverNight Index Average), EU27 (theoretical aggregate), and national series (TR, CA, US, JP). 1-month, 3-month, 6-month and 12-month interest rates: averages for the euro area (EURIBOR) and EU27 (theoretical aggregate). 3-month interest rates are also available for the US and Japan.

Day-to-day money market interest rates: averages for the euro area (EONIA= Euro OverNight Index Average), EU27 (theoretical aggregate), and national series (TR, CA, US, JP). 1-month, 3-month, 6-month and 12-month interest rates: averages for the euro area (EURIBOR) and EU27 (theoretical aggregate). 3-month interest rates are also available for the US and Japan.

Social benefits consist of transfers, in cash or in kind, by social protection schemes to households and individuals to relieve them of the burden of a defined set of risks or needs. The functions (or risks) are: sickness/healthcare, disability, old age, survivors, family/children, unemployment, housing, social exclusion not elsewhere classified (n.e.c).

Social benefits consist of transfers, in cash or in kind, by social protection schemes to households and individuals to relieve them of the burden of a defined set of risks or needs.

CDS-implied sovereign default probabilities for various recovery rate assumptions computed by Deutsche Bank Research Team from CDS spreads. For more information about computation consult DB Research notes

Global data on individuals, firms, and the business environments.

This collection provides users with data concerning R&D expenditure and R&D personnel broken down by following institutional sectors: business enterprise (BES), government (GOV), higher education (HES), private non-profit (PNP) with the total of sectors. All data are broken down by the above mentioned sectors of performance. The R&D expenditure is further broken down by source of funds, by type of costs, by economic activity (NACE Rev.2), by size class, by type of R&D, by fields of science, by socio-economic objectives and by regions (NUTS 2 level). Besides R&D expenditures in basic unit National currency (MIO_NAC) the following units are available: Euro (MIO_EUR), Euro per inhabitant (EUR_HAB) Purchasing Power Standard (MIO_PPS), Purchasing Power Standard at 2005 prices (MIO_PPS_KP05), Purchasing Power Standard per inhabitant at constant 2005 prices (PPS_KP05_HAB), Percentage of GDP (PC_GDP) and Percentage of total R&D expenditure (PC_TOT - for the breakdown by source of funds). R&D personnel data is available in full-time equivalent (FTE), in head count (HC), as a % of employment and as a % of labour force. The data is further broken down by occupation, by qualification, by gender, by size class, by citizenship, by age groups, by fields of science, by economic activity (NACE Rev.2) and by regions (NUTS 2 level). The periodicity of R&D data is biennial except for the key R&D indicators (R&D expenditure, R&D personnel and Researchers by sectors of performance) which are transmitted annually by the EU Member States on the basis of a legal obligation from 2003 onwards. Some other breakdowns of the data may appear on annual basis based on voluntary data provisions. The data are collected through sample or census surveys, from administrative registers or through a combination of sources. R&D data are available for following countries and country groups: - All EU Member States, plus Candidate Countries, EFTA Countries, the Russian Federation, China, Japan, the United States and South Korea. - Country groups: EU-28, EU-15 and EA-18. R&D data are compiled in accordance to the guidelines laid down in the Proposed standard practice for surveys of research and experimental development - Frascati Manual (FM), OECD, 2002 .

Industry, Trade and Services statistics are part of Short-term statistics (STS), they give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification(Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are presented in the following forms: UnadjustedCalendar adjustedSeasonally-adjusted Depending on the STS regulation, data are accessible monthly and quarterly. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction Index*Turnover IndexProducer Prices (Domestic Output Prices index)*Import Prices Index*: Total, Euro area market, Non euro area market (euro area countries only)Labour Input Indicators: Number of Persons Employed, Hours Worked, Gross Wages and SalariesCONSTRUCTIONProduction Index*: Total of the construction sector, Building construction, Civil EngineeringLabour input indicators: Number of Persons Employed, Hours Worked, Gross Wages and SalariesConstruction costs IndexBuilding permits indicators*: Number of dwellingsWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (in value)Labour input indicators: Number of Persons EmployedSERVICES  Turnover Index* Producer prices (Ouput prices)*

UNECE Economic indicators. Comparable data for 52 countries and 7 groups of countries.

The United Nations Economic Commission for Europe (UNECE) is one of the five regional commissions of the United Nations. It is the forum where the countries of western, central and eastern Europe, central Asia and North America – 56 countries in all – come together to forge the tools of their economic cooperation. That cooperation concerns such areas as economic cooperation and integration, energy, environment, human settlements, population, statistics, timber, trade, and transport.

The United Nations Economic Commission for Europe (UNECE) is one of the five regional commissions of the United Nations. It is the forum where the countries of western, central and eastern Europe, central Asia and North America – 56 countries in all – come together to forge the tools of their economic cooperation. That cooperation concerns such areas as economic cooperation and integration, energy, environment, human settlements, population, statistics, timber, trade, and transport.

This dataset contains short-term prospects for the global economy in 2016-2017   Project LINK is an international collaborative research group for econometric modelling, coordinated jointly by the Development Policy and Analysis Division of UN/DESA and the University of Toronto. Each year, a UN/DESA Expert Group Meeting on the World Economy, also known as the Project LINK Meeting, is held in October to discuss the world economic outlook. The meeting is participated in by a wide range of experts from academia, economic research institutions and international economic organizations as well as United Nations colleagues from the regional commissions of ECA, ECE, ECLAC, ESCAP and ESCWA. Global Economic Outlook presents the short-term prospects for the global economy in 2016 and 2017, including major risks and policy challenges. The report draws on inputs from the experts of Project LINK, as well as analysis of staff in the Global Economic Monitoring Unit of the Development Policy and Analysis Division (DPAD) of UN/DESA.

Basic data on output and employment, WIOD database, July 2014 release. Data on employment (number of workers and educational attainment), capital stocks, gross output and value added at current and constant prices at the industry level.

Providing daily updates of global economic developments, with coverage of high income- as well as developing countries. Daily data updates are provided for exchange rates, equity markets, interest rates, stripped bond spreads, and emerging market bond indices. Monthly data coverage (updated daily and populated upon availability) is provided for consumer prices, high-tech market indicators, industrial production and merchandise trade.

The World Bank's twice-yearly Global Economic Prospects examines growth trends for the global economy and how they affect developing countries. The reports include three-year forecasts for the global economy and long-term global scenarios which look ten years into the future.

The primary World Bank collection of development indicators, compiled from officially-recognized international sources. It presents the most current and accurate global development data available, and includes national, regional and global estimates.