Тайвань

Data are provided in million national currency (for the euro zone, pre-EMU euro or EUR), million current PPP USD and million constant USD (2005 prices and PPPs). Variables collected This table presents research and development (R&D) expenditure statistics performed in the business enterprise sector by industry according to the International Standard Industrial Classification (ISIC) revision 3.1. and by source of funds (business enterprise, government, other national funds, and funds from abroad). Data at the industry level are presented beginning 1987, year when most of the countries converted from ISIC rev.2 to the current ISIC rev. 3 classification. This breakdown between industries is, in principle, made at the enterprise level, although some countries are able to break down R&D data for multi product enterprises between their main lines of business. National statistical regulations prevent publication of results where there are very few firms in the given category, hence the many gaps in the tables. Depending on the country, R&D institutes serving enterprises are either classified with the industry concerned, or grouped under “Research and Development” (ISIC rev.3.1, Division 73). When these R&D institutes are classified with the industry served, the evaluation of R&D in these industries is more complete and more comparable between countries for the industries concerned. This results, however, in an underestimation of the percentage of BERD performed by the service sector as compared with other countries. The Frascati Manual recommendation concerning data on R&D by industry is to report BERD on an enterprise basis (see FM section 3.4). When this is interpreted strictly, all the BERD of a diversified enterprise will be allocated to the industrial class of its principal activity. In circumstances where a few large firms dominate R&D spending in several areas, this can and does lead to underestimates of R&D associated with the secondary activities of the firms. Overall, R&D is therefore overestimated for some industries and underestimated for others. However, not all countries follow a strict enterprise basis for allocating R&D expenditures to industrial classes. Some countries make a disaggregation of the R&D of their largest, diversified firms into a number of different activities. In other countries, the enterprise approach has been abandoned and data are reported on a product field basis. This is why two classification criteria for BERD by industry are included in the table “BERD by industry” (see the variable CLASSIFICATION CRITERIA: Main activity or Product field) depending on which approach is more closely followed by each country (only a few countries currently collect these data both ways and are therefore included according to both criteria). However, this table “BERD by industry and source of funds” and the one that follows, “BERD by industry and type of costs” present data for only one of the criteria, depending on the country.

Data are provided in million national currency (for the euro zone, pre-EMU euro or EUR), million current PPP USD and million constant USD (2000 prices and PPPs). Variables collected This table presents research and development (R&D) expenditure statistics performed in the business enterprise sector by industry according to the International Standard Industrial Classification (ISIC) revision 3.1. and by type of costs (current expenditure, capital expenditure). Data at the industry level are presented beginning 1987, year when most of the countries converted from ISIC rev.2 to the current ISIC rev. 3 classification. This breakdown between industries is, in principle, made at the enterprise level, although some countries are able to break down R&D data for multi product enterprises between their main lines of business. National statistical regulations prevent publication of results where there are very few firms in the given category, hence the many gaps in the tables. Depending on the country, R&D institutes serving enterprises are either classified with the industry concerned, or grouped under “Research and Development” (ISIC rev.3.1, Division 73). When these R&D institutes are classified with the industry served, the evaluation of R&D in these industries is more complete and more comparable between countries for the industries concerned. This results, however, in an underestimation of the percentage of BERD performed by the service sector as compared with other countries. The Frascati Manual recommendation concerning data on R&D by industry is to report BERD on an enterprise basis (see FM section 3.4). When this is interpreted strictly, all the BERD of a diversified enterprise will be allocated to the industrial class of its principal activity. In circumstances where a few large firms dominate R&D spending in several areas, this can and does lead to underestimates of R&D associated with the secondary activities of the firms. Overall, R&D is therefore overestimated for some industries and underestimated for others. However, not all countries follow a strict enterprise basis for allocating R&D expenditures to industrial classes. Some countries make a disaggregation of the R&D of their largest, diversified firms into a number of different activities. In other countries, the enterprise approach has been abandoned and data are reported on a product field basis. This is why two classification criteria for BERD by industry are included in the table “BERD by industry” (see the variable CLASSIFICATION CRITERIA: Main activity or Product field) depending on which approach is more closely followed by each country (only a few countries currently collect these data both ways and are therefore included according to both criteria). However, this table “BERD by industry and type of costs” and the preceding one “BERD by industry and source of funds” present data for only one of the criteria, depending on the country.

The Global Innovation Index (GII) aims to capture the multi-dimensional facets of innovation and provide the tools that can assist in tailoring policies to promote long-term output growth, improved productivity, and job growth. The GII helps to create an environment in which innovation factors are continually evaluated. It provides a key tool and a rich database of detailed metrics for 141 economies this year, which represent 95.1% of the world’s population and 98.6% of global GDP.

This table contains research and development (R&D) expenditure statistics on gross domestic R&D expenditure by sector of performance (business enterprise, government, higher education, private non-profit, and total intramural) and by field of science (natural sciences, engineering, medical sciences, agricultural sciences, social sciences, and humanities). Data are provided in million national currency (for the euro zone, pre-EMU euro or EUR), million current PPP USD and million constant USD (2005 prices and PPPs).

Unit of measure used Data are provided in million national currency (for the euro zone, pre-EMU euro or EUR), million current PPP USD and million constant USD (2005 prices and PPPs). Variables collected This table presents data on Gross domestic expenditure on R&D (GERD) by socio-economic objective (SEO), using the NABS 2007 classification i.e.: Exploration and exploitation of the Earth, Environment, Exploration and exploitation of space, Transport, telecommunication and other infrastructures, Energy, Industrial production and technology, Health, Agriculture, Education, Culture, recreation, religion and mass media, Political and social systems, structures and processes, General advancement of knowledge, and Defence. Please note that in this new NABS 2007 classification, the three socio-economic objectives -- Education, Culture, recreation, religion and mass media, and Political and social systems, structures and processes -- were previously grouped under a single objective: Social structures and relationships. At the time of this publication there is no breakdown of historical data into the three new SEOs. Another issue relating to the transition from NABS 1993 to NABS 2007 is that what was formerly Other civil research is now to be distributed among the other chapters. This distribution has not yet been done in this database. Therefore, until the countries are in a position to provide breakdown according to the NABS 2007 classification, in some cases GERD by SEO is greater than the sum of its chapters.

Data are provided in million national currency (for the euro zone, pre-EMU euro or EUR), million current PPP USD and million constant USD (2005 prices and PPPs). Variables collected This table presents research and development (R&D) expenditure statistics. Data include gross domestic R&D expenditure by sector of performance (business enterprise, government, higher education, private non-profit, and total intramural) and by type of costs (current expenditures: labour costs, other current costs; and capital expenditures: land and buildings, and instruments and equipment).

Patents reflect a country's inventive activity. Patents also show the country's capacity to exploit knowledge and translate it into potential economic gains. In this context, indicators based on patent statistics are widely used to assess the inventive performance of countries. This domain provides users with data concerning patent applications to the European Patent Office - EPO, patents granted by the United States Patent and Trademark Office - USPTO and triadic patent families. EPO data refer to all patent applications by priority year as opposed to patents granted by priority year, which is the case of USPTO data.Patents reflect a country's inventive activity. Patents also show the country's capacity to exploit knowledge and translate it into potential economic gains. In this context, indicators based on patent statistics are widely used to assess the inventive performance of countries.

This database, published twice a year, provides a set of indicators that reflect the level and structure of the efforts undertaken by OECD Member countries and selected non-member economies in the field of Science and Technology as available from 1981 onwards. It includes final or provisional results as well as forecasts established by government authorities. Indicators cover resources devoted to research and development, patent families, technology balance of payments and international trade in highly R&D-intensive industries. Also presented are the underlying economic series used to calculate these indicators. Indicators on R&D expenditures, budgets and personnel are derived from the OECD's Research and Development Statistics (RDS) database, which is based on the data reported to OECD and Eurostat in the framework of the joint OECD/Eurostat international data collection on resources devoted to R&D. The sources for the other indicators include the OECD databases on Activities of Foreign Affiliates (AFA), on Bilateral Trade in Goods by Industry and End-use Category database (BTDIxE), on Patents and on Technological Balance of Payments (TBP). YEARS COVERED: 1981 onward. COUNTRIES COVERED: Australia, Austria, Belgium, Canada, Chile, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Israel, Italy, Japan, Korea, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Turkey, United Kingdom, and United States. NON-MEMBER ECONOMIES: Argentina, China, Romania, Russian Federation, Singapore, South Africa and Chinese Taipei.

The OECD Science, Technology and Industry Outlook reviews key trends in STI policies and performance in OECD countries and major emerging economies. It is published every two years and draws on a unique international policy survey conducted by the OECD - with more than 45 countries involved in 2014 - and the latest OECD work on STI policy analysis and measurement. Following an overview of the recent STI global landscape, key current policy issues are discussed across a series of thematic policy profiles. Country profiles report the STI performance of individual countries and the most recent national policy developments.

This table contains statistics on research and development ( R&D) expenditure performed in the higher education and private non-profit sectors by field of science (natural sciences, engineering, medical sciences, agricultural sciences, social sciences, and humanities) and source of funds (direct government, public general university funds, higher education, private non-profit, business enterprise, and funds from abroad). Data are provided in million national currency (for the euro zone, pre-EMU euro or EUR), million current PPP USD and million constant USD (2005 prices and PPPs).

Data collected from table 4-16,4-18

This table contains research and development (R&D) expenditure statistics on current domestic R&D and gross domestic R&D expenditures by sector of performance (business enterprise, government, higher education, private non-profit, and total intramural) and by type of R&D within each sector (basic research, applied research, experimental development, non-specified, and total activity).Unit of measure used - Data are provided in million national currency (for the euro zone, pre-EMU euro or EUR), million current PPP USD and million constant USD (2005 prices and PPPs).

This table presents research and development (R&D) personnel statistics. Number of R&D personnel is provided in headcounts and/or full-time equivalent on R&D by sex, sector of employment (business enterprise, government, higher education, and private non-profit) and by formal qualification (university and other diplomas by ISCED classification). Unit of measure used - Headcounts and/or Full-time equivalent on R&D (FTE)

Data collected from table 5-55 to 5-57

The OECD’s ANalytical Business Enterprise Research and Development (ANBERD) database presents annual data on R&D expenditures by industry and was developed to provide analysts with comprehensive data on industrial R&D expenditures that address the problems of international comparability and breaks in the time series of official business enterprise R&D data. The ANBERD database includes a number of estimations and is published under the responsibility of the Secretary General of the OECD as it does not represent Member countries’ official submissions of business enterprise R&D data. The current version of the ANBERD database presents industrial R&D expenditure data broken down in up to 100 manufacturing and services sectors for OECD countries and selected non-member economies from 1987 onwards. For the first time, the reported data are in ISIC Revision 4 and are expressed in national currencies as well as in PPP US dollars, both at current and constant prices. The ANBERD data are updated continuously on a rolling basis and additional countries will be included in the coming months as they become available.

Data collected from table 5-25 to 5-54, 5-58

1. USPTO:- U.S. Patent and Trademark Office 2. IPC:- International Patent Classification 3. Patents are fractionally allocated among regions/countries/economies based on the proportion of residences of all named inventors 4. The EU includes 28 member countries and China includes Hong Kong. 5. Patents are classified under the World Intellectual Property Organization (WIPO) classification of patents 6.Data collected from table 6-36 to 6-50, 6-65 to 6-79